Ocal ELL3-G PVC-Coated Rigid S...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$335.01
Ocal ELL3-G PVC-Coated Rigid Steel 90-Degree Conduit Elbow, 3-Inch

Ocal ELL3-G PVC-Coated Rigid Steel 90-Degree Conduit Elbow, 3-Inch

(No reviews yet) Write a Review

Model: ELL3-G

In Stock (leaves warehouse same day if ordered before 3pm ET)

$335.01
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Thomas & Betts Ocal ELL3-G PVC-Coated Rigid Steel 90-Degree Conduit Elbow, 3-Inch

The Thomas & Betts Ocal ELL3-G is a PVC-coated, hot-dip galvanized rigid steel 90-degree elbow engineered for corrosion-resistant conduit routing in demanding industrial, wastewater, and outdoor applications. This 3-inch standard radius elbow combines a rugged rigid steel body with a protective PVC coating applied over hot-dip galvanized steel, guarding against moisture, chemical exposure, and UV degradation. Part of the trusted Ocal line from Thomas & Betts, the ELL3-G delivers a dependable directional change for rigid conduit systems where standard galvanized fittings fall short in corrosive or highly humid environments. Electrical contractors specify this elbow when a conduit run must change direction while maintaining long-term protection against rust, chemical attack, and coating degradation.

Key Features

  • Trade Size: 3-Inch trade size matches standard rigid conduit runs for straightforward integration into existing systems.
  • Durable Construction: Rigid steel body provides the strength and rigidity required for demanding industrial and outdoor conduit installations.
  • Hot-Dip Galvanized Base: Hot-dip galvanized rigid steel offers a robust corrosion-resistant foundation beneath the exterior PVC coating.
  • PVC Coating: Exterior PVC coating adds an extra layer of protection against moisture, chemicals, and UV exposure in corrosive or wet-location environments.
  • Standard Radius 90-Degree Bend: Delivers a smooth, code-compliant directional change in rigid conduit runs without restricting wire pull.
  • Bend Radius Design: Standard radius geometry provides ample clearance for conductor pulling, easing installation and reducing wire strain.
  • Ocal Series: Manufactured under the established Ocal product line, purpose-built for PVC-coated rigid conduit fitting systems.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Wastewater Treatment and Chemical Processing Facilities
  • Corrosive and High-Moisture Industrial Environments
  • Outdoor and Underground Rigid Conduit Runs
  • Coastal and Marine Electrical Installations
  • Industrial Facilities Requiring PVC-Coated Conduit Protection
  • Renovation and New Construction Projects Needing Corrosion Protection

Why Thomas & Betts?

Thomas & Betts backs the Ocal ELL3-G with a hot-dip galvanized rigid steel foundation and an added exterior PVC coating, combining structural strength with long-term corrosion resistance for the toughest electrical environments. This dual-layer construction approach helps ensure the elbow continues performing reliably in wet, corrosive, or chemically aggressive locations where uncoated or single-layer fittings degrade over time. Choosing the Ocal line from Thomas & Betts means specifying a rigid conduit fitting built for durability, protective coating integrity, and code-compliant performance on professional electrical installations.

Manufacturer Resources

Product Specs

list_batch:
TB-20260918
Product Type:
Conduit Elbow
Product Finish:
PVC-Coated
Angle:
90-Degree
Series:
Ocal
Department:
Electrical
Product Subgroup:
Metallic Conduit
Product Material:
Galvanized Steel
Product Size:
3-Inch
Product Group:
Conduit & Raceway
Product Color:
Gray

Ocal ELL3-G – Frequently Asked Questions

1) Will the Ocal ELL3-G elbow thread onto 3-inch rigid steel conduit?
Yes. The ELL3-G is a 3-inch trade size 90-degree elbow built for rigid steel conduit runs, so it mates with standard 3-inch rigid conduit. It is a rigid steel body, hot-dip galvanized, with the PVC coating applied over that. For a continuous coated system, the mating conduit should also be PVC-coated so the protective jacket is not broken at the joint.
2) Is a PVC-coated elbow worth it over a plain galvanized elbow for an outdoor run?
Where the run is only exposed to weather and not to chemicals, standard galvanized fittings usually hold up. The reason to spend on the Ocal ELL3-G is corrosive duty: wastewater and chemical processing, coastal and marine work, high-moisture industrial areas, and underground runs. There the PVC jacket over the hot-dip galvanized steel handles moisture, chemical attack, and UV that uncoated fittings degrade under.
3) Does a 3-inch standard radius elbow give enough room to pull conductors?
The ELL3-G is a standard radius 90, which is the geometry normally used in rigid conduit runs and gives the clearance needed for a conductor pull without excess strain on the wire. If your pull calls for a long-radius sweep because of large or stiff conductors, a standard radius elbow is not the right part and you want a large radius elbow instead.
4) Can I use a coated rigid elbow in a direct-burial or underground conduit run?
Yes, underground and outdoor rigid conduit runs are among the applications the Ocal ELL3-G is built for. Buried steel is where coating matters most, since soil moisture attacks threads first. Keep the jacket intact when you wrench the fitting and patch any coating damage at the joint before backfilling.
5) What is the exact part number and color of the Ocal 3-inch 90-degree coated elbow?
Order it as Thomas & Betts Ocal ELL3-G. It is gray, which is the standard Ocal PVC coating color, so it matches the rest of a coated Ocal conduit system visually on exposed runs.
6) Will a PVC-coated elbow still bond and ground like regular rigid steel?
The body under the coating is hot-dip galvanized rigid steel, so the elbow itself is a metallic conduit fitting. Because the PVC jacket is an insulator on the outside, coated systems are normally bonded through the threaded metal-to-metal connection at each joint, and installers commonly add external bonding jumpers where the coating interferes with continuity.
How fast can I get the Ocal ELL3-G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ocal ELL3-G come with a warranty?
Absolutely. The Ocal ELL3-G is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ocal ELL3-G?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ocal ELL3-G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!