Progress Lighting P4761-141 Six-light Chandelier

Yes. The Turnbury P4761-141 is a chain-hung ceiling fixture and the description states it can be used on a sloped ceiling. It ships with 72 inches of 9 gauge chain and 180 inches of wire, so overall height with chain can reach 103.5 inches before you start removing links. Mount location is ceiling chain only, so it has no rigid stem or wall bracket option.

The Turnbury six-light chandelier measures 26 x 26 x 28.75 inches, with the 26 inch figure being a diameter. That footprint suits a foyer, a dining table, or a kitchen island run, which is what Progress calls out for it. For a standard island, keep roughly equal clearance on both sides of the 26 inch diameter and set the chain so the bottom sits above sightlines.

Bulbs are not included. You need six candelabra base B10 lamps rated 60 W maximum each, for 360 W total on a 120 V circuit. The fixture is fully dimmable if you use dimmable bulbs, so LED candelabra lamps work as long as they are dimmer rated and matched to your dimmer.

Mounting hardware and installation instructions are in the box, including a strap for the outlet box. The fixture is prewired and hardwired to a 120 V supply, so no plug or cord set is involved. At 20.24 lb it does not exceed NEC weight limits per the manufacturer data, so a standard listed fixture outlet box is adequate.

No. It is UL and cUL listed for dry locations only and classified as an indoor fixture. Keep it out of covered porches, open entry soffits, bathrooms over tubs or showers, and anywhere it can see moisture. For a coastal exterior entry you need a damp or wet location listed fixture instead.

Galvanized finish, generic color grey. A distressed solid wood frame surrounds a hand-painted galvanized metal light cluster, so the look blends wood tone with grey metal rather than being all metal. Progress catalogs it in the Turnbury collection with coastal, farmhouse and rustic styling, so it pairs with other Turnbury pieces for consistency across a lobby and dining area.

No. The Turnbury P4761-141 is not Buy American compliant and not ARRA compliant, and country of origin is China. It also carries a Proposition 65 warning requirement. For federally funded work with domestic sourcing language in the spec, this fixture will not qualify.

No on both counts. It is not Energy Star certified, not JA8 listed, and not Title 24 compliant, and it is not flagged as an energy efficient fixture. It does carry Title 20 compliance. Because lamps are sold separately, California residential work needing JA8 sources has to be handled through the bulb selection, not the fixture listing.

Six phenolic sockets take candelabra base B10 lamps at 60 W maximum. Phenolic bodies handle the heat of incandescent candelabra bulbs, and since the fixture is fully dimmable with dimmable bulbs, dimmable LED candelabra lamps are fine and run well under the wattage cap.

It ships one per carton, each, with an order multiple of 1. The carton measures 11.400 x 30.300 x 30.800 inches and the fixture itself weighs 20.24 lb, so plan receiving space accordingly when you take a unit count for a corridor or unit rollout.

Yes, the fixture comes prewired with a copper tinned ground wire, so you can bond it to the box or branch circuit equipment ground on a 120 V hardwired connection. Total wire length supplied is 180 inches, matching the 72 inches of chain.