Ty-Rap Self-Adhesive Cable Cla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.96
Ty-Rap Self-Adhesive Cable Clamps - Full Clip (PCNY Series)

Ty-Rap Self-Adhesive Cable Clamps - Full Clip PCNY Series Cable Management System

(No reviews yet) Write a Review

Model: PCNY-250-9-D

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ty-Rap Self-Adhesive Cable Clamps - Full Clip PCNY Series Cable Management System

Professional cable organization with secure adhesive mounting

The Ty-Rap Self-Adhesive Cable Clamps PCNY Series delivers reliable cable management solutions with convenient adhesive mounting technology. These full clip cable clamps provide secure cable routing and organization for professional installations without requiring drilling or mechanical fasteners.

Professional Features & Benefits

  • Self-Adhesive Design: Eliminates the need for drilling or screws, enabling quick installation on clean surfaces while maintaining strong holding power.
  • Full Clip Configuration: Provides complete cable enclosure and protection, preventing cables from slipping out during installation or service.
  • PCNY Series Construction: Engineered for reliable performance with consistent clamping force and long-term adhesive bond strength.
  • Cable Management Efficiency: Organizes multiple cable runs while maintaining neat, professional appearance in visible installations.
  • Versatile Mounting: Adheres to various clean surfaces including metal, plastic, and painted surfaces for flexible installation options.
  • Professional Grade Materials: Constructed for durability and resistance to typical environmental conditions in commercial and residential applications.

Technical Specifications

  • Limited technical data available.

Installation & Operation

  1. Clean the mounting surface thoroughly to remove dirt, oil, and debris for optimal adhesive bond.
  2. Remove the adhesive backing and position the clamp in the desired location with proper cable routing alignment.
  3. Press firmly for several seconds to ensure complete adhesive contact and initial bond formation.
  4. Route cables through the full clip opening, ensuring proper fit without over-compression or binding.
  5. Allow adhesive to cure according to manufacturer recommendations before applying full cable load.
  6. Inspect installation periodically and replace clamps if adhesive bond shows signs of degradation.

Professional Applications

  • Commercial Office Buildings
  • Residential Wiring Projects
  • Industrial Control Panels
  • Telecommunications Installations
  • Data Center Cable Management
  • Retail and Hospitality Facilities
  • Educational Institution Upgrades

Why Choose Ty-Rap Quality?

Ty-Rap cable management products deliver proven reliability and professional performance for demanding installation environments. The PCNY Series self-adhesive clamps combine convenience with dependable holding power, making them the preferred choice for contractors and technicians who require efficient cable organization solutions.

Manufacturer Resources

Product Specs

Special Functions:
Choose from four sizes to accommodate bundles up to 1/2 inch.
Product Material:
Nylon/polyamide 6.6
Product Color:
Natural
Country Of Origin:
United States
Department:
Electrical

Ty-Rap PCNY-250-9-D – Frequently Asked Questions

1) What cable bundle size do the Ty-Rap PCNY Series self-adhesive clamps hold?
The PCNY Series full clip clamps come in four sizes covering bundles up to 1/2 inch. The orderable configuration is the 6.35mm cable diameter clip, model PCNY-250-9-D, which handles a quarter-inch bundle. If your run is larger than 1/2 inch overall, this family is the wrong clamp.
2) What surfaces will these adhesive-backed cable clamps stick to?
The adhesive backing bonds to clean metal, plastic, and painted surfaces. The surface has to be wiped free of dirt, oil, and debris first, then the clip pressed firmly for several seconds. No drilling or screws are involved, which is why these get used in finished offices, retail spaces, and panel interiors where you can't put a hole in the substrate.
3) Can I use self-adhesive cable clamps instead of screw-mount clips on a painted drywall or metal surface?
Yes, as long as the surface is clean and sound. The adhesive mount is the reason to pick these: nothing gets drilled, so you aren't breaching a painted wall, a panel enclosure, or a finished ceiling. The tradeoff is that the bond depends on surface prep and cure time, so the load should not go on the clip until the adhesive has cured, and the installation should be checked over time for bond degradation. Where the cable is heavy or the surface is dirty, oily, or textured, a mechanically fastened clip is the safer choice.
4) Is a full clip cable clamp better than an open-sided clip for vertical cable runs?
A full clip encloses the cable completely rather than cradling it in an open saddle, so the cable can't pop out while you are pulling or servicing the run. That matters on vertical drops, overhead routing, and anywhere a tech will be handling adjacent cables later. An open clip is quicker to drop a cable into after the fact, but it won't retain it the same way.
5) What material are the Ty-Rap PCNY clamps made of, and will they hold up in a control panel?
They're molded from nylon/polyamide 6.6 in natural color. Nylon 6.6 is the standard material for cable ties and clips in commercial and industrial work, and these are used in industrial control panels, telecom closets, and data center cable management. Natural nylon is uncolored, so for exposed runs on a dark surface expect the clip to be visible.
6) How are Ty-Rap PCNY-250-9-D clamps packaged for a large job?
The PCNY-250-9-D ships bulk at 500 pieces, which suits whole-floor rough-ins, panel builds, and MRO stock rather than a single small repair. Buyers standardizing a facility on one clip size usually take the bulk pack so every opening and panel gets the same part.
7) Are Ty-Rap PCNY cable clamps made in the USA?
Yes. The PCNY Series self-adhesive full clip clamps have a country of origin of United States, which matters on government, education, and other publicly funded work with domestic sourcing requirements.
How fast can I get the Ty-Rap PCNY-250-9-D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ty-Rap PCNY-250-9-D come with a warranty?
Absolutely. The Ty-Rap PCNY-250-9-D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ty-Rap PCNY-250-9-D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ty-Rap PCNY-250-9-D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!