BEST RD2060R Spring Hinge with...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$26.75
BEST RD2060R Spring Hinge with Removable Pin - Plain Bearing Radius Corner Standard Weight

BEST RD2060R Spring Hinge with Removable Pin - Plain Bearing Radius Corner Standard Weight

(No reviews yet) Write a Review

Model: BEST-RD2060R-652-3.5x3.5
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$26.75
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEST RD2060R Spring Hinge with Removable Pin - Plain Bearing Radius Corner Standard Weight

Professional Fire-Rated Spring Hinge Solution

The BEST RD2060R is a high-quality spring hinge engineered for commercial applications requiring reliable door closing performance. Available in steel or stainless steel construction with 5/8" radius corners, this standard weight spring hinge features a removable pin design for easy installation and maintenance. Meeting NFPA80 standards for 3-hour fire doors, it provides an excellent alternative to overhead mounted closers with adjustable closing power and internal ratchet mechanism.

Professional Features & Benefits

  • Fire Door Compliance: Meets NFPA80 standard for 3-hour fire doors, approved for labeled fire doors, stairwell doors, and commercial entrance applications.
  • Multiple Size Options: Available in 4 1/2" (114mm) size UL listed for doors up to 4' x 8' (1219 x 2438mm), 4" (102mm) for doors up to 3' x 7' (914 x 2134mm), and 3 1/2" (89mm) for doors up to 2' 8" x 7' (813 x 2134mm).
  • Adjustable Closing Power: Internal ratchet mechanism eliminates loose adjustment pins while allowing closing power adjustment up or down for optimal performance.
  • Removable Pin Design: Removable pin feature allows for easy installation, maintenance, and adjustments without complete hinge removal.
  • Durable Construction: Plain bearing design with steel or stainless steel options providing strength and corrosion resistance for demanding commercial environments.
  • Radius Corner Profile: 5/8" radius corners provide a sleek, seamless appearance when installed on doors or gates.
  • LifeSpan Limited Warranty: Limited lifetime warranty for the life of the building provides long-term confidence and protection.
  • Cost-Effective Alternative: Excellent alternative to more expensive overhead mounted closers while maintaining professional performance standards.

Technical Specifications

  • Bearing Type: Plain Bearing
  • Commercial/Residential: Commercial
  • Corner Style: 5/8" Radius Corners
  • Department: Door Hardware
  • Duty Level: Medium Duty
  • Hinge Pin Type: Removable
  • Hinge Type: Spring
  • Product Category: Door Hinges and Pivots
  • Product Function: Plain Bearing
  • Product Group: Door Hinges and Pivots
  • Product Model: RD2060R
  • Product Subgroup: Spring Hinges
  • Product Type: Spring Hinges
  • Series: Spring Hinges
  • Subcategory: Hinges

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, weight capacity, and handing requirements for the specific door size.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and frame surfaces, ensuring proper alignment for smooth operation.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions for the selected hinge size.
  4. Install all mounting hardware and secure the hinge to door and frame per manufacturer torque specifications, ensuring the removable pin is properly seated.
  5. Adjust closing power using the internal ratchet mechanism to achieve desired door closing speed and force for the application.
  6. Test hinge operation to verify proper function, smooth door movement, and consistent closing performance. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Labeled Fire Doors and Stairwell Access
  • Hotel and Motel Guest Room Doors
  • Apartment Unit Entrance Doors
  • Commercial Office Building Interior Doors
  • Educational Facility Classroom and Common Area Doors
  • Healthcare Institution Patient Room and Service Doors
  • Multi-Tenant Residential Properties

Why Choose BEST Quality?

BEST spring hinges deliver professional-grade reliability with steel or stainless steel construction and internal ratchet mechanisms engineered for demanding commercial applications. The LifeSpan Limited lifetime warranty for the life of the building provides exceptional long-term value and confidence. Engineered to meet NFPA80 fire door standards where dependable closing performance and code compliance are essential.

Product Specs

Subcategory:
Hinges
Series:
Spring Hinges
Bearing Type:
Plain Bearing
Hinge Type:
Spring
Corner Style:
5/8" Radius Corners
Duty Level:
Medium Duty
Product Group:
Door Hinges and Pivots
Product Subgroup:
Spring Hinges
Product Type:
Spring Hinges
Commercial/Residential:
Commercial
Hinge Pin Type:
Removable
Product Model:
RD2060R
Product Function:
Plain Bearing
Product Category:
Door Hinges and Pivots
Department:
Door Hardware

