You may also like
Spears HSxHS PVC Hose Coupling, Hose-to-Hose Connector
The Spears HSxHS PVC Hose Coupling is a hose-to-hose fitting molded from durable PVC, designed to join two lengths of hose into a single continuous run. This coupling is available in 1/2", 5/8", and 3/4" sizes and is packaged 100 ea for distributors, contractors, and MRO stock programs. Its all-PVC construction resists corrosion and chemical attack, making it a reliable choice anywhere hose sections need a secure, leak-resistant connection.
Key Features
- Trade Size Range: Available in 1/2", 5/8", and 3/4" sizes to match common hose diameters used in irrigation, water transfer, and general-purpose hose runs.
- Durable Construction: Molded PVC body resists corrosion, rust, and chemical degradation compared to metal fittings, extending service life in wet or exposed environments.
- Hose x Hose Configuration: HSxHS design allows two hose ends to be joined directly, creating a continuous, uninterrupted hose run without adapters.
- Lightweight Design: PVC construction keeps the coupling lightweight for easy handling and installation compared to brass or steel alternatives.
- Versatile Compatibility: Sized to fit standard hose diameters, allowing use across residential, agricultural, and industrial hose assemblies.
- Bulk Packaging: Supplied 100 ea per package, suited for distributor resale, maintenance stock, and high-volume installation projects.
- Non-Corrosive Material: PVC will not rust or pit, making it well suited to outdoor, agricultural, and water-handling applications where metal fittings would degrade over time.
Technical Specifications
- Product Material: PVC
- Configuration: Hose x Hose (HSxHS)
- Available Sizes: 1/2", 5/8", 3/4"
Typical Applications
- Hose Repair and Extension Runs
- Irrigation and Agricultural Water Systems
- General-Purpose Water Transfer Hoses
- Maintenance, Repair, and Operations (MRO) Stock
- Distributor Resale and Bulk Hose Assembly
Why Spears?
Spears is recognized for producing PVC fittings built for consistent, reliable performance across plumbing and fluid-handling applications. This PVC hose coupling, available across 1/2", 5/8", and 3/4" sizes, reflects that same focus on non-corrosive, chemical-resistant construction, giving installers a dependable way to join hose sections without introducing metal components that can corrode over time. Choosing Spears means specifying a fitting built for long-term, low-maintenance service across every available size.
Manufacturer Resources
PVC Irrigation Specialty Products (Schedule 40)
Product Specs
- Product Type:
- Hose Coupling
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Material:
- PVC
- Configuration:
- Hose x Hose
- Product Subgroup:
- Couplings
- Product Size:
- 1/2" - 3/4"
- Connection Type:
- Hose x Hose
Spears SPRC44 – Frequently Asked Questions
1) Which hose size do I order for the Spears C44 hose coupling, and what are the part numbers?
The Spears HSxHS PVC hose coupling comes in three hose sizes: 1/2 inch is part number C44, 5/8 inch is C55, and 3/4 inch is C66. Match the number to the inside diameter of the hose you are splicing, since the fitting is sized to insert into standard hose of that diameter. Ordering one size up or down means the barb either will not enter the hose or will not seal.
2) Can I use this Spears coupling to splice a cut garden or irrigation hose back together?
That is exactly what it does. The HSxHS configuration takes a hose end on each side, so you cut out the damaged section and join the two good ends into one continuous run without any adapter in between. It is a mender, not a thread fitting, so neither end will screw onto a spigot or a hose-thread nozzle.
3) Do I need clamps with this PVC hose coupling, or does it seal on its own?
The coupling is the insert only. Plan on a pair of hose clamps, one per side, to hold each hose end onto the fitting and make the joint leak tight. Clamps are not part of the coupling.
4) Is the Spears hose mender PVC or metal, and will it hold up buried or outdoors in irrigation service?
The body is molded PVC, not brass or steel, so it will not rust or pit in wet, outdoor, or agricultural service and it resists chemical attack. It is also lighter to handle than a metal mender. The tradeoff is PVC's lower impact strength, so it is better suited to hose runs than to spots that take mechanical abuse.
5) Can I join two different hose sizes, like 1/2 inch to 5/8 inch, with this coupling?
Not with this one. Each part number is a same-size coupling, 1/2 to 1/2 (C44), 5/8 to 5/8 (C55), or 3/4 to 3/4 (C66). Stepping between two hose diameters calls for a reducing or adapter fitting instead.
6) How is the Spears C-series hose coupling packaged for distributor or MRO stock?
It ships 100 each per package, which is why it fits distributor resale, maintenance crib stock, and high-volume irrigation work rather than one-off counter sales. If you stock all three sizes, you are carrying C44, C55, and C66 as separate items.
How fast can I get the Spears SPRC44 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears SPRC44 come with a warranty?
Absolutely. The Spears SPRC44 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears SPRC44?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Spears SPRC44 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.