Von Duprin 608DT Exit Device D...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$543.00
$391.57
Von Duprin 608DT Dummy Trim, Function, Trim for 88 Series Exit Devices

Von Duprin 608DT Exit Device Dummy Trim for 88 Series, Narrow 3/16" Flat Pull Grip, Non-Handed

(No reviews yet) Write a Review

Model: 608DT 26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$543.00
$391.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Von Duprin 608DT Exit Device Dummy Trim for 88 Series, Narrow 3/16" Flat Pull Grip, Non-Handed

Professional Dummy Trim Solution for Von Duprin 88 Series Exit Devices

The Von Duprin 608DT is a heavy-duty, Grade 1 commercial exit device dummy trim designed specifically for compatibility with Von Duprin 88 Series Exit Devices. Featuring a narrow profile construction at just 3/16" (5 mm) thick, this trim is available in brass, bronze, or stainless steel and incorporates a flat pull grip for a clean, professional appearance. As a non-handed design, the 608DT offers flexible installation without the need to specify door hand direction, making it an ideal solution for a wide range of commercial door applications.

Professional Features & Benefits

  • Narrow Profile Construction: At only 3/16" (5 mm) thick, the 608 Series trim delivers a sleek, low-profile appearance suited for modern commercial door applications.
  • Material Options: Available in brass, bronze, or stainless steel to match existing door hardware finishes and meet project aesthetic requirements.
  • Flat Pull Grip Design: Integrated flat pull grip provides a clean, functional interface for door operation without the complexity of a lever or knob trim function.
  • Non-Handed Configuration: The non-handed design eliminates the need to specify door handing, simplifying ordering and installation across a variety of door configurations.
  • 88 Series Compatibility: Engineered specifically for use with Von Duprin 88 Series Exit Devices, ensuring seamless integration and reliable performance.
  • Heavy-Duty Grade 1 Performance: Rated Grade 1 and Heavy Duty for demanding commercial environments where long-term durability and dependable operation are essential.
  • Available Function Variants: The 608 Series is available in multiple functions including 608DT (Dummy Trim), 608NL, and 608TP, providing flexibility for varied access control requirements.
  • Product Projection: Features a product projection of 2 1/6" for proper clearance and fit within compatible door and frame assemblies.

Technical Specifications

  • Subcategory: Exit Device Trim
  • Series: 88 Exit Trim
  • Grade: Grade 1
  • Duty Level: Heavy Duty
  • Compatibilty: 88 Series Exit Devices
  • Product Group: Exit Devices and Trim
  • Product Subgroup: Exit Device Trim
  • Product Type: Exit Device Trim
  • Commercial/Residential: Commercial
  • Product Model: 608DT
  • Product Function: Dummy Trim
  • Door Hand Direction: Non-Handed
  • Product Projection: 2 1/6"
  • Product Category: Exit Devices and Trim
  • Department: Door Hardware

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Von Duprin Quality?

Von Duprin exit device trim products deliver professional-grade reliability with heavy-duty, Grade 1 rated construction in brass, bronze, or stainless steel, engineered to perform in the most demanding commercial environments. The 608DT's narrow 3/16" (5 mm) profile and non-handed design reflect Von Duprin's commitment to versatile, installer-friendly hardware solutions. Engineered for demanding commercial applications where dependable performance and long-term durability are essential.

Manufacturer Resources

Von Duprin 88 Series Catalog

Product Specs

Subcategory:
Exit Device Trim
Series:
88 Exit Trim
Grade:
Grade 1
Duty Level:
Heavy Duty
Compatibility:
88 Series Exit Devices
Product Group:
Exit Devices and Trim
Product Subgroup:
Exit Device Trim
Product Type:
Exit Device Trims
Commercial/Residential:
Commercial
Product Model:
608DT
Product Function:
Dummy Trim
Door Hand Direction:
Non-Handed
Product Projection:
2 1/6"
Product Category:
Exit Devices and Trim
Department:
Door Hardware

