You may also like
SWD XFORM LINK TNCU 2100A 4H 380MM
Manufacturer Resources
Product Specs
- Cable Length:
- 15 in380 mm
- Conductor Category:
- Flexible
- Conductor Shape:
- Flat
- Country Of Origin:
- United States (US)
- Material Of Conductor:
- Tin-Plated Copper
- Product Group:
- Power Distribution
- Product Type:
- Transformer Link Connector
- Selling Unit Of Measure:
- each
- Standards:
- IEEE / ANSI C37, 34
- Type2:
- Flexible braid
- Department:
- Electrical
- Product Subgroup:
- Power Distribution Blocks
Blackburn SWD210A1380 – Frequently Asked Questions
1) What is the Blackburn SWD210A1380 flexible braid connector used for?
It's a flexible transformer link, also called a shunt or braid connector, used to carry current between two bolted terminal pads where some movement or misalignment has to be absorbed. The conductor is flat, flexible, tin-plated copper, and it bolts in with a 4-hole pattern on each end. Typical use is switchgear and transformer bushing-to-bus connections.
2) How long is the SWD210A1380 transformer link?
380 mm, which is 15 inches. That's the overall link length, so plan your pad-to-pad spacing around it. A longer or shorter run needs a different length in the SWD series rather than stretching or bending this one to reach.
3) What current rating does the Blackburn SWD210A1380 carry?
The part is designated 2100A in the SWD series naming. Match the link rating to the switchgear or transformer connection it is bridging; if your bus runs above that, step up to a higher-rated SWD link rather than paralleling two.
4) What is the exact part number to order for the 2100A 380mm four-hole Blackburn link?
Blackburn SWD210A1380. That number encodes the SWD transformer link family, 2100A, and the 380 mm length; the four-hole termination pattern is part of the same build.
5) Why tin-plated copper instead of bare copper on a transformer link?
The tin plating on the copper braid protects the contact surface from oxidation at the bolted pads, which keeps joint resistance stable over time. It also mates cleanly with aluminum or tin-plated bus pads without the galvanic issues of a bare copper-to-aluminum joint.
6) Is the SWD210A1380 sold individually or in pairs?
Sold each. A three-phase connection needs three, so order by the count of terminations, not by the number of transformers.
7) Is the Blackburn SWD210A1380 made in the USA?
Country of origin is the United States, which matters if you are buying under a domestic-content or Buy American procurement requirement.
How fast can I get the Blackburn SWD210A1380 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn SWD210A1380 come with a warranty?
Absolutely. The Blackburn SWD210A1380 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn SWD210A1380?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn SWD210A1380 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.