BEST BEST-RD2060R-652-3.5x3.5 – Frequently Asked Questions

1) Can I use BEST RD2060R spring hinges on a labeled 3-hour fire door?
Yes. The RD2060R meets NFPA 80 for 3-hour fire doors and is approved for labeled fire doors, stairwell doors, and commercial entrances. Size still governs: match the hinge size to the leaf, since the 4-1/2 inch is the one UL listed up to 4' x 8'. On a labeled opening every hinge in the set has to be a listed hinge, so plan the full set, not one spring hinge plus two plain butts.
2) My door frame has rounded hinge pockets. Which spring hinge matches a 5/8 inch radius corner prep?
The RD2060R is cut with 5/8 inch radius corners, which is the larger of the two common radius preps (the other being 1/4 inch). If your existing hinge or frame pocket is 1/4 inch radius or square, this leaf will not seat correctly in the mortise. Orca Hardware also lists a 4" x 4" x 5/8" radius corner spring hinge, and Hager's 1252 is a standard weight steel spring hinge with 5/8 inch round corners if you need another brand on the same prep.
3) What else could I buy instead of the BEST RD2060R spring hinge?
Straight standard weight full mortise equivalents include the Hager 1250 in steel and the Hager 1150 in stainless steel, both medium duty. Hager's 1251 has 1/4 inch round corners and the 1252 has 5/8 inch round corners, so pick by the prep you have. McKinney's 1502 is the square corner standard weight version in 4-1/2" x 4-1/2". If the door is a residential 3-1/2 inch prep, Deltana's DSH35R4 single action spring hinge is 3-1/2" x 3-1/2" with a 1/4 inch radius. What is not a substitute: the SOSS 216IC and 220IC invisible spring closer hinges are concealed hinges with a 20 minute fire rating, so they neither drop into a butt hinge mortise nor cover a 3-hour labeled door.
4) What is the closest equivalent to a BEST RD2060R spring hinge in a 5/8 inch radius corner?
The Hager 1252 full mortise spring hinge is built with 5/8 inch round corners in standard weight steel, matching the 5/8 inch radius corner profile and standard weight class of the BEST RD2060R. Both are medium duty full mortise spring hinges. If the frame prep is cut for a 5/8 inch radius, either corner profile drops into the same mortise without refiling the corners.
5) My frame is prepped for square corner hinges, not radius. What spring hinge should I use instead of the RD2060R?
The RD2060R is made with 5/8 inch radius corners, so it will leave a gap in a square corner mortise. For square corner prep, the McKinney 1502 is a square corner full mortise standard weight spring hinge in 4-1/2 by 4-1/2, and the Orca Hardware 4040 Series is a 4 by 4 square corner spring hinge. Both are medium duty like the RD2060R. Match the leaf size to the existing mortise before ordering.
6) Can I use a SOSS invisible spring closer hinge in place of the BEST RD2060R?
They are not interchangeable preps. The RD2060R is a full mortise butt hinge with visible leaves and a removable pin. The SOSS 216IC, 218IC and 220IC are invisible spring closer hinges that mortise fully into the door edge and frame and leave no exposed leaf, and all three are heavy duty rather than medium duty. The SOSS 220IC also calls for a 2 inch minimum door thickness and the 218IC a 1-3/4 inch minimum. Swapping either way means new door and frame machining, not a leaf-for-leaf change.
7) I need a spring hinge for a toilet partition door. Is the RD2060R the right part?
The RD2060R is a commercial butt hinge sized in 3-1/2 by 3-1/2 through 4-1/2 by 4-1/2 leaves. For toilet partition doors, Pemko builds spring loaded continuous hinges for that specific application: the Markar FM400 and FM900 Series full mortise types and the FS402 and FS902 Series, each rated to an 80 lb load capacity, with the FS902 in 304 stainless steel. A continuous hinge distributes the load along the full door edge rather than at three or four butt locations.
8) Do I need a double action hinge instead of the RD2060R for a door that swings both ways?
Yes. The RD2060R is a single-swing full mortise spring hinge. For a door that has to swing in both directions, Deltana lists the DASH95 double action spring hinge with solid brass cover plates and the DASHS double action saloon hinge in 4 inch, 5 inch and 6 inch heights. Deltana's DSH35R4 is the single action type, so check the action before ordering from that family.
9) Which spring hinges are UL listed alternatives to the BEST RD2060R?
The Design Hardware UL Spring Hinge is a medium duty spring hinge carrying a UL listing, and the Emtek 95013 pair is UL listed in a 3-1/2 by 3-1/2 plated steel square corner form. The BEST RD2060R is UL listed at its 4-1/2 inch size for doors up to 4 feet by 8 feet, at 4 inch for doors up to 3 feet by 7 feet, and at 3-1/2 inch for doors up to 2 feet 8 inches by 7 feet, and meets NFPA80 for 3-hour fire doors. Confirm the size band against the door leaf you are hanging.
10) What sizes and finishes does the BEST RD2060R spring hinge come in?
Four sizes, 3-1/2" x 3-1/2", 4" x 4", 4-1/2" x 4", and 4-1/2" x 4-1/2", and every one of them is offered in all nine finishes: 600 primed for painting, 629 bright stainless, 630 satin stainless, 632 bright brass, 633 satin brass, 640 dark satin bronze, 641 oxidized bronze, 651 bright chrome, and 652 satin chrome. Two of those matter for spec: 630 satin stainless is the usual commercial default that matches most lever and exit hardware, and 600 lets you paint the hinge to the door.
