Toner-PRO Tone Generator
VDV500-063 - spec sheet
Warnings
- Do not use instruments if they are damaged in any way.
- Do not open the case, other than the battery compartment
- Do NOT use on energized circuits.
- The battery door must be in place and secure before you operate.
- Do not use instruments if they are wet, as it could pose a shock hazard.
- Carefully read all instructions.
- Read all safety information before using.
- Turn off instruments and disconnect all test leads before attempting to replace batteries.
Features
- Angled Bed of Nails (ABN) Teleco Clips; Lanyard Loop
- RJ11 plug easily connects to telephone or RJ45 data jacks to tone individual conductors or wire pairs
- Loop for a lanyard
- Professional grade analog tone generator for open-ended, non-active wiring
- Rugged Angled Bed of Nails (ABN) clips securely attach to wires
- Tests for continuity and polarity with response displayed on clearly labeled, easy-to-read LEDs
- Auto Power-Off and Low Battery Indicator
- For use with Probe-Pro Tracing Probe (VDV500-123) required (sold separately)
- Five distinct tone cadences
- (4) AAA Batteries included
VDV500-063 - spec sheet
Manufacturer Resources
Product Specs
- Auto Power Off:
- Yes
- Batteries:
- 4 x AAA
- Battery Life:
- 120 hr
- Continuity Testing:
- Yes
- Depth:
- 2.5000 in
- Height:
- 4.2500 in
- Low Battery Indicator:
- Yes
- Material:
- Plastic and Metal
- Overall Height:
- 4.25" (10.8 cm)
- Overall Length:
- 2.5" (6.4 cm)
- Overall Width:
- 1" (2.5 cm)
- Power On Led Indicator:
- Yes
- Tones:
- 5
- Type:
- RJ45 and RJ11 Wire Tracer
- Visual Notification:
- LED
- Weight:
- 0.4000 lbs
- Width:
- 1.0000 in