You may also like
Strips UTP and STP cable up to .24" (6.2mm) diameter.
Manufacturer Resources
Product Specs
- Each In Package Height In :
- 5.5
- Each In Package Length Depth In :
- 0.63
- Each In Package Weight Oz :
- 0.8
- Each In Package Width In :
- 3.75
Gardner Bender GTPS-100 – Frequently Asked Questions
1) What size cable will the Gardner Bender GTPS-100 strip?
The GTPS-100 handles round UTP and STP data cable up to .24 inch (6.2 mm) outside diameter. That covers typical Cat5e and Cat6 patch and horizontal cable jackets in that OD range. If the cable you are running measures larger than .24 inch across the jacket, this is not the tool for it.
2) Will the GTPS-100 work on shielded cable, or just unshielded?
Both. The GTPS-100 is rated for UTP (unshielded twisted pair) and STP (shielded twisted pair) round cable, so a shielded run with a foil or braid layer under the jacket is within what it is built to strip, as long as the overall diameter stays at or under .24 inch.
3) Can I use this stripper on coax or flat telephone cable?
No. The GTPS-100 is a round-cable tool made for UTP and STP data cable up to .24 inch diameter. Flat satin phone cord has no round jacket for it to score, and coax needs a tool that cuts the jacket, braid and dielectric to set lengths. For coax you want a dedicated coax stripper instead.
4) What part number do I order for the Gardner Bender round data cable stripper?
Order Gardner Bender GTPS-100. That is the manufacturer part number for the UTP/STP round cable stripper, and it ships as a single tool with no size or finish options to specify.
5) Does the GTPS-100 cut the conductors too, or only the jacket?
It is a jacket stripper. The GTPS-100 is built to ring and remove the outer jacket on round UTP and STP cable up to .24 inch diameter so you can fan out the pairs. You will still need a flush cutter or the blade on your crimper to trim the pairs to length before seating a plug.
6) Is the Gardner Bender GTPS-100 small enough to keep in a pouch?
Yes. Packaged it runs 5.5 x 3.75 x 0.63 inches and weighs 0.8 ounces, so the tool itself drops into a tool pouch or a low-voltage tech's kit without taking up real space. It is a hand tool, not a bench unit.
How fast can I get the Gardner Bender GTPS-100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Gardner Bender GTPS-100 come with a warranty?
Absolutely. The Gardner Bender GTPS-100 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Gardner Bender GTPS-100?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Gardner Bender GTPS-100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.