Sioux Chief 889-45PM 3" PVC Closet Flange with 45° Stainless Steel Swivel Ring
The Sioux Chief 889-45PM is a 3" PVC closet flange built for rough-in connections between a toilet and the 3" PVC drain-waste-vent (DWV) pipe or closet bend. The flange terminates in a spigot (SPGT) end sized to solvent-weld directly into 3" PVC pipe, and it carries a stainless steel swivel ring that rotates in 45° increments so the closet bolt slots can be aligned to the fixture during set. Manufactured in the United States, this flange is intended for behind-the-wall and under-floor rough-in plumbing work, not as a finished decorative fitting.
Key Features
- Trade Size: 3" spigot outlet sized for direct solvent-weld connection into 3" PVC DWV pipe or closet bend.
- PVC Body: Molded PVC construction resists corrosion from waste-line moisture and is compatible with standard PVC DWV rough-in systems.
- Spigot Connection: SPGT end fits inside the receiving pipe hub for a clean, in-line solvent-weld joint during rough-in.
- 45° Stainless Steel Swivel Ring: The ring rotates in 45° increments independent of the flange body, letting the installer index the closet bolt slots to the fixture without rotating the whole flange.
- Corrosion-Resistant Ring: Stainless steel construction on the swivel ring holds up at the finished floor surface where it stays exposed after installation.
- Made in the USA: Manufactured in the United States.
- Packaging: Packed 20 EA per carton for distributor and contractor stock.
Technical Specifications
- Country of Origin: United States
- Packaging: 20 EA per carton
- Trade Size: 3" Spigot
- Material: PVC body with stainless steel swivel ring
Typical Applications
- Toilet (Water Closet) Rough-In Installations
- Residential and Commercial DWV Plumbing
- New Construction and Remodel Plumbing
- PVC Drain, Waste & Vent (DWV) Pipe Systems
Why Sioux Chief?
Sioux Chief builds this closet flange from PVC with a stainless steel swivel ring, pairing a corrosion-resistant body with a ring designed to hold up at the finished floor line. The 45° swivel adjustment gives plumbers a practical way to square up closet bolts on a 3" spigot connection without reworking the pipe joint, and manufacturing in the United States keeps this rough-in fitting readily stocked for new construction and remodel work.
Manufacturer Resources
Product Specs
- Product Type:
- Closet Flange
- Connection Type:
- Spigot
- Configuration:
- 45° Swivel
- Product Finish:
- Stainless Steel
- Country of Origin:
- United States
- Department:
- Plumbing
- Product Group:
- Rough-In and Supports
- Product Subgroup:
- Drains and Cleanouts
- Product Material:
- PVC
- Product Size:
- 3"