Stanley 46-222 12 in. Handyman...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12.35
Stanley 46-222 12 in. Handyman Combination Square

Stanley 46-222 12 in. Handyman Combination Square

(No reviews yet) Write a Review

Model: 46-222

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12.35
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Stanley 46-222 12 in. Handyman Combination Square

The Stanley 46-222 12 in. Handyman Combination Square is a versatile layout tool for marking square and 45 degree lines, checking depths and scribing. The 12 in. blade is hard-chrome embossed for rust resistance and legible markings, and it slides through a die-cast metal handle that can be locked at any point along the blade. A vial in the handle lets you check level and plumb, and a built-in scriber is stored in the handle for marking. It carries a 1 year warranty. It can be used as a try square, miter square, depth gauge and marking gauge, which makes it one of the more versatile tools in a layout kit. The die-cast handle locks at any point on the blade, so the square can be set once and used to mark repeated lines at the same depth or offset.

Key Features

  • Hard-Chrome Blade: Embossed, rust-resistant 12 in. blade.
  • Die-Cast Metal Handle: Sturdy handle slides along the blade.
  • Built-In Scriber: Scriber stored in the handle.
  • Vial: Check level and plumb.
  • 1 Year Warranty: Backed by a 1 year warranty.

Technical Specifications

  • Brand: Stanley
  • Model: 46-222
  • UPC: 076174462227
  • Product Type: Combination Square
  • Blade Length: 12 in.
  • Blade: Hard-chrome embossed, rust resistant
  • Handle: Die-cast metal
  • Accessories: Vial, built-in scriber
  • Warranty: 1 year

Typical Applications

  • Marking square and 45 degree cuts
  • Checking depth and setting tool heights
  • Layout for cabinets and trim
  • Metal and woodworking layout
  • General carpentry
  • Scribing lines on wood and metal
  • Setting blade and bit depths

Why Stanley?

Stanley's 46-222 combines a rust-resistant hard-chrome blade, die-cast metal handle, vial and scriber in one 12 in. square. It is a practical layout tool for carpenters, installers and DIY users. Use it for everyday layout tasks such as marking square cuts on lumber, checking depths and scribing lines on wood and metal.

Manufacturer Resources

Product Specs

list_batch:
STA-20260923
Department:
Electrical
Product Subgroup:
Measuring Tools
Product Type:
Square
Product Group:
Hand Tools

Stanley 46-222 – Frequently Asked Questions

1) Can I lock the square at a set depth to mark the same line repeatedly?
Yes. The die-cast handle slides along the blade and locks at any point on it, so you can set an offset once and scribe the same reveal or depth down a run of studs or cabinet parts without re-measuring. That is also how it gets used to set saw blade and router bit depths.
2) Will the Stanley 46-222 blade rust if it lives in a damp job box or a van?
The blade is hard-chrome plated, which is what gives it its rust resistance, and the graduations are embossed rather than printed so they stay readable as the surface wears. The handle is die-cast metal. It still pays to wipe it down after wet work, but chrome plating is the reason this square holds up in a truck-bed tool bag better than a bare steel one.
3) Does the Stanley 46-222 come with a scriber, or do I need to buy one?
A scriber is built in and stores in the handle, so there is nothing extra to order to mark lines on wood or metal. The handle also carries a vial for checking level and plumb.
4) Is a combination square accurate enough to use as a level on a small install?
The vial in the 46-222 handle is there for quick level and plumb checks, which is useful when you are already holding the square to lay out a bracket, outlet box or shelf standard. For setting a long run or a cabinet bank, use a proper spirit or box level; the vial on a 12 inch square is a spot check, not a substitute.
5) What is the Stanley part number to order this 12 inch combination square?
Order it as Stanley model 46-222. That is the manufacturer part number for the 12 inch Handyman combination square with the hard-chrome blade, die-cast handle, vial and scriber.
6) Is this square usable for metal layout or is it a woodworking tool only?
Both. The 46-222 is listed for metal and woodworking layout, and the built-in scriber is intended for marking lines on wood and metal. Electrical and MRO crews use it the same way carpenters do, for squaring box and plate locations and checking depths.
How fast can I get the Stanley 46-222 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Stanley 46-222 come with a warranty?
Absolutely. The Stanley 46-222 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Stanley 46-222?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Stanley 46-222 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!