You may also like
1211 UNIVERSAL DOOR STOPS OVERVIEW
The patented Trimco 1211 Series Universal Dome Stop is widely used due to its durability and versatility. With a low dome stop type lip and a high dome stop rubber height, the 1211 Series is the right choice for general uses like offices and hotels. The wrought version W1211 is manufactured by a cold-forging process and can hold up to the most demanding applications. The rubber face is sloped so that electrical cords from vacuum cleaners or polishers slide over the top instead of getting caught on the stop.
FEATURES & BENEFITS
- Highly durable and versatile.
- Combines low lip and high dome for most applications.
- Sloped face of W1211 easily bypassed by vacuum and floor polisher cords.
- Combo pack fasteners included standard for multiple floor types.
- Carpet risers also available.
APPLICATIONS
- Commercial & Industrial Buildings
- Retail & Strip Malls
- Hospitality
- Office Buildings
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Series:
- 1211 Series
- ADA Compliant:
- Yes
- Warranty:
- Lifetime
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Product Type:
- Floor Door Stops
- Subcategory:
- Door Stops, Holders, Silencers & Bumpers
- ANSI/BHMA:
- BHMA L02141/L02161
- Commercial/Residential:
- Commercial
- Product Category:
- Door Trim and Accessories
- Department:
- Door Hardware
Trimco TRI-1211CL.628 – Frequently Asked Questions
1) What does the Trimco 1211 carpet riser actually do, and do I need one?
A carpet riser is a spacer that mounts under a cast 1211 Series universal dome stop to lift it above carpet or pad, so the door strikes the rubber bumper instead of burying the stop in the pile. On a bare floor, tile, or thin commercial glue-down, you mount the 1211 stop directly and skip the riser. The riser is the accessory the 1211 Series cutsheet refers to when it says carpet risers are also available.
2) Which carpet riser height do I order, 1/2 inch or 3/4 inch?
Two heights are offered, 1/2 inch and 3/4 inch. Match the riser to the finished carpet and pad thickness at the stop location: a commercial low-pile glue-down with no pad generally clears with the 1/2 inch, while carpet over a separate pad usually needs the 3/4 inch. Measure the pile plus pad where the stop lands, not at the doorway, since pad compresses differently under the base.
3) Does adding a carpet riser under the 1211 dome stop break ADA compliance?
The 1211 Series universal dome stop is listed as ADA compliant, and the riser is the part that keeps that geometry correct on carpet rather than defeating it. Without it the stop sinks into the pile and the door swings past its intended point. The 1211 Series carries BHMA L02141/L02161.
4) Will the Trimco carpet riser fit the wrought W1211 stop as well as the cast one?
This riser is made for the cast 1211 dome stop. The wrought W1211 is a cold-forged version of the stop with a different sloped face, and its base is a separate item, so order the riser against the cast 1211 you are actually mounting.
5) What finishes does the Trimco 1211 carpet riser come in so it matches the dome stop?
Four finishes, all standard BHMA codes so they pair with the stop above them: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, and 628 satin aluminum. Both the 1/2 inch and 3/4 inch heights are offered in all four. Order the riser in the same finish code as the 1211 stop, since the riser sits exposed between the stop and the floor.
6) Do I get the fasteners I need to mount the 1211 stop through the riser into a concrete slab?
The 1211 dome stop ships with a combo pack of fasteners covering multiple floor types as standard. The riser adds 1/2 or 3/4 inch of stack height between the stop and the floor, so on a slab confirm the anchor in that pack is long enough to still get full embedment once the riser thickness is taken up.
7) Will vacuum cords catch on a 1211 stop once it is raised on a carpet riser?
The rubber face on the wrought W1211 is sloped specifically so cords from vacuums and floor polishers ride over the top rather than snagging. On carpeted corridors where housekeeping equipment runs daily, that sloped face is the reason to spec the wrought version over the cast one, and the riser keeps the bumper at working height in the pile.
How fast can I get the Trimco TRI-1211CL.628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Trimco TRI-1211CL.628 come with a warranty?
Absolutely. The Trimco TRI-1211CL.628 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Trimco TRI-1211CL.628?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Trimco TRI-1211CL.628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.