Spears PVC DWV Double Wye Fitt...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$13.84
Spears PVC DWV Double Wye Fitting, Hub x Hub x Hub x Hub Connections

Spears PVC DWV Double Wye Fitting, Hub x Hub x Hub x Hub Connections

(No reviews yet) Write a Review

Model: P611-015

In Stock (leaves warehouse same day if ordered before 3pm ET)

$13.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Spears PVC DWV Double Wye Fitting, Hub x Hub x Hub x Hub Connections

The Spears PVC DWV Double Wye Fitting is a drain-waste-vent (DWV) branch fitting molded in durable PVC for residential and commercial waste and vent piping systems, offered across trade sizes from 1-1/2" through 4" to match a wide range of rough-in requirements. This double wye configuration features Hub x Hub x Hub x Hub connections at all four openings, allowing multiple branch lines to tie into a single run at a smooth, code-compliant angle that supports proper non-pressurized drainage flow. Manufactured by Spears, a trusted name in PVC piping products, this fitting is engineered for reliable, long-term performance across the full 1-1/2" to 4" size range used in DWV branch and vent stack applications.

Key Features

  • Size Range: Offered in 1-1/2", 2", 3", and 4" trade sizes to fit a wide range of DWV branch layouts.
  • Double Wye Configuration: Provides a double branch connection point for combining multiple drain or vent lines into a single run.
  • Connection Type: Hub x Hub x Hub x Hub connections for solvent-welded joints at all four openings.
  • Durable PVC Construction: Molded from PVC for corrosion resistance and long service life in drain-waste-vent piping systems.
  • Non-Pressurized DWV Design: Engineered specifically for gravity-fed drain and vent flow rather than pressurized piping systems.
  • Smooth Interior Flow Path: Wye branch geometry helps maintain consistent drainage flow and reduce the risk of blockage at branch connections.
  • Lightweight PVC Material: Easier to handle and install compared to metal alternatives, while maintaining the strength required for DWV use.

Technical Specifications

  • Product Material: PVC
  • Connection Type: Hub
  • Configuration: Double Wye, Hub x Hub x Hub x Hub
  • Available Sizes: 1-1/2" to 4"

Typical Applications

  • Residential and Commercial Drain-Waste-Vent (DWV) Systems
  • Branch Connections for Multiple Fixture Drain Lines
  • Vent Stack Branch Piping
  • New Construction Plumbing Rough-In
  • Plumbing System Repairs and Retrofits

Why Spears?

Spears PVC fittings are manufactured for consistent fit and dependable performance in demanding plumbing and DWV applications. The PVC construction of this double wye fitting delivers corrosion resistance and a smooth internal flow path across every size in the 1-1/2" to 4" range, helping installers achieve reliable, long-lasting drain-waste-vent connections. With Hub x Hub x Hub x Hub solvent-welded joints at all four openings, this fitting is built for the durability and consistency professional plumbing installations require, whether for new construction rough-in or system repair and retrofit work.

Product Specs

Product Type:
Wye Fitting
Department:
Plumbing
Product Group:
PVC & CPVC Fittings
Product Material:
PVC
Connection Type:
Hub
Configuration:
Double Wye
Product Size:
1-1/2" - 4"

Spears P611-015 – Frequently Asked Questions

1) What sizes does the Spears P611 PVC DWV double wye come in?
Four sizes: 1-1/2 inch (P611-015), 2 inch (P611-020), 3 inch (P611-030) and 4 inch (P611-040). All four are hub on every opening, so you size it to the run it is going into and solvent weld all four connections.
2) Is the Spears double wye a solvent-weld fitting or does it thread on?
Solvent weld. Every one of the four openings is a hub socket, so the pipe goes in with DWV primer and cement. There is no threaded or gasketed option on this fitting, and no rubber coupling built in.
3) When should I use a double wye instead of two separate single wyes?
A double wye takes two branch lines into the same run at one point, so you use it where two fixtures or two branch drains land back to back, like a pair of lavatories or opposing bathroom groups on the same stack. Two separate wyes need extra pipe between them and two more joints. The tradeoff is that the double wye commits both branches to the same elevation, so if the two fixtures drain at different heights, stagger single wyes instead.
4) Can a PVC double wye be installed horizontally for a horizontal branch drain?
A wye is used where the sweep angle keeps the flow moving, which is why it goes on horizontal-to-horizontal and vertical-to-horizontal branch connections rather than a sanitary tee. On a flat run the double wye branches are usually rolled up off the horizontal so the branch discharge does not backflow into the opposite branch. Local code governs the exact application, and a double wye is normally not permitted flat on its back for two horizontal fixture branches.
5) Does the Spears P611 come as a single fitting or in a case?
Packaging on the P611 double wye is 20 each per pack. That matters for a contractor buying for a rough-in or a supply house stocking the shelf, since it is a case-quantity item rather than a loose single.
6) Will a PVC double wye hold up in a commercial waste line?
Yes. The P611 is molded PVC, which resists corrosion from waste and vent conditions and carries no risk of rust or scale the way cast iron or galvanized does. It is used in both residential and commercial DWV work, including new construction rough-in and repair or retrofit on existing PVC systems.
7) Can I use this Spears fitting on a vent stack, not just a drain?
Yes. The double wye works on vent stack branch piping as well as fixture drain branches, since DWV fittings serve both sides of the system. Same solvent weld hub joints either way.
How fast can I get the Spears P611-015 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears P611-015 come with a warranty?
Absolutely. The Spears P611-015 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears P611-015?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Spears P611-015 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!