Stanley 20-045 FATMAX 15 in. 9...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$17.50
Stanley 20-045 FATMAX 15 in. 9 TPI Carbon Steel Handsaw

Stanley 20-045 FATMAX 15 in. 9 TPI Carbon Steel Handsaw

(No reviews yet) Write a Review

Model: 20-045

In Stock (leaves warehouse same day if ordered before 3pm ET)

$17.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Stanley 20-045 FATMAX 15 in. 9 TPI Carbon Steel Handsaw

The Stanley 20-045 FATMAX 15 in. 9 TPI Carbon Steel Handsaw is a compact saw for fast cuts in lumber and sheet goods. SharpTooth 3-face tooth geometry cuts on both the push and pull strokes, and induction-hardened teeth hold their edge longer. The thick handle gives a firm grip, and the back of the handle doubles as a 45 and 90 degree marking guide so you can lay out cuts without reaching for a square. The saw is backed by a Stanley limited lifetime warranty. The compact 15 in. length makes it easy to carry in a tool bag and use in tight spaces where a full-length saw would be awkward. The marking back on the handle lets you lay out a quick 45 or 90 degree line before you cut, which saves a trip to the square for simple crosscuts.

Key Features

  • SharpTooth Geometry: 3-face tooth geometry for fast cutting.
  • Induction-Hardened Teeth: Hardened teeth stay sharp longer.
  • 45/90 Degree Marking Back: Handle doubles as a marking guide.
  • Thick Handle: Firm, comfortable grip.
  • Limited Lifetime Warranty: Backed by a Stanley limited lifetime warranty.

Technical Specifications

  • Brand: Stanley
  • Model: 20-045
  • UPC: 076174200454
  • Product Type: Hand Saw
  • Blade Length: 15 in.
  • Tooth Count: 9 TPI
  • Blade Material: Carbon steel
  • Teeth: SharpTooth 3-face, induction hardened
  • Warranty: Limited lifetime

Typical Applications

  • Cutting framing lumber
  • Trimming boards and sheet goods
  • Cutting in tight spaces
  • Jobsite and remodeling cuts
  • General carpentry

Why Stanley?

Stanley's FATMAX 20-045 packs SharpTooth 3-face geometry and induction-hardened teeth into a 15 in. saw that fits in a tool bag. A thick handle with a built-in 45/90 degree marking back and a limited lifetime warranty make it a practical handsaw for carpenters and contractors. It is well suited to quick cuts on the job when a power saw is not set up or is not practical for the cut.

Manufacturer Resources

Product Specs

list_batch:
STA-20260923
Department:
Electrical
Product Subgroup:
Saws
Product Type:
Hand Saw
Product Group:
Hand Tools

Stanley 20-045 – Frequently Asked Questions

1) Will a 9 TPI handsaw like the Stanley 20-045 FATMAX cut framing lumber cleanly, or is it too coarse for trim work?
At 9 teeth per inch, the Stanley 20-045 sits in the general carpentry range: fast enough for framing lumber and quick crosscuts, but still controlled enough for trimming boards and sheet goods. The SharpTooth 3-face tooth geometry cuts on both the push and the pull stroke, so it clears material quickly. If you need glass-smooth finish cuts on fine molding, a higher tooth count saw is the better choice.
2) Is the 15 inch Stanley FATMAX handsaw long enough for general jobsite cutting, or should I get a full-length saw?
The 20-045 has a 15 inch blade, which is a compact length meant for tool-bag carry and cuts in tight spaces where a full-length saw would be awkward. For repetitive full-depth rips in wide stock, a longer saw gives you more stroke per pass. For quick crosscuts on the job when a power saw is not set up, the 15 inch length is the point of the tool.
3) Can the teeth on the Stanley 20-045 be resharpened when they dull?
The 20-045 uses induction-hardened teeth, which hold an edge far longer than untreated carbon steel but are too hard to file back with a standard saw file. Treat it as a replace-when-dull saw rather than one you maintain on a sharpening vise. The blade body itself is carbon steel.
4) Does the Stanley FATMAX 20-045 handle really work as a square for marking cuts?
The back of the handle is shaped as a 45 and 90 degree marking guide, so you can lay a quick crosscut or miter line on a board without pulling out a speed square. It is a layout aid for simple cuts, not a replacement for a framing square on long or critical layout work.
5) What size and part number do I order for the Stanley FATMAX SharpTooth handsaw?
It is sold as Stanley model 20-045 in a single size, a 15 inch blade at 9 TPI. There are no handing, finish, or length options to specify.
6) Will the Stanley 20-045 cut plywood and OSB sheet goods without tearing them up?
Yes, sheet goods are one of its stated uses. The 3-face SharpTooth geometry cuts on both strokes, which keeps the saw moving through plywood and OSB. Back the sheet up and score your line if the face veneer matters, since 9 TPI is a fairly aggressive tooth pitch for thin plies.
How fast can I get the Stanley 20-045 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Stanley 20-045 come with a warranty?
Absolutely. The Stanley 20-045 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Stanley 20-045?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Stanley 20-045 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!