Von Duprin 608DT 26D – Frequently Asked Questions

1) What does the Von Duprin 608DT dummy trim actually do on the outside of a door?
Dummy trim means no latch retraction. The 608DT is a fixed flat pull grip on the outside face of the door, so it gives someone a place to grab and pull, but it will not release the exit device latch. Egress happens from the inside, by pushing the 88 Series device. Use it on doors that are exit only from the outside, or on the inactive leaf of a pair. If you need the outside pull to retract the latch with a key, a dummy trim is the wrong function.
2) Do I have to specify left hand or right hand when ordering the 608DT?
No handing to specify. The 608DT is non-handed, so one part number covers left and right hand doors, and inswing or outswing. For a property manager buying trim for several openings at once, that means a single line item covers all of them and there is no risk of a wrong-hand return.
3) I need keyed access from the outside, not just a pull. What do I order instead of the 608DT?
Not the 608DT. A dummy pull gives you no key access at all. Within the Von Duprin 608 trim family the other functions are the 608NL and the 608TP, both of which cover access requirements a plain dummy pull does not. If the door needs a keyed lever rather than a pull, the trim has to match the device series you already have on the door, so identify the device first and match the trim to it.
4) What is the equivalent of a Von Duprin 608DT dummy trim in another brand?
The 608DT is a dummy trim with a flat pull grip, meaning it pulls the door but does not operate the exit device latch. The closest cross-brand match is the Dexter ED1500 Series dummy function exit device trim with handle pull plate, which is also a dummy function pull for the ED1500 Series. Detex also builds the 02BN dummy S-lever trim with blank escutcheon for its Value Series devices, which is a dummy function in lever form rather than a pull grip. All three are pull-only trims, but each mounts to its own manufacturer's device: the 608DT is built for Von Duprin 88 Series exit devices.
5) I need the outside trim to retract the latch with a key, not just pull the door. What should I use instead of a dummy trim?
A dummy trim like the 608DT is a pull only; it has no cylinder and no latch retraction. For keyed outside access you want a nightlatch trim. The Sargent 704ET is a Grade 1 heavy duty night latch lever trim with field reversible operation, and the Sargent 704-ETL is a Grade 1 heavy duty nightlatch lever trim with key retract function for PE Series devices. Corbin Russwin builds the VT957ET nightlatch escutcheon trim in stamped or formed stainless steel for ED5000 Series devices, and Dexter offers an ED1500 Series nightlatch trim with raised lip pull plate for those who want the pull form factor with key function.
6) Is a passage exit trim the same thing as a dummy trim?
No, and this is the substitution that goes wrong most often. A dummy trim such as the 608DT is fixed; the pull grip does not move and does not retract the latch, so the door is exit only from the outside. A passage trim has a working lever that retracts the latch whenever the device is not dogged. Passage examples include the Arrow SRX01 Sierra lever with rose for ED910, S1150 and S1250 devices, the Corbin Russwin 3310AET for ED300 Series, the x810ET for ED4000 Series, and the x910ET heavy duty trim for ED5200S, ED5200, ED5400 and ED5800 Series. If the opening needs free entry from outside, a passage trim is the correct part; if outside entry must be blocked, the dummy is.
7) The door needs to stay locked outside but open with a key for staff. Dummy trim or storeroom trim?
Storeroom, if staff need to get in. The 608DT dummy pull gives no outside entry at all. Storeroom function trims keep the lever rigid until a key turns it: the Design Hardware KIL storeroom trim is Grade 1 with a Schlage C keyway and flat lever for 1000 and 2000 Series devices, the Pamex E9000 is a Grade 1 storeroom L3 lever heavy duty trim covering 1-3/8 inch to 2 inch doors, the Tell EDELT80 is a storeroom escutcheon lever trim for 1-3/8 inch to 1-3/4 inch doors, and Marks USA offers the M195F storeroom lever and rose trim with spring loaded roses for M9900 touchbar devices. Choose the dummy only when the outside face should never admit anyone.
8) Does the 608DT accept a cylinder, or do I need a pull trim with a cylinder hole?
The 608DT is a dummy flat pull grip with no cylinder function. If the outside pull must also take a key cylinder, the pull trims prepped for one are the correct part: the Design Hardware 2P-03NL pull trim with cylinder hole, night latch function, for 1000R and 2000R exit devices, and the Tell exit device pull trim with cylinder hole supplied less cylinder for 1-3/8 inch to 1-3/4 inch doors. Both keep the pull form factor the 608DT has while adding key retraction of the latch.
9) How far does the Von Duprin 608 pull trim stick out from the door face?
Projection is 2 1/6 inches off the door face, and the trim plate itself is a narrow 3/16 inch (5 mm) thick. That matters on openings with a tight pocket: a door in a recessed frame, one that swings past an adjacent wall or a return, or a pair where the leaves pass close together. Check the projection against your clear swing before you commit, particularly on vestibules and stair towers.
