Sioux Chief 926 Snap-One Split-Design Poly Floor & Ceiling Plate, 1/2" CTS

Sioux Chief 926 Snap-One Split-Design Poly Floor & Ceiling Plate, 1/2" CTS

The Sioux Chief 926 Snap-One is a split-design poly floor & ceiling plate sized for 1/2" CTS pipe, built to dress the spot where a supply or waste line passes through a finished floor or ceiling on a rough-in job. Because the plate is split, the snap-one body closes around pipe that is already run, which is exactly what a plumber needs on a pre-piped job where the line is set before the cover arrives. The poly body is 100% rust proof, so it holds up in the damp, behind-the-wall conditions where a stamped metal plate would eventually corrode, and the 926 is available in Chrome and White finishes to match the surrounding fixtures in new construction or a remodel.

Key Features

• Trade Size: Sized to fit 1/2" CTS pipe at floor and ceiling penetrations.
• Durable Construction: Poly body that is 100% rust proof, holding up where stamped metal plates corrode over time in wet rough-in locations.
• Split Design: Split construction built for pre-piped jobs, so the plate snaps around pipe that is already installed instead of requiring the line to be disconnected or cut back.
• Snap-One Design: Snap-one construction lets a plumber close the plate around the pipe by hand, speeding up the finish-out step on a rough-in job.
• Finish Options: Available in Chrome and White, giving the pipe penetration a clean, uniform look at the floor or ceiling instead of a bare plastic edge.
• Concealment: Covers the gap around the pipe penetration, keeping the floor or ceiling opening neat where the supply or waste line passes through.

Technical Specifications

• Trade Size: 1/2" CTS
• Product Material: Poly, 100% rust proof
• Configuration: Snap-One Split Design
• Country of Origin: Taiwan
• Packaging: 1 per bag, packed 120 EA per case.

Typical Applications

• Residential and Commercial Rough-In Plumbing
• Floor and Ceiling Pipe Penetrations for 1/2" CTS Supply Lines
• Pre-Piped Renovation Jobs Where the Line Is Already Set
• New Construction Cover Plates Behind Finished Floors and Ceilings
• Replacement of Corroded or Cracked Metal Escutcheon Plates

Why Sioux Chief?

Sioux Chief builds rough-in plumbing hardware that plumbers and contractors rely on for straightforward, dependable installations. The 926 Snap-One plate's rust proof poly construction and split, snap-one design carry through that same focus on practical parts that go in fast and hold up behind the wall or under the floor. Offered in Chrome and White, it finishes the pipe penetration cleanly without the corrosion concerns that come with a stamped metal cover plate in a damp rough-in location, giving contractors a consistent, code-friendly option across residential and commercial rough-in jobs.