You may also like
SPLTBLT-MAIN:4-6CUALACSR-1BG
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Split-Bolt Connector
- Replacement Product Id New :
- 7TAH006110R0004
- Selling Unit Of Measure:
- each
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 2HPS-B1-5 – Frequently Asked Questions
1) What conductor sizes does the Blackburn 2HPS-B1-5 split-bolt connector take on the main run?
The 2HPS-B1-5 is rated for a 4 to 6 AWG main run. That range covers the run conductor the bolt closes over, so size your main first and then confirm the tap falls within the same jaw opening.
2) Can I use the Blackburn 2HPS-B1-5 split bolt on aluminum or ACSR conductors, or copper only?
It is a CU/AL/ACSR rated connector, so copper, aluminum, and ACSR conductors are all acceptable within the 4 to 6 AWG main range. The connector body itself is copper.
3) Is a split-bolt connector the right choice for splicing two conductors, or should I use a compression connector?
A split bolt like the 2HPS-B1-5 is a mechanical connector: you lay the run and tap conductors into the bolt, tighten the nut, and tape or insulate the joint. That makes it the practical pick for field taps and splices where you do not want to bring a hydraulic crimper. Compression lugs and sleeves are the better answer where the joint must be permanent, submersible, or inspected as an irreversible connection. For a 4 to 6 AWG copper, aluminum, or ACSR tap, the split bolt does the job with hand tools.
4) Does the Blackburn 2HPS-B1-5 come insulated, or do I need to cover the splice?
It is a bare mechanical split bolt, copper bodied, with no factory insulation. Plan on taping the completed connection or fitting an insulating cover sized to the split bolt, and allow for the extra bulk of that cover when you decide how much room the splice needs in a box or enclosure.
5) Has the Blackburn 2HPS-B1-5 been superseded by another part number?
Blackburn lists 7TAH006110R0004 as the replacement product ID for the 2HPS-B1-5. If you are matching a spec sheet or an older BOM that calls out 2HPS-B1-5, that newer number is the same item under current numbering.
6) Is the Blackburn 2HPS-B1-5 sold individually or in a bag?
It is sold each, so quantity one gets you one split bolt. Count your taps and order accordingly rather than assuming a multi-pack.
How fast can I get the Blackburn 2HPS-B1-5 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 2HPS-B1-5 come with a warranty?
Absolutely. The Blackburn 2HPS-B1-5 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 2HPS-B1-5?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 2HPS-B1-5 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.