You may also like
UNINSULATED STA-KON TERMINAL
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal - 90 Degree Bend
- Wire Size:
- 2/2AN
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon G975U – Frequently Asked Questions
1) Why does the G975U ring terminal have a 90 degree bend in it?
The tongue on the G975U sits at a right angle to the wire barrel, so the ring lands flat on a stud or terminal block while the conductor runs off perpendicular. Electricians reach for the flag style when there isn't room to bring the wire straight into the stud, such as tight panel gutters, motor terminal boxes, or crowded busbar landings. If your conductor can approach the stud in line with the tongue, a straight ring terminal is the simpler choice.
2) What wire size does the Sta-Kon G975U terminal take?
The G975U is listed for 2/2AN wire size. Crimp barrels are sized to the conductor, so a conductor outside that range either won't seat in the barrel or won't hold tension after crimping. Confirm the gauge of the cable you are landing before you order a quantity for a panel build.
3) Is the Sta-Kon G975U terminal insulated or bare?
Bare. The G975U is an uninsulated copper ring terminal, so there is no nylon or vinyl sleeve over the barrel. That means you can see the conductor seated in the barrel before you crimp, and you can add your own heat shrink or sleeving afterward if the application needs strain relief or phase color coding.
4) Is a copper ring terminal like the G975U OK for aluminum conductors?
No. The G975U is a copper terminal, which is intended for copper conductors. Landing aluminum in a copper-only barrel sets up dissimilar metal corrosion at the joint; aluminum feeders need a terminal marked AL or AL9CU with the appropriate compound. For copper cable in a panel, motor box, or control cabinet, the copper barrel is the correct match.
5) Can I install the Sta-Kon G975U with pliers, or do I need a crimper?
Use a crimp tool. The G975U is a crimp-style uninsulated barrel, and a proper die set compresses the barrel evenly around the conductor for a connection that holds mechanically and electrically. Squeezing it with pliers deforms the barrel and leaves a high-resistance joint that heats under load. Uninsulated barrels take a bare-terminal die, not the color-coded insulated die.
6) What is the exact part number and origin for ordering the Sta-Kon flag ring terminal?
Order it as Sta-Kon G975U. That is the manufacturer part number for the uninsulated 90 degree bend copper ring terminal, and it is made in Mexico. Quoting the full G975U designation matters because the Sta-Kon general terminal range runs dozens of adjacent barrel and tongue combinations that look alike on the shelf.
How fast can I get the Sta-Kon G975U delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon G975U come with a warranty?
Absolutely. The Sta-Kon G975U is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon G975U?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon G975U from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.