Intermatic FD15MC Decorator Sp...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$120.40
$61.61
Intermatic FD15MC Spring Wound Countdown Timer, Decorator Style, 125-277 VAC, 50/60 Hz, SPST, 15 Minute Max, Without Hold, Ivory

Intermatic FD15MC Decorator Spring Wound Countdown Timer 125-277V 15-Minute SPST Wall Switch

(No reviews yet) Write a Review

Model: FD15MC
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$120.40
$61.61
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Intermatic FD15MC Decorator Spring Wound Countdown Timer 125-277V 15-Minute SPST Wall Switch

Professional spring-wound timing control for energy-efficient load management

The Intermatic FD15MC delivers reliable countdown timing control with decorator styling that replaces any standard or decorator wall switch. This spring-wound timer operates without electricity, providing 15-minute maximum timing cycles with SPST switching for 125-277 VAC applications at 50/60 Hz. The ivory finish and decorator profile integrate seamlessly into residential and commercial installations while automatically limiting ON time for energy-consuming loads.

Professional Features & Benefits

  • Spring-Wound Operation: No electricity required to operate, ensuring reliable timing control even during power fluctuations or outages.
  • 125-277 VAC Compatibility: Wide voltage range supports both residential and commercial applications with 50/60 Hz operation.
  • 15-Minute Maximum Timer: Automatically breaks circuit at end of timing cycle to prevent energy waste and extend equipment life.
  • SPST Configuration: Single-pole single-throw switching provides simple, reliable load control for various applications.
  • No Neutral Required: Simplified wiring installation without neutral connection reduces installation complexity.
  • Universal Load Compatibility: Works with incandescent, fluorescent, CFL, and LED lighting plus motor loads.
  • Teeter-Type Terminals: Time-saving front terminal connections enable quick and easy installation.

Technical Specifications

  • Applications: Air Movement & Ventilation;Indoor Lighting Control;Outdoor Lighting Control;Motor Control
  • Country Of Origin: Tunisia
  • Depth: 1.25 in
  • Input Voltage Rating Range S : 125-277 VAC, 50/60 Hz
  • Marketing Description: The FD Series Decorator Countdown Timers are designed to replace any standard or decorator style wa
  • Product Color: Ivory
  • Product Height: 4.125 in
  • Product Length: NA NA
  • Product Weight: NA lbs
  • Product Width: 1.75 in
  • Warranty Period: 1-Year limited

Professional Applications

  • Residential bathroom ventilation fan control
  • Commercial lighting energy management
  • Outdoor security and landscape lighting
  • Motor-driven equipment timing control
  • Multi-unit property common area lighting
  • Professional office energy conservation
  • Retail establishment load management

Why Choose Intermatic Quality?

Intermatic delivers proven reliability with this 1-year limited warranty countdown timer featuring robust spring-wound mechanism and decorator styling. The wide 125-277 VAC compatibility and ivory finish ensure professional performance across diverse residential and commercial applications while the no-neutral-required design simplifies installation requirements.

Manufacturer Resources

Product Specs

Application:
Air Movement & Ventilation;Indoor Lighting Control;Outdoor Lighting Control;Motor Control
Country Of Origin:
Tunisia
Input Voltage Rating Range S :
125-277 VAC, 50/60 Hz
Marketing Description:
The FD Series Decorator Countdown Timers are designed to replace any standard or decorator style wa
Product Color:
Ivory
Product Height:
4.125 in
Product Length:
NA NA
Product Weight:
NA lbs
Product Width:
1.75 in
Warranty Period:
1-Year limited
Product Depth:
1.25 in

Intermatic FD15MC – Frequently Asked Questions

1) Will the Intermatic FD15MC spring wound timer work on a 277V commercial lighting circuit?
Yes. The FD15MC is rated 125-277 VAC at 50/60 Hz, so it covers both 120V residential circuits and 277V commercial lighting branch circuits with the same device. That wide range is why it gets specified across mixed portfolios instead of stocking separate 120V and 277V timers.
2) Do I need a neutral in the box to install this bathroom fan timer?
No neutral is required. The FD15MC is a spring wound mechanical timer, so it draws no power to run and wires like an ordinary single-pole switch. That matters in older boxes and switch legs where only the hot and the load are present, which is where electronic timers fail.
3) Can I replace an existing decorator rocker switch with this Intermatic countdown timer?
That is what the FD Series decorator countdown timers are built for. The FD15MC replaces any standard or decorator style wall switch in a single gang opening, and it uses front teeter-type terminals so you are not fishing screws on the sides of the yoke. The body measures 4.125 inches high, 1.75 inches wide, and 1.25 inches deep, so confirm you have that much depth behind the plaster ring.
4) Is a 15-minute timer long enough for a bathroom exhaust fan?
The FD15MC tops out at 15 minutes, which suits a quick-clear bath fan, a closet light, or a utility room. If you need a fan to run 30 or 60 minutes after someone leaves, this is the wrong dial length and you want a longer spring wound model in the FD Series instead. The dial only counts down to off, so there is no hold-on position to leave the load running indefinitely.
5) Will this timer switch LED and fluorescent fixtures, or only incandescent?
It handles incandescent, fluorescent, CFL, and LED lighting plus motor loads. Because the mechanism is a mechanical SPST contact rather than a solid state switch, there is no minimum load or flicker problem the way there is with electronic timers on low-wattage LED drivers.
6) Can I use the FD15MC to time an exhaust fan motor, not just lights?
Yes, motor control is one of its listed applications, along with air movement and ventilation, indoor lighting control, and outdoor lighting control. Common uses are bath and utility exhaust fans, landscape and security lighting, and motor-driven equipment you do not want left running.
7) Does this timer work as a 3-way switch or control a fan from two locations?
No. The FD15MC is SPST, single pole single throw, so it controls one load from one location only. For a fan or light switched from two points you need a different arrangement, such as a 3-way switch feeding the timer, with the timer wired as the single pole device on the load side.
8) Will a spring wound timer keep working after a power outage?
Yes, and that is the practical reason to pick one. The FD15MC needs no electricity to operate, so the mechanism keeps counting and the circuit still opens at the end of the cycle. Electronic timers with volatile settings can lose their state on a power interruption.
9) What color is the Intermatic FD15MC and will it match my existing devices?
Ivory, in a decorator profile, so it lines up with ivory decorator rockers and takes a standard decorator wall plate. If your building is standardized on white or light almond devices, it will not match, and the plate opening being the same does not help the color.
10) Does the wall plate come with the FD15MC timer?
The FD15MC is the timer device itself. It takes a standard decorator style wall plate, which you order to suit the gang count and the finish on the rest of the opening, so add plates to the order if you are replacing a toggle switch that used a toggle-cut plate.
How fast can I get the Intermatic FD15MC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Intermatic FD15MC come with a warranty?
Absolutely. The Intermatic FD15MC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Intermatic FD15MC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Intermatic FD15MC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!