You may also like
SWG XFORM LINK TNCU 2100A 4H 915MM
Manufacturer Resources
Product Specs
- Cable Length:
- 915 mm
- Conductor Category:
- Flexible
- Conductor Shape:
- Flat
- Country Of Origin:
- United States (US)
- Material Of Conductor:
- Tin-Plated Copper
- Product Group:
- Power Distribution
- Product Type:
- Transformer Link Connector
- Selling Unit Of Measure:
- each
- Standards:
- IEEE/ANSI C37.34
- Type2:
- Flexible braid
- Department:
- Electrical
- Product Subgroup:
- Power Distribution Blocks
Blackburn SWD210A1915 – Frequently Asked Questions
1) What is the Blackburn SWD210A1915 flexible braid connector used for?
It's a flexible braided link for switchgear and transformer connections, rated 2100A, made from tin-plated copper in a flat, flexible braid form. The flexibility lets it absorb vibration, thermal expansion and slight misalignment between rigid bus bars or transformer pads, which a solid bar connection cannot do.
2) How long is the Blackburn SWD210A1915 braid link and how many bolt holes does it have?
915 mm overall, with a 4-hole pad arrangement (two holes each end). Lay out your bus pads to that 915 mm span before ordering, since a braid this length is not something you shorten in the field.
3) Does the Blackburn SWD210A1915 switchgear link meet a recognized standard?
It's built to IEEE/ANSI C37.34, the standard for high-voltage air switches and their connections. That's the reference a utility or institutional spec writer usually calls out for switchgear flexible connectors.
4) Why is the SWD210A1915 braid tin-plated instead of bare copper?
Tin plating on the copper braid slows oxidation at the bolted contact faces and makes the connection suitable where aluminum bus is involved, since bare copper against aluminum invites galvanic corrosion. It also keeps contact resistance stable over time in outdoor or humid switchgear enclosures.
5) Is the 2100A rating on this Blackburn link the continuous current it carries?
The SWD210A1915 is designated a 2100A link, so match it to a bus or switch rated at or above your continuous load. Undersizing a flexible connection is the usual cause of a hot joint on a switchgear termination, so don't substitute a lower-ampacity braid to save a length.
6) Is the Blackburn SWD210A1915 sold individually or in a pack?
Sold each. If you're jumpering three phases you'll need three, plus any ground link separately.
7) Are hardware and bolts included with the Blackburn SWD210A1915 braid connector?
The item is the flexible braid link itself, drilled 4-hole for bolting. Plan on supplying your own bolts, Belleville washers and nuts sized to the pad holes, and torque them to the switchgear manufacturer's figures.
8) Where is the Blackburn SWD210A1915 made?
Manufactured in the United States, which matters if the job carries a domestic-content requirement such as a federal or utility procurement clause.
How fast can I get the Blackburn SWD210A1915 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn SWD210A1915 come with a warranty?
Absolutely. The Blackburn SWD210A1915 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn SWD210A1915?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn SWD210A1915 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.