Square D LC1D-95BD TeSys Deca ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$880.17
Square D LC1D-95BD TeSys Deca IEC Contactor, 95A, 3-Pole

Square D LC1D-95BD TeSys Deca IEC Contactor, 95A, 3-Pole

(No reviews yet) Write a Review

Model: LC1D95G7

In Stock (leaves warehouse same day if ordered before 3pm ET)

$880.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Square D LC1D-95BD TeSys Deca IEC Contactor, 95A, 3-Pole

The Square D TeSys Deca LC1D95 Series is a nonreversing IEC contactor engineered for motor starter and control-panel applications. Rated 95A with a maximum motor rating of 60HP at 480VAC, 3-phase, this open-style contactor features a 3-pole, 3 NO contact composition and is available with a 24VDC or 120VAC 50/60Hz control circuit coil to match your control voltage requirements. Built to CSA C22.2 No 14, UL 60947-4-1, EN 60947-5-1, and IEC 60947-4-1 standards, the LC1D95 delivers dependable, code-compliant switching for demanding industrial and commercial motor control systems.

Key Features

  • Rated Operational Current: 95A (Ie) at <440V AC-3 for the power circuit, supporting motor loads up to 60HP at 480VAC, 3-phase.
  • Pole Configuration: 3-pole, 3 NO contact composition in an open-style, nonreversing design for plate or rail mounting.
  • Coil Voltage Options: Available with a 24VDC coil or a 120VAC 50/60Hz coil (Uc), each with screw clamp control-circuit terminals tightened to 1.2 N.m — select the coil voltage that matches your control circuit.
  • Rated Insulation Voltage: Ui 1000V per IEC 60947-4-1 and 600V per UL/CSA for the power circuit, with an 8kV rated impulse withstand voltage (Uimp).
  • Rated Breaking Capacity: 1100A at 440V for the power circuit, conforming to IEC 60947.
  • Degree of Protection: IP20 on the front face per IEC 60529.
  • Electrical Durability: 1.2 Mcycles at 95A AC-3 and 1.3 Mcycles at 125A AC-1.
  • Mounting Support: Plate or rail mounting for flexible control-panel installation.

Certifications & Compliance

  • UL Listed (UL 60947-4-1)
  • CSA Certified (CSA C22.2 No 14)
  • CE Marked (EN 60947-4-1, EN 60947-5-1)
  • UKCA
  • CCC
  • CB Scheme
  • EAC
  • Marine Certification
  • RoHS Exemption Information: Yes

Technical Specifications

  • Configuration: 3 Pole, 3 NO
  • Amperage Rating: 95A
  • Listing: UL
  • Toxic Heavy Metal Free: Yes
  • Warranty Period: 18 months
  • Sustainable Packaging: Yes
  • Mercury Free: Yes
  • ROHS Eur Full Compliance Status: Compliant

Typical Applications

  • Motor Starter Circuits for Industrial Equipment
  • Commercial and Industrial Motor Control Panels
  • Panel Builder and OEM Control Panel Assemblies
  • Rail- or Plate-Mounted Control Enclosures
  • Resistive and Motor Load Switching Applications

Why Square D?

Square D TeSys Deca contactors like the LC1D95 combine open-style, nonreversing construction with UL 60947-4-1 and CSA C22.2 No 14 listings for reliable, code-compliant motor control, and the choice of 24VDC or 120VAC coil voltage lets you match the contactor to your control circuit without compromising on performance. Backed by an 18-month warranty and Green Premium environmental disclosure, the LC1D95 is built for consistent performance in demanding industrial and commercial control panels.