10) Is the 608DT heavy duty enough for a school or hospital entrance?
Grade 1 and heavy duty, rated for commercial service. That is the top ANSI/BHMA durability tier used on institutional openings, which is why the 608 trim shows up on school corridors, healthcare facilities, government buildings, and multi-tenant residential. Since it is a dummy pull with no moving latch mechanism, there is nothing internal to wear out under traffic; the wear points are the fasteners and the finish.
11) Does putting a dummy trim on the outside affect free egress from the inside?
No. The 608DT sits on the outside face only. The Von Duprin 88 Series device on the inside still releases the latch with a single push, so egress is unaffected by which trim function you hang outside. That is the whole point of running dummy trim on a stair discharge or a rear service door: nobody gets in, everybody gets out.
12) What is the difference between a dummy pull trim and a classroom function exit trim?
A classroom trim takes a key on the outside to lock or unlock the lever, so the room can be secured or left open as conditions change. The 608DT dummy pull has no such control; the outside face never operates the latch. Classroom options include the Falcon 510L heavy duty lever trim for 24 and 25 Series devices, the Falcon 179L for 1790 Series in medium duty, the Accentra 446F Grade 1 Augusta lever classroom trim, and the Dexter ED1000T classroom trim in thumbpiece and pull plate form with a cylinder, supplied less cylinder. For a school corridor the classroom function is usually what the spec calls for; the dummy suits an exit only leaf.
13) Can I put a dummy trim on the door and add access control later, or should I plan for electrified trim now?
The 608DT is a mechanical dummy pull with no electrical provision, so an access control conversion means replacing the trim. If the opening is likely to be credentialed, an electrified trim from the start avoids the second visit. Command Access builds the ET15, ET25 and ET26 electrified exit trims with 12V and 24V operation and fail safe or fail secure options, the ET26 with Grade 1 construction and a field reversible design, and the 230L to electrify Von Duprin 230L trim on V96, 36 and 23 Series devices. Dormakaba takes the standalone route with the E-Plex 201U electronic pushbutton exit trim and the PowerPlex P201U for rim, mortise and SVR devices, which need no wiring run to the door.
14) Is a Falcon or Accentra exit trim interchangeable with Von Duprin 88 Series trim?
Trim is matched to the device family it mounts on, not swapped freely across brands. The 608DT is built for Von Duprin 88 Series exit devices. Falcon trims list their own device families, the 179L for 1790 Series, the 212L for 20 Series and the 510L for 24 and 25 Series. Accentra lists the 426F Augusta lever escutcheon trim for 6000 and 1800 Series devices. If the device on the door is an 88 Series, the 608DT is the trim that matches it; if the device is being replaced too, then the trim and device are chosen as a pair from the same family.
15) Which exit device trims are Grade 1 heavy duty like the Von Duprin 608DT?
The 608DT is Grade 1 and heavy duty. Among cross-brand trims, the Sargent 704ET and 704-ETL are both Grade 1 heavy duty night latch lever trims, the Falcon 510L is a heavy duty classroom function trim for 24 and 25 Series devices, and the Pamex E9000 is a Grade 1 heavy duty storeroom L3 lever trim. Sargent also lists the 744 as a Grade 1 freewheeling night latch trim for 8700 and 8900 Series surface vertical rod and mortise devices. Falcon's 179L and 212L are medium duty, which is the distinction to watch for a high traffic opening.
16) I want a lever on the outside instead of a flat pull. What are my options?
The 608DT uses a flat pull grip rather than a lever. If the opening calls for a lever, the choice depends on what the lever should do. For a fixed lever that does not operate the latch, Detex builds the 02BN dummy S-lever trim with blank escutcheon for Value Series devices, and Falcon lists the 212L as a blank escutcheon lever trim for 20 Series devices in medium duty. For a working lever, Delaney offers the 500L in CT, MD and SD lever styles in entrance function, and Marks USA lists the M195N lever and rose trim. Levers also help where an ADA compliant operable shape is wanted rather than a grip.
17) What finishes does the Von Duprin 608DT dummy trim come in?
Eleven finishes, and they cover both matching an existing building standard and a designed look: 605 bright brass, 606 satin brass, 612 satin bronze, 613 oil rubbed bronze, 619 satin nickel, 622 matte black, 625 bright chrome, 626 satin chrome, 629/US32 bright stainless steel, 643E aged bronze, and 693/SPBLK black painted. For a facility standardizing on one look, 626 satin chrome and 630-family stainless tones are the usual commercial baseline; 613 and 643E are the ones people pick to match existing bronze door hardware. The trim body itself is brass, bronze, or stainless steel.
How fast can I get the Von Duprin 608DT 26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Von Duprin 608DT 26D come with a warranty?
Absolutely. The Von Duprin 608DT 26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Von Duprin 608DT 26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Von Duprin 608DT 26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!