Unirac 310820 Stainless Steel ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.40
Image coming soon

Unirac 310820 Stainless Steel End Clamp For Use With Roof Mount RM5/DT South Facing 5-Degree/East-west 8-Degree Tilt Mounting System

(No reviews yet) Write a Review

Model: 310820

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.40
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Unirac 310820 Stainless Steel End Clamp for RM5/DT Tilt Mounting Systems

The Unirac 310820 is a stainless steel end clamp engineered specifically for use with the Roof Mount RM5/DT South Facing 5-Degree/East-West 8-Degree Tilt Mounting System. This end clamp secures the outermost module modules in a solar array to the RM5/DT rail assembly, providing a rigid, corrosion-resistant connection point that helps maintain module alignment and structural integrity under wind, snow, and thermal loading. Built from stainless steel, the 310820 end clamp is designed to withstand prolonged outdoor exposure while integrating seamlessly with the RM5/DT tilt-leg racking platform used in low-slope and flat commercial roof solar installations.

Key Features

  • Durable Construction: Fabricated from stainless steel for long-term corrosion resistance in rooftop solar environments.
  • System Compatibility: Purpose-built for use with the Unirac Roof Mount RM5/DT racking system.
  • Tilt Configuration Match: Designed for the South Facing 5-Degree/East-West 8-Degree tilt orientation of the RM5/DT platform.
  • End-of-Array Securement: Clamps the terminal module edge to the mounting rail, helping maintain consistent module spacing and array rigidity.
  • Finish: Stainless steel finish resists rust and weathering compared to uncoated hardware.
  • Professional-Grade Hardware: Designed as a dedicated racking component for commercial and industrial rooftop solar installations using Unirac RM5/DT systems.

Technical Specifications

  • Material: Stainless Steel
  • Compatible System: Unirac Roof Mount RM5/DT
  • Tilt Orientation: South Facing 5-Degree/East-West 8-Degree
  • Component Type: End Clamp

Typical Applications

  • Commercial and Industrial Rooftop Solar Arrays
  • Low-Slope and Flat Roof Solar Mounting Systems
  • Unirac RM5/DT Tilt-Leg Racking Installations
  • South-Facing and East-West Oriented Solar Arrays
  • New Construction and Retrofit Solar Projects

Why Unirac?

Unirac is a recognized name in solar racking, and the 310820 stainless steel end clamp reflects the system-specific engineering approach that defines Unirac's RM5/DT platform. Using genuine Unirac components ensures proper fit, load-path continuity, and long-term reliability across the rooftop mounting system. For installers and contractors working with the RM5/DT South Facing 5-Degree/East-West 8-Degree tilt configuration, the 310820 end clamp is the correct, purpose-matched hardware for securing array modules.

Manufacturer Resources

Product Specs

list_batch:
UNI-20260924
Product Type:
Module Clamp
Configuration:
RM5/DT South-Facing 5-Degree/East-West 8-Degree Tilt Mount
Department:
Electrical
Product Subgroup:
Solar & Clean Energy
Product Material:
Stainless Steel
Product Color:
Stainless Steel
Product Group:
Power Distribution

Unirac 310820 – Frequently Asked Questions

1) What does the Unirac 310820 end clamp actually do in a rooftop solar array?
It secures the outermost module edge of a row to the RM5/DT rail assembly. End clamps go at the terminal positions of each row; the modules in between are held by mid clamps. The 310820 keeps module spacing consistent and holds array rigidity under wind, snow, and thermal movement.
2) Will the Unirac 310820 end clamp work on a Unirac RM10 or SolarMount rail, or only RM5/DT?
Only RM5/DT. The 310820 is built specifically for the Unirac Roof Mount RM5/DT South Facing 5-Degree/East-West 8-Degree tilt mounting system. Unirac racking clamps are system-specific, so pulling a clamp off a different platform risks a bad fit and a broken load path. If your array is on another Unirac rail family, order the end clamp matched to that platform.
3) I'm ordering parts for an RM5/DT ballasted array. Is the 310820 the only clamp I need?
No. The 310820 handles the end-of-row positions only. A full RM5/DT row also needs mid clamps between adjacent modules, plus the rails, tilt legs, and ballast trays for the platform. Count your end clamp quantity off the number of row ends in the layout, not off module count.
4) Is the Unirac 310820 end clamp stainless steel all the way through, or just coated?
Stainless steel material, not a coating over carbon steel. Both the material and the finish are listed as stainless, which is why it holds up to prolonged rooftop exposure without the rust problems of uncoated or plated hardware. That matters on coastal and industrial roofs where clamp hardware sits exposed for the life of the array.
5) Does the 310820 clamp suit a flat commercial roof, or is it for pitched residential work?
Low-slope and flat commercial or industrial roofs. The RM5/DT platform it belongs to is a tilt-leg system that creates the array angle on a flat deck, either south-facing at 5 degrees or east-west at 8 degrees. On a pitched residential roof you would be using a flush-mount rail system instead, and this clamp would not be the right part.
6) Can I substitute a generic stainless end clamp for the Unirac 310820 on an RM5/DT system?
Not advisable. The 310820 is engineered to the RM5/DT rail interface, and the clamp is part of the load path that carries wind and snow forces from the module into the racking. A generic clamp may not seat in the rail channel and can void the engineering behind the array. Stay with the matched Unirac component for RM5/DT openings.
7) What is the manufacturer part number for the Unirac RM5/DT stainless end clamp?
The part number is 310820, sold as a single model with no finish or size options to specify. Order it as Unirac 310820 end clamp for RM5/DT.
How fast can I get the Unirac 310820 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Unirac 310820 come with a warranty?
Absolutely. The Unirac 310820 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Unirac 310820?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Unirac 310820 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.