11) How many spring hinges do I need per door, and can I mix them with regular hinges?
BEST rates the RD2060R by door size per hinge size, so the count follows the leaf: the standard commercial practice is two spring hinges plus a plain bearing butt on a 7 foot door, three spring hinges on a heavier or taller leaf. On a labeled fire door, all hinges in the set must be listed for that opening. The RD2060R is a plain bearing, medium duty hinge, so for high traffic openings with heavy leaves you would step up in size rather than mix in a lighter hinge.
12) Spring hinge or an overhead door closer for apartment and hotel unit doors?
Spring hinges like the RD2060R are the concealed, lower cost route: nothing mounts on the face of the door or the frame, which is why they get used on guest room and apartment entry doors where a surface closer looks wrong. What you give up is control, an overhead closer gives you sweep speed, latch speed, backcheck, and delayed action for accessibility. If the opening needs a controlled closing cycle or ADA-tuned opening force, a closer is the right call. If it just needs to close and latch reliably on a labeled or stairwell door, the spring hinge does it.
13) Do I have to order the RD2060R by hand, left or right?
No handing to specify. The RD2060R is ordered by size and finish only, four sizes across nine finishes, with no left or right variant. Single action spring hinges swing one way and the direction is set by which side of the door you mortise them into, so the same part works on a left hand and a right hand opening.
14) Is a stainless RD2060R spring hinge okay for an exterior or damp opening?
Stainless is the right pick there. The RD2060R comes in steel or stainless construction, and the 629 bright stainless and 630 satin stainless finishes are the corrosion resistant options for exterior doors, pool corridors, kitchens, and coastal work. The plated steel finishes (632 bright brass, 633 satin brass, 640 dark satin bronze, 651 bright chrome, 652 satin chrome) are plating over steel and belong on interior openings. 600 is primed bare for paint, so it needs a finish coat.
15) Is the RD2060R heavy enough for a high traffic entrance, or should I use a heavier hinge?
It is a standard weight, medium duty, plain bearing hinge. That suits guest room doors, apartment entries, classroom and office interiors, and stairwell doors. Plain bearing means no ball or anti-friction bearing between the knuckles, so for a heavy leaf on a busy exterior entrance that cycles constantly, a bearing hinge is the better wear choice. For heavier concealed applications, the SOSS 218IC and 220IC are heavy duty spring closer hinges, though those are invisible hinges needing a 1-3/4 inch and 2 inch minimum door thickness respectively, not a butt hinge prep.
16) What is the difference between the BEST RD2060R and the Hager 1150 spring hinge?
Both are standard weight, medium duty full mortise spring hinges. The Hager 1150 is specified as stainless steel construction, while the Hager 1250 is the steel construction version of the same standard weight full mortise pattern. The RD2060R covers both material routes through its finish selection, with 629 bright stainless steel and 630 satin stainless steel alongside plated steel finishes such as 652 satin chrome and 632 bright brass over steel.
17) Is there a 5/8 inch radius spring hinge that matches a Z hole pattern frame?
The Orca Hardware SPR4058 Series is a 4 by 4 with a 5/8 inch radius corner in a standard hole pattern, and the SPR4058Z is the same 4 by 4 by 5/8 inch radius corner hinge in a Z hole pattern. Both are medium duty. The BEST RD2060R also carries a 5/8 inch radius corner and is offered in a 4 by 4 leaf, so the corner profile lines up and the hole pattern is the deciding detail.
18) What is a simpler spring hinge option than the BEST RD2060R for a 3-1/2 inch residential-scale door?
For a 3-1/2 by 3-1/2 leaf, the Emtek 95013 is sold as a pair of UL listed plated steel spring hinges with square corners, and Deltana's DSH35R4 and DSH35R4-A are single action steel spring hinges at 3-1/2 by 3-1/2 with a 1/4 inch radius. The RD2060R is also built in a 3-1/2 by 3-1/2 size but with 5/8 inch radius corners, so the corner profile has to match the existing mortise in any of these directions.
19) What does the removable pin on the RD2060R actually let me do?
It lets you pull the door off the frame without unscrewing the hinge leaves, and it gives you access for adjustment and maintenance in place. On a spring hinge that matters more than on a plain butt, because you set the closing power with the internal ratchet after the door is hung and you may need to come back and retension it as the door settles or weatherstripping is added.
How fast can I get the BEST BEST-RD2060R-652-3.5x3.5 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEST BEST-RD2060R-652-3.5x3.5 come with a warranty?
Absolutely. The BEST BEST-RD2060R-652-3.5x3.5 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEST BEST-RD2060R-652-3.5x3.5?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEST BEST-RD2060R-652-3.5x3.5 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!