Stanley 33-725Y FATMAX Classic...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$31.60
Stanley 33-725Y FATMAX Classic 25 ft. x 1-1/4 in. Tape Measure

Stanley 33-725Y FATMAX Classic 25 ft. x 1-1/4 in. Tape Measure

(No reviews yet) Write a Review

Model: 33-725Y

In Stock (leaves warehouse same day if ordered before 3pm ET)

$31.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Stanley 33-725Y FATMAX Classic 25 ft. x 1-1/4 in. Tape Measure

The Stanley 33-725Y FATMAX Classic 25 ft. x 1-1/4 in. Tape Measure is built for everyday layout and measuring on the jobsite. The wide 1-1/4 in. blade is Mylar coated for durability, and BladeArmor protects the first 3 in. of the blade at the hook, where tapes see the most wear. Stud markings at 16 in. and 19.2 in. speed up framing layout, and the high-impact case with cushion grip is made to handle daily use and drops. The wide blade is a good fit for framing and layout work where you need a stiff tape that is easy to read at a glance. The stud markings at 16 in. and 19.2 in. help speed up layout for walls, floors and ceiling framing on every job.

Key Features

  • BladeArmor Protection: BladeArmor coating on the first 3 in. of the blade.
  • Mylar-Coated Blade: Coated blade for durability.
  • Stud Markings: 16 in. and 19.2 in. stud markings for framing layout.
  • High-Impact Case: Case with cushion grip for jobsite use.
  • Wide Blade: 1-1/4 in. blade width.

Technical Specifications

  • Brand: Stanley
  • Model: 33-725Y
  • UPC: 076174337259
  • Product Type: Tape Measure
  • Length: 25 ft.
  • Blade Width: 1-1/4 in.
  • Blade: Mylar coated, BladeArmor on first 3 in.
  • Stud Markings: 16 in. and 19.2 in.
  • Case: High-impact with cushion grip

Typical Applications

  • Framing layout
  • Drywall and finish measurements
  • Electrical rough-in
  • Cabinet and fixture installation
  • General construction and remodeling

Why Stanley?

Stanley's FATMAX Classic tape measures are built for tradespeople who measure all day. The 33-725Y combines a 25 ft. x 1-1/4 in. Mylar-coated blade, BladeArmor protection at the hook and a high-impact case, making it a dependable everyday tape for carpenters, electricians and contractors. It is a solid everyday choice for crews that want a 25 ft. tape with a wide blade and protection where tapes wear out first.

Manufacturer Resources

Product Specs

list_batch:
STA-20260923
Product Type:
Tape Measure
Department:
Electrical
Product Subgroup:
Measuring Tools
Product Group:
Hand Tools

Stanley 33-725Y – Frequently Asked Questions

1) Does the Stanley FATMAX 33-725Y have 19.2 inch marks for engineered truss and joist layout?
Yes. The 33-725Y blade carries both 16 in. and 19.2 in. stud markings, so you can lay out standard 16 in. on center walls and 19.2 in. on center joist or truss spacing without doing the math each time. That covers wall, floor and ceiling framing layout.
2) Is a 25 ft tape long enough, or should I step up for framing work?
At 25 ft. with a 1-1/4 in. wide blade, the 33-725Y is sized for the everyday work most crews do: framing layout, drywall and finish measuring, electrical rough-in, and cabinet or fixture installs. The wide blade is what gives you reach on unsupported standout and makes the numbers easy to read from a distance. If you routinely measure building lengths or long runs in one pull, you want a longer tape than 25 ft.
3) What is BladeArmor on the Stanley FATMAX tape and does it actually help?
BladeArmor is a coating on the first 3 in. of the blade, right at the hook end. That is where a tape fails first, because the first few inches take every drag across concrete and every retraction slam. The rest of the blade is Mylar coated for wear resistance. It is a durability feature, not a measuring feature, so graduations read the same as any other FATMAX blade.
4) What is the correct Stanley part number to reorder this 25 ft FATMAX tape for a crew?
Order Stanley model 33-725Y. That is the 25 ft. x 1-1/4 in. FATMAX Classic tape measure, and it is a single configuration, so there are no length or case options to specify when you standardize a crew or a tool crib on it.
How fast can I get the Stanley 33-725Y delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Stanley 33-725Y come with a warranty?
Absolutely. The Stanley 33-725Y is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Stanley 33-725Y?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Stanley 33-725Y from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!