Spears PVC DWV Sanitary Tee, H...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.99
Spears PVC DWV Sanitary Tee, Hub x Hub x Hub Fitting

Spears PVC DWV Sanitary Tee, Hub x Hub x Hub Fitting

(No reviews yet) Write a Review

Model: P400-015

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Spears PVC DWV Sanitary Tee, Hub x Hub x Hub Fitting

The Spears PVC DWV Sanitary Tee, Hub x Hub x Hub Fitting is a drain-waste-vent (DWV) branch fitting built for code-compliant sanitary tee connections in residential and commercial plumbing systems. Molded from PVC for long-term corrosion and chemical resistance, this sanitary tee is available in trade sizes from 1-1/2" through 8", with all three openings configured as Hub x Hub x Hub for solvent-welded joints on every leg. Whether routing a branch line into a main stack or setting up a vent run, this tee gives plumbers and contractors a consistent, leak-resistant DWV fitting across the full size range.

Key Features

  • Trade Size Range: Available in 1-1/2", 2", 3", 4", 6", and 8" sizes to match a wide range of DWV branch and vent line diameters.
  • Sanitary Tee Design: Configured specifically for DWV branch connections, directing waste and vent flow through a smooth interior sweep that helps reduce the risk of clogs and backups.
  • Hub x Hub x Hub Connections: All three openings are hub-style across every size in the range, allowing solvent-welded joints to standard PVC DWV pipe for a consistent, leak-resistant assembly.
  • Durable PVC Construction: PVC material resists corrosion, rust, and chemical attack common in drain-waste-vent environments, supporting long-term performance versus metallic alternatives.
  • DWV-Specific Fitting: Purpose-built for drain, waste, and vent piping rather than pressure applications, ensuring the fitting is matched correctly to its intended use.
  • Lightweight, Easy-Install Material: PVC construction keeps the fitting lightweight for straightforward handling, cutting, and solvent welding on the job site, reducing installation time.
  • Consistent Fit and Alignment: The triple-hub layout keeps branch and vent runs aligned across every size, simplifying layout in tight wall cavities or below-slab installations.

Technical Specifications

  • Product Type: Tee
  • Product Material: PVC
  • Trade Size Range: 1-1/2" - 8"

Typical Applications

  • Drain-Waste-Vent (DWV) Piping Systems
  • Residential and Commercial Plumbing Installations
  • Branch Line Connections for Drain and Vent Runs
  • New Construction and Plumbing Renovation Projects
  • Sanitary Sewer Line Routing
  • Below-Slab and In-Wall DWV Rough-In Work

Why Spears?

Spears is a recognized manufacturer of PVC and CPVC piping products, and this Sanitary Tee line reflects that focus with solid PVC construction and a straightforward Hub x Hub x Hub connection design across the full 1-1/2" through 8" size range. For plumbing professionals building reliable, long-lasting DWV systems, a properly matched sanitary tee like this one supports clean installations, simplified solvent welding, and dependable performance over the life of the system.

Product Specs

Product Type:
Tee
Department:
Plumbing
Product Group:
PVC & CPVC Fittings
Product Material:
PVC
Configuration:
Hub x Hub x Hub
Product Subgroup:
Pipe Fittings
Product Size:
1-1/2" - 8"
Connection Type:
Hub

Spears P400-015 – Frequently Asked Questions

1) What sizes does the Spears P400 PVC DWV sanitary tee come in?
The Spears P400 sanitary tee is offered in six sizes, all Hub x Hub x Hub: 1-1/2 inch (P400-015), 2 inch (P400-020), 3 inch (P400-030), 4 inch (P400-040), 6 inch (P400-060) and 8 inch (P400-080). The 1-1/2 and 2 inch are the common lav, sink and vent sizes; 3 and 4 inch cover closet and main stack branches, and 6 and 8 inch handle commercial mains.
2) Do I need threaded adapters, or does this tee glue directly to PVC pipe?
All three openings are hubs, so each leg solvent welds directly over standard PVC DWV pipe. No threads, no gaskets, no adapters. Cut and deburr the pipe, primer and cement each socket, and you are done. If you need a threaded branch for a cleanout or a trap arm, you would use a separate hub x FIPT adapter at that leg.
3) What is the difference between a sanitary tee and a wye for a DWV branch?
A sanitary tee has a short-sweep branch that enters the run at roughly a right angle with a curve at the throat, which makes it the fitting for a horizontal branch tying into a vertical stack, or for a vent takeoff. A wye sweeps at a shallower angle and is what you use where the flow changes direction horizontally, such as a horizontal-to-horizontal connection. The Spears P400 is the sanitary tee; do not lay it flat on its back in a horizontal drain run.
4) Will a PVC sanitary tee hold up in an underslab or in-wall drain line?
PVC is the standard material for buried and concealed DWV work because it does not rust or corrode the way cast iron and galvanized do, and it shrugs off the chemistry that goes down a drain. The P400 is molded PVC and is called out for below-slab and in-wall rough-in as well as sanitary sewer routing. It is also light enough to handle overhead or in a trench without a second set of hands on the smaller sizes.
5) Can I use a 3 inch Spears sanitary tee for a toilet branch off a stack?
Yes, that is exactly what the 3 inch P400-030 is for. A water closet branch is normally 3 inch, and a sanitary tee is the correct fitting where that horizontal branch enters a vertical stack. If the stack is 4 inch and the branch is 3 inch, you want a reducing pattern rather than this straight 3 x 3 x 3 configuration, since all three hubs on the P400 are the same nominal size.
6) Is the Spears P400 sanitary tee compatible with other brands of PVC DWV pipe and fittings?
The hubs accept standard PVC DWV pipe, so as long as the pipe is the matching nominal size in PVC DWV, brand does not matter for the joint. What does matter is the cement: use a solvent cement rated for PVC and for the pipe diameter you are working with. Do not try to glue this to ABS pipe with PVC cement, and do not mate it to CPVC.
How fast can I get the Spears P400-015 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears P400-015 come with a warranty?
Absolutely. The Spears P400-015 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears P400-015?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Spears P400-015 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!