TownSteel TS8100 Series - Fire...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$463.00
$460.61

TownSteel TS8100 Series - Fire Rated 36" X 84" Heavy Duty Grade 2 Surface Vertical Rod Exit Devices

(No reviews yet) Write a Review

Model: TS8100-3684-AL
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$463.00
$460.61
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

TS8100 Grade 2 Surface Mount Vertical Fire Device

TS8100 Series is Grade 2 surface mount vertical rod rim device and UL listed fire hardware.

Specifications

Series

  • TS8100

Code Compliances

  • Grade 2 listed, Certified ANSI/BHMA

Application

  • All single/double doors with a mullion

Door Thickness

  • 1-3/8" - 2"

Device Length

  • 36" for 30" to 36" wide openings

Latch Bolt

  • 3/4" throw, stainless steel, deadlocking

Dogging

  • Not Available

Minimum Stile Width

  • 3-1/2"

Product Specs

Series:
TS8100
Grade:
Grade 2
Product Group:
Exit Devices and Trim
Product Subgroup:
Exit Devices - Vertical Rod
Product Type:
Exit Devices - Surface Vertical Rod
Subcategory:
Fire Surface Vertical Rod Exit Device
Commercial/Residential:
Commercial
Duty Level:
Heavy Duty
Stile Type:
Wide Stile
Fire Rating:
Yes
Product Category:
Exit Devices and Trim
Department:
Door Hardware

