Thomas & Betts AFM-2-BLK 2-Compartment Steel Floor Box, Black, 75 in³

Yes. The AFM-2-BLK is a two-compartment floor box, so line voltage can be kept physically separated from communications or AV cabling inside one rough-in. That separation is what code requires when you mix power and Class 2 wiring, and it is the main reason to pick this over a single-service box like the Wiremold 885B.

Six knockouts, so you can bring in a separate feed and a separate low-voltage raceway to each compartment and still have spares for a through-feed. Plan your knockout assignment before the pour so power and data enter on opposite sides.

It carries UL listing file E75944. For an institutional or government spec that calls for a listed floor box, that is the file number to reference on the submittal.

It is a galvanized steel floor box, which is the construction used for concrete-poured installations where the box has to take the weight of wet concrete and resist corrosion. If you are working in a wood floor or a retrofit cut-in, a shallow box such as the Wiremold 880M1 OmniBox or a PVC box like the Pass & Seymour TM1542 is the lighter-duty route.

The AFM-2-BLK is a two-compartment galvanized steel floor box with a 75 cubic inch volume, so it is built for an opening that needs power and a second service separated inside one box. If the opening only takes one service, the Wiremold 885B is an 880 Series shallow steel single service floor box, and the Wiremold 880W1 is a 1-gang steel floor box with 53 cubic inches. Both are steel like the AFM-2-BLK but carry a single service rather than two compartments.

75 cubic inches total. That is a deeper box than many single-gang floor boxes, for comparison the Wiremold 880W1 steel 1-gang box is 53 cubic inches. The extra volume matters when you are filling conductor counts across two compartments plus device wiring.

The AFM-2-BLK is sold as the box only, one each, in black. Covers, carpet or tile flanges, and the devices themselves are ordered separately, so confirm your floor finish before you pick the trim.

Order AFM-2-BLK. That is the manufacturer part number for the black two-compartment galvanized steel box, 75 cubic inches, and there is no sub-option to specify beyond it.

The AFM-2-BLK is galvanized steel with six knockouts and is UL listed under E75944. The Pass & Seymour TM1542 Series floor box is PVC instead of steel. Steel boxes are the usual choice where the installer is running metallic raceway into the knockouts and wants the box tied into that system; a PVC box suits nonmetallic conduit runs and settings where a nonmetallic body is preferred in the pour.

The 880M1 belongs to Wiremold's OmniBox Series and is a single gang shallow steel floor box. The AFM-2-BLK is a two-compartment galvanized steel box with 75 cubic inches of volume, six knockouts, and a black finish. The practical split is compartment count and depth: one shallow gang versus two compartments in a deeper, larger-volume body.

Country of origin is the United States, which is what agencies and school districts with domestic-sourcing language on the purchase order are looking for.