Supra 001267 Keysafe Pro, Multiple Key, Pushbutton, w/Cover

The KeySafe Pro (model 1267) is the multiple-key size, built for several keys at once, keys with large plastic head or fob handles, and access cards. Interior space comes from a box measuring 3-5/8 by 2-3/8 by 1-3/4 inches, so it swallows bulkier bunches that a single-key box will not close on. Maintenance crews commonly use it for lockout/tagout key sets.

It is a wall-mount box. The 001267 attaches to any wall or flat surface, and it also has a shackle with a rubber sleeve if you would rather hang it. Mounting hardware is not included, so pick up anchors and screws suited to your substrate (masonry, hollow block, wood stud) before the install visit.

Pushbutton combination, no key and no cylinder. You set the code yourself and can change it as often as you like, with over 1,000 possible combinations. For a property manager rotating vendors or a contractor handing off a site, that means you reset the code between trades rather than rekeying anything.

Yes. It ships with a weatherproof cover, plus a full rubber jacket around the key box and a rubber sleeve on the shackle, so an exterior wall or gate post is a normal application. The rubber jacket also keeps the box from marking painted siding or a glass-front frame.

Commercial. It is classed as commercial door hardware, and the intended uses named are shops and maintenance crews, including lockout/tagout key storage, rather than single-family realtor showings.

You get the lock box itself, the full rubber jacket that wraps the key box, the rubber sleeve for the shackle, and the weatherproof cover. No fasteners or anchors are supplied, so budget mounting hardware separately on every unit if you are standardizing a portfolio.

No. The two are unrelated despite the close numbers. The Supra 001267 KeySafe Pro is a pushbutton combination lockbox that holds multiple keys or access cards and attaches to any wall or flat surface, shipping with a full rubber jacket around the key box, a rubber sleeve on the shackle and a weatherproof cover. The Trimco 1268 is an anchor plate, 3-1/2 inches in diameter. If you need secured key storage, the Supra 001267 is the item; the Trimco 1268 will not store anything.

The Supra 001267 KeySafe Pro is combination-only: you set the pushbutton code and can change it as often as you want, with over 1,000 combinations available, and it is sized for multiple keys, access cards and keys with large handles at 3-5/8 inches high by 2-3/8 inches wide by 1-3/4 inches deep. It is not a cylinder-based product. Where you want a keyed cylinder in the mix instead, GMS offers small format interchangeable core options such as the IC6-26D 6-pin and IC7-26D 7-pin un-combinated cores, and the ICM7-ST 7-pin straight mortise housing with a Yale cam. Those serve a door or cabinet cylinder, not standalone key storage.

Black only, one configuration. If you are fitting a run of them across a campus they will all match without any finish selection at order time.