Manufacturer Resources

Product Specs

Product Type:
Contactor
Series:
TeSys Deca LC1D95
Configuration:
3 Pole, 3 NO
Voltage Rating:
480VAC
Amperage Rating:
95A
Listing:
UL
Standards:
IEC 60947-4-1
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Contactors & Relays

Square D LC1D95G7 – Frequently Asked Questions

1) What coil voltages does the Square D LC1D95 contactor come in?
Two coil options: 120VAC 50/60Hz, ordered as LC1D95G7, and 24VDC, ordered as LC1D95BD. The coil is the only difference between them, so pick the one that matches your control circuit. Control terminals are screw clamp, torqued to 1.2 N.m.
2) What size motor will a Square D LC1D95 contactor run?
The LC1D95 is rated 95A operational current (Ie) at up to 440V in AC-3 duty, which covers motors to 60HP at 480VAC three phase. Power circuit voltage rating is 480VAC. If your motor draws more than 95A full load, step up to a larger frame.
3) Is the Square D LC1D95 contactor UL listed for use in a US control panel?
Yes. It is UL Listed to UL 60947-4-1 and CSA certified to CSA C22.2 No 14, with a 600V insulation rating under UL/CSA (1000V Ui per IEC). It also carries CE, UKCA, CCC, CB Scheme, EAC and marine certification.
4) Can the LC1D95 be used to reverse a motor?
No. It is a nonreversing contactor with a 3-pole, 3 NO power contact arrangement. Reversing needs two contactors mechanically and electrically interlocked, so you would order a pair plus an interlock kit rather than a single LC1D95.
5) Does the LC1D95 mount on DIN rail or does it need a panel plate?
Either. The LC1D95 supports plate or rail mounting, so it drops onto DIN rail in a control enclosure or bolts to a back plate in a panel build. It is open style, IP20 on the front face, so it must go inside an enclosure.
6) Does the LC1D95 come with an auxiliary contact block?
The LC1D95 ships with a 3-pole, 3 NO power pole arrangement only, no auxiliary contact included. If you need an aux contact for a seal-in circuit or a run indicator, add a TeSys D auxiliary contact block. By contrast, the ABB AF16 3-pole contactor is specified with a 1NO auxiliary contact built in.
7) Is an ABB AF series contactor a substitute for a Square D LC1D95?
Not at this size. The ABB unit we carry in that family is the AF16, a 3-pole contactor with 100-250VAC/DC control, which is a far smaller frame than a 95A 60HP device. If you are replacing an LC1D95, stay with a 95A class IEC contactor; the AF16 suits small motor and control loads.
8) What is the difference in coil control between the Square D LC1D95 and the ABB AF16?
The LC1D95 is ordered by discrete coil voltage - a 120VAC 50/60Hz coil version (LC1D95G7) or a 24VDC coil version (LC1D95BD), so the control voltage is fixed at the part number. The ABB AF16 is specified with a 100-250VAC/DC control coil, a wide-band electronic coil that accepts either AC or DC across that range on one part number. If your panel's control voltage varies or you want one stocked coil across AC and DC schemes, that is the AF behavior; if your panel is a straight 120VAC or 24VDC control circuit, the LC1D95 coil variants match it directly.
9) I need an auxiliary contact for interlocking - does the Square D LC1D95 include one like the ABB AF16 does?
The LC1D95 is described by its power pole composition: 3 poles, 3 NO, with screw clamp control circuit terminals. The ABB AF16 is supplied with a 1NO auxiliary contact as part of that part number. If your schematic calls for a built-in auxiliary for seal-in or interlocking, that is a difference worth confirming before you build the panel - the LC1D95 is a TeSys Deca frame that takes add-on auxiliary blocks, while the AF16 arrives with the 1NO already on it.
10) How long will an LC1D95 last switching a motor load?
Electrical durability is 1.2 million cycles at 95A in AC-3 motor duty and 1.3 million cycles at 125A in AC-1 resistive duty. Rated breaking capacity is 1100A at 440V, and rated impulse withstand is 8kV.
11) Which standards does the TeSys Deca LC1D95 contactor conform to?
IEC 60947-4-1 is the governing contactor standard, along with UL 60947-4-1, CSA C22.2 No 14, and EN 60947-4-1 / EN 60947-5-1 for the control circuit. That covers most industrial and commercial motor control specs calling for an IEC rated contactor.
How fast can I get the Square D LC1D95G7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Square D LC1D95G7 come with a warranty?
Absolutely. The Square D LC1D95G7 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Square D LC1D95G7?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Square D LC1D95G7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!