TownSteel TS8100-3684-AL – Frequently Asked Questions

1) Will the TownSteel TS8100 exit device fit a 36 inch wide door?
Yes. The 36 inch TS8100 device covers openings 30 to 36 inches wide, so a 36 inch leaf is at the top of its range. The door also needs a stile of at least 3-1/2 inches to take the wide stile case, and the device works on doors 1-3/8 to 2 inches thick.
2) Can I use the TS8100 on a pair of doors without a mullion?
No. The TS8100 is specified for single doors and for double doors with a mullion. On a pair with no center mullion you need a device set intended for that opening, such as a surface vertical rod pair where both leaves latch top and bottom, not this device.
3) Is the TownSteel TS8100 fire rated?
Yes, the TS8100 is UL listed fire hardware and carries a fire rating. That is also why dogging is not available on it: fire exit hardware has to latch on every closing. If you need hold-open dogging for a non-rated opening, choose a non-rated device instead.
4) The TownSteel TS8100 needs a 3-1/2 inch stile. What fire rated vertical rod device works on a narrow stile aluminum door?
The TS8100 is a wide stile device with a 3-1/2 inch minimum stile width. For a narrow stile opening that still needs a fire rating, the Arrow S1150 is a fire rated surface vertical rod exit device listed for narrow or wide stile applications, supplied as device only, less trim. Most other narrow stile devices in the category, such as the Von Duprin 3327A and the Corbin Russwin ED4400, are not fire rated.
5) What is a Grade 1 fire rated surface vertical rod exit device that can replace the TownSteel TS8100 on a 36 inch wide stile opening?
The TownSteel TS8100 is a Grade 2 fire rated surface vertical rod device for wide stile doors. If the spec calls for Grade 1 on the same type of opening, the Sargent 2727 is a Grade 1 fire rated reversible surface vertical rod exit device with wide stile design in the 20 Series, and the Sargent 3727 is a Grade 1 wide stile surface vertical rod exit device with a standard push bar in the 30 Series. The Adams Rite 3100 Series is also a Grade 1 fire rated wide stile surface vertical rod device, sized at 30 inches.
6) Which surface vertical rod exit devices are NOT fire rated and should not be substituted for the TownSteel TS8100 on a fire door?
Plenty of otherwise similar 36 inch surface vertical rod devices carry no fire rating and cannot stand in for the TS8100, which is UL listed fire hardware. The Von Duprin 2227-3FT wide stile Grade 1, the Corbin Russwin ED5400 Grade 1 wide stile, the Falcon 20 Series and Falcon 25-V-EO wide stile Grade 1 devices, and the BEST Precision 2201 are all listed as not fire rated. They are life safety or panic devices for non rated openings only.
7) Can I use the Von Duprin 7527 or 7827 on a wood fire door instead of the TownSteel TS8100?
No. The Von Duprin 7527-3ft and 7827-3ft are both listed as not wood door compatible and not fire rated. The TownSteel TS8100 is UL listed fire hardware covering a 1-3/8 inch to 2 inch door thickness range, which is the device to carry forward on a rated opening.
8) Does the TS8100 have hex key or cylinder dogging?
No dogging of any kind on the TS8100. The device latches every time the door closes, which is required of fire rated exit hardware. If a facility wants push-pull free operation during business hours, look at a non-rated device with dogging such as the Von Duprin 7827-3ft, which lists hex key dogging.
9) Will the TS8100 latch into my existing top strike?
The TS8100 uses a 3/4 inch throw stainless steel deadlocking latch bolt at the top. A 3/4 inch throw is the common surface vertical rod dimension, but strike location and prep vary by brand, so plan on using the strike supplied with the device rather than reusing an odd one already in the frame.
10) What is the difference between Grade 1 and the Grade 2 TS8100 for a commercial opening?
The TS8100 is certified ANSI/BHMA Grade 2 and rated heavy duty for commercial use, which suits moderate traffic openings where a fire rated device is required. Grade 1 is the higher cycle and strength tier, used for high abuse entries. Grade 1 fire rated wide stile alternatives include the Adams Rite 3100 Series and the Sargent 2727.
11) Should I use a surface vertical rod device or a rim device with a mullion on my double doors?
A surface vertical rod like the TS8100 latches at the head and the sill, which spreads the load and holds the leaf tight, and it is listed here for single doors and pairs with a mullion. A rim device latches into a strike on the mullion only and is simpler to install and maintain since there are no rods or bottom latch to adjust. If a removable mullion is already in the opening and you want the least maintenance, a rim device is the easier choice; the vertical rod is what you want where the door needs two point latching.
12) I need to standardize fire rated exit devices across a building. What else does the TS8100 compete with?
Among fire rated surface vertical rod devices, the TS8100 is the Grade 2 heavy duty option with the widest door thickness range at 1-3/8 to 2 inches. Grade 1 fire rated alternatives are the Adams Rite 3100 Series (wide stile, 1-3/4 inch doors), the Arrow S1150 (narrow or wide stile, exit only, less trim) and the Sargent 2727 wide stile reversible device. Choosing one series for the whole facility keeps strikes, rods and spare parts common.
13) Will the TownSteel TS8100 fit a door thinner than 1-3/4 inches, and what are the alternatives if not?
The TS8100 covers a door thickness range of 1-3/8 inch to 2 inch, so it suits doors on either side of the common 1-3/4 inch slab. Many comparable devices are listed for 1-3/4 inch only, including the Von Duprin 2227-3FT, the Falcon 20 Series, the Corbin Russwin ED5400 and the Adams Rite 3100 Series. For a 1-3/8 inch door the TS8100 range is the one to check against.
14) Is there another Grade 2 surface vertical rod exit device comparable to the TownSteel TS8100?
The Dexter ED2000 Series is the other Grade 2 surface vertical rod panic device in the same class. The difference that matters for an opening with a rated door: the TS8100 is fire rated, while the Dexter ED2000 is listed as not fire rated, which limits it to non rated openings.
15) The TownSteel TS8100 has no dogging. Which surface vertical rod device offers dogging instead?
Dogging is not available on the TS8100, which is expected on fire hardware since a rated door has to latch. If the opening is not rated and you want the pushpad held down during business hours, the Von Duprin 7827-3ft is a 3 ft surface vertical rod exit device with hex key dogging, listed as Grade 1 and not fire rated.
16) What is the difference between the TownSteel TS8100 and the Sargent 12-8710 fire rated vertical rod device?
The Sargent 12-8710 is a fire rated wide stile surface vertical rod device in the 8700 Series listed with a dummy function, meaning it is a non latching push bar used on the inactive leaf or for appearance matching. The TownSteel TS8100 is a working device with a 3/4 inch throw deadlocking stainless steel latch bolt. If you need the door to latch, the two are not interchangeable.
17) Is there a lighter duty or less costly alternative to the TownSteel TS8100 for a non rated stairwell or utility door?
The TS8100 is a heavy duty device. On a non rated opening where heavy duty is not required, the Design Hardware 2000V is a standard duty 33 inch surface vertical rod exit device and the Orca Hardware OED56 Series is a standard duty 36 inch exit only device, less bottom rod, non handed, in aluminum finish. Neither is fire rated, so both are limited to openings with no rating requirement.
18) Do I need to order handed for the TownSteel TS8100, or is there a reversible surface vertical rod device?
If a reversible or non handed device simplifies stocking across a building, the BEST Precision 5201 Series 36 inch surface vertical rod device is listed as reversible, the Sargent 2727 is a reversible Grade 1 fire rated device, and the Von Duprin 2227-3FT is a 36 inch non handed wide stile Grade 1 device. Of those three, the Sargent 2727 is the one carrying a fire rating, matching the TownSteel TS8100 on that point.
19) Which alternatives to the TownSteel TS8100 accept exterior operator trim rather than being exit only?
The TownSteel TS8100 serves single and double doors with a mullion. If the opening also needs outside key or lever entry, the Corbin Russwin ED5400 is a Grade 1 wide stile surface vertical rod device listed as exit only, accepts trim, and the Corbin Russwin ED7400 is a narrow stile crossbar device that accepts operator trim. Both are listed as not fire rated. By contrast, the Falcon 19-V-EO, Falcon 24-V-EO and Arrow 3700 are exit only.
20) What finishes does the TownSteel TS8100 36 inch device come in?
Two finishes in the 36 x 84 inch size: 630 satin stainless steel and AL aluminum painted. Satin stainless is the usual pick when matching other stainless exit hardware in a corridor; aluminum painted blends with clear anodized storefront and aluminum frames.
How fast can I get the TownSteel TS8100-3684-AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the TownSteel TS8100-3684-AL come with a warranty?
Absolutely. The TownSteel TS8100-3684-AL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the TownSteel TS8100-3684-AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the TownSteel TS8100-3684-AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.