Sioux Chief 870-6 6" Stainless...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.94
Sioux Chief 870-6 6" Stainless Steel Standard Wall Cleanout Cover

Sioux Chief 870-6 6" Stainless Steel Standard Wall Cleanout Cover

(No reviews yet) Write a Review

Model: 870-6

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.94
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 870-6 6" Stainless Steel Standard Cleanout Cover

The Sioux Chief 870-6 is a durable stainless steel cover designed for wall cleanout access, giving plumbers and contractors a corrosion-resistant finish cover for rough-in cleanout fittings. Sized at 6", this standard cleanout cover is built to hold up to repeated service access while presenting a clean, finished appearance at the wall. As part of Sioux Chief's cleanout cover line, the 870-6 is a straightforward, job-ready component for any DWV cleanout assembly requiring periodic access for snaking or inspection.

Key Features

  • Trade Size: 6" cover sized for standard wall cleanout access fittings.
  • Durable Construction: Stainless steel construction resists corrosion and withstands repeated removal and reinstallation at the wall access point.
  • Standard Cleanout Cover: Designed specifically to cap and conceal wall cleanout fittings in rough-in DWV installations.
  • Finished Appearance: Provides a clean, uniform wall-mounted appearance over the cleanout opening while still allowing access when needed.

Technical Specifications

  • Country of Origin: China
  • Material: Stainless Steel
  • Trade Size: 6"
  • Packaging: 25 EA per case

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • Wall Cleanout Access Points for DWV Systems
  • Renovation and New Construction Plumbing
  • Replacement Cover for Existing Wall Cleanouts

Why Sioux Chief?

Sioux Chief builds plumbing rough-in components that contractors rely on for consistent fit and finish on the job site. The stainless steel construction of the 870-6 cover is chosen for its resistance to corrosion at wall access points, giving installers a durable, long-lasting cleanout cover for both new construction and renovation work.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Cleanout Cover
Country of Origin:
China
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Drains and Cleanouts
Product Material:
Stainless Steel
Product Size:
6"

Sioux Chief 870-6 – Frequently Asked Questions

1) What size cleanout does the Sioux Chief 870-6 cover fit?
The 870-6 is a 6 inch trade size cover, made to go over a standard 6 inch wall cleanout access fitting. If the cleanout plug and access fitting in your wall are a different trade size, the cover will not seat correctly, so match the cover size to the fitting size rather than to the rough wall opening.
2) Can I use the Sioux Chief 870-6 to replace a rusted cover on an existing wall cleanout?
That is one of its stated uses. The 870-6 works as a replacement cover for existing wall cleanouts as long as the cleanout is a 6 inch trade size. Pull the old cover first and confirm the fitting size, since a 6 inch cover will not pick up a smaller access fitting.
3) Does the 870-6 cover seal the drain line, or do I still need a cleanout plug?
The cover is a finish piece, not a seal. It caps and conceals the wall cleanout opening and gives a clean finished appearance while still allowing access, so the cleanout fitting and its plug still do the work of closing off the DWV line. Order the access fitting and plug separately.
4) Will a stainless cleanout cover hold up in a damp or corrosive location like a laundry or mechanical room?
Stainless steel is the material here, chosen for corrosion resistance at wall access points, so it holds up better than a plated steel cover in damp areas and takes repeated removal and reinstallation when the line gets snaked. That makes it a reasonable standardization choice for multi-family and commercial restroom or utility walls.
5) What is the manufacturer part number for the 6 inch Sioux Chief stainless wall cleanout cover?
Order it as Sioux Chief 870-6. That is the full MPN for the 6 inch stainless steel standard wall cleanout cover, and the number distributors and counter staff will recognize.
How fast can I get the Sioux Chief 870-6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 870-6 come with a warranty?
Absolutely. The Sioux Chief 870-6 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 870-6?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 870-6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!