You may also like
4SQ SURF CVR, 1 GFI, 1/2 RSD
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States
- Selling Unit Of Measure:
- each
- Standards:
- UL E2969
- Surface Finishing:
- Pre-Galvanized
- Volume:
- 5 in³
- Department:
- Electrical
- Product Group:
- Boxes & Enclosures
- Product Subgroup:
- Box Covers
- Product Type2:
- Outlet Box Covers
- Product Size:
- 4 Inches
- Product Color:
- Silver
- Product Shape:
- Square
- Product Material:
- Steel
- Product Type:
- Raised Device Cover
Steel City RS 16 CC – Frequently Asked Questions
1) Will the Steel City RS 16 CC cover fit a standard 4-inch square outlet box?
Yes. The RS 16 CC is a 4 inch square surface cover, so it lands on the standard 4 square (1900) box footprint. It mounts to the box ears with the two center screws, same as any 4S raised cover.
2) What device does the RS 16 CC cover accept, a GFCI or a duplex receptacle?
It is punched for one GFCI/decorator device, not a standard duplex. The opening is the rectangular decorator style, so a self-contained GFCI receptacle or a decorator-style switch or receptacle mounts in it. A conventional duplex with the figure-eight face will not fill the opening correctly.
3) How much box fill volume does the RS 16 CC raised cover add?
Five cubic inches. That counts toward your total box fill calculation on top of the box's own volume, which matters when you are already tight on conductors in a 4 square with a GFCI and its pigtails.
4) Is the RS 16 CC cover suitable for a damp or outdoor location?
No. This is a pre-galvanized steel raised cover for surface-mounted indoor work. For wet or damp locations you need a weatherproof in-use cover with a gasket and a listed WP enclosure; a plain raised device cover does not provide that protection.
5) What is the raise height on the Steel City RS 16 CC?
It is a 1/2 inch raised cover. That half inch gives you the extra depth to fold conductors behind a GFCI body, which is the usual reason to pick a raised cover over a flat one on a 4 square.
6) Is the Steel City RS 16 CC UL listed?
Yes, it carries UL file E2969.
7) Will the pre-galvanized finish hold up in a garage or warehouse where the boxes are exposed?
Pre-galvanized steel is the standard finish for exposed indoor conduit work, including garages, mechanical rooms and warehouse ceilings. It gives the cover corrosion resistance in dry interior air. Where there is standing moisture, washdown, or salt exposure, specify a stainless or listed weatherproof cover instead.
8) If I am standardizing covers across a building, what part number do I reorder and how is it sold?
Order Steel City RS 16 CC, sold individually rather than by the carton, so you can buy exact counts for a punch list or stock a small MRO shelf. Made in the United States.
How fast can I get the Steel City RS 16 CC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Steel City RS 16 CC come with a warranty?
Absolutely. The Steel City RS 16 CC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Steel City RS 16 CC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Steel City RS 16 CC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.