WAC Lighting R4FSA FQ 4in Squa...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$116.95

WAC Lighting R4FSA FQ 4in Square Adjustable LED Trim with Light Engine, 90 CRI

(No reviews yet) Write a Review

Model: R4FSAL-927-BK
From the FQ Collection
$116.95

In Stock (leaves warehouse same day if ordered before 3pm ET)

$116.95
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

WAC Lighting R4FSA FQ 4in Square Adjustable LED Trim with Light Engine, 90 CRI

The WAC Lighting R4FSA is a 4in square adjustable trim from the FQ Recessed series, built with an integrated LED light engine mounted on the trim with springs for easy replacement. Two-piece die-cast aluminum construction supports 0-45° vertical tilting and 365° horizontal rotation with center beam alignment retained throughout the adjustment range, plus 30° shielding for superior glare control. Rated 90 CRI with 120-240-277 voltage, the R4FSA is ETL & cETL rated for damp locations and Energy Star, Title 24, and Title 20 compliant.

Key Features

  • Trade Size: 4in square trim profile designed for the FQ Recessed housing series.
  • Durable Construction: Two-piece die-cast aluminum housing for long-term durability and precise fit.
  • Adjustable Aiming: 0-45° vertical tilting and 365° horizontal rotation with center beam alignment retained throughout the adjustment range.
  • Glare Control: 30° shielding for superlative glare control and uniform floor-to-ceiling wall washing.
  • Light Engine: LED module mounted on the trim with springs for easy replacement; universal driver compatible.
  • Light Quality: 90 CRI for accurate color rendering, rated for an average of 50000 hours.
  • Dimming: Compatible with 0-10V, ELV, and TRIAC dimming controls for hardwired installations.
  • Operating Range: Rated for operation from -4°F to 104°F (-20°C to 40°C).

Certifications & Compliance

  • ETL & cETL Rated for Damp Locations
  • Energy Star Certified
  • Title 24 Compliant
  • Title 20 Compliant

Technical Specifications

  • Bulb Base: LED Module - Universal Driver
  • Bulb Shape: LED Module
  • Bulbs Included: Yes
  • Collection: FQ
  • Dimmable: 0-10V;ELV;TRIAC
  • Hardwired or Portable: Hardwired
  • Product Type: Recessed Trims
  • Safety Rating: ETL;cETL
  • Warranty: 5 Years Functional, 2 Years Finish
  • Subcategory: 4" LED
  • Avg Rated Hours: 50000
  • CRI: 90
  • Voltage: 120-240-277
  • Material: Die-cast Aluminum
  • Country of Origin: China
  • Style: Modern; Transitional

Typical Applications

  • Residential and Commercial Recessed Lighting
  • Accent and Wall-Wash Lighting
  • Retail and Hospitality Lighting Design
  • New Construction and Remodel Installations
  • Damp-Location Recessed Fixtures

Why WAC Lighting?

WAC Lighting engineers the FQ Recessed series with two-piece die-cast aluminum construction and a spring-mounted light engine for easy servicing and replacement. Backed by a 5-year functional and 2-year finish warranty, the R4FSA delivers reliable, code-compliant performance with ETL, cETL, and Energy Star recognition for professional lighting installations.

Product Specs

Bulb Base:
LED Module - Universal Driver
Bulb Shape:
LED Module
Bulbs Included:
Yes
Collection:
FQ
Dimmable:
0-10V;ELV;TRIAC
Hardwired or Portable:
Hardwired
Product Type:
Recessed Trims
Safety Rating:
ETL;cETL
Subcategory:
4" LED
Avg Rated Hours:
50000
CRI:
90
Product Voltage:
120-240-277
Product Material:
Die-cast Aluminum
Location Rating:
Damp
Product Style:
Modern; Transitional

WAC Lighting R4FSAL-927-BK – Frequently Asked Questions

1) Does the WAC Lighting R4FSA 4in square trim come with the LED light engine, or do I need to order that separately?
The light engine ships with the R4FSA trim. The LED module is mounted to the trim on springs, so it can be pulled and replaced later without taking the trim out of the ceiling. It runs off a universal driver, so you are ordering the trim plus engine as one assembly and pairing it with the FQ recessed housing.
2) What housing does the R4FSA square trim fit?
It is built for the WAC Lighting FQ Recessed housing series in the 4 inch square size. The trim is part of the FQ collection, so pair it with an FQ 4in housing; it is not a universal retrofit trim for other manufacturers' cans.
3) Can I use this square adjustable trim in a bathroom or covered exterior soffit?
Damp locations are covered. The R4FSA is ETL and cETL rated for damp use, which takes care of enclosed showers outside the spray zone, bathrooms generally, and covered porches or soffits. It is not rated wet, so do not use it where it will see direct water. Operating range is -4F to 104F.
4) How far does the WAC R4FSA aim, and can I use it to wall wash?
Aiming runs 0 to 45 degrees of vertical tilt and 365 degrees of horizontal rotation, and center beam alignment is held through the whole adjustment range so the square aperture stays square to the ceiling as you aim. With 30 degree shielding it is a reasonable choice for floor-to-ceiling wall washing and accent work without dumping glare into sightlines.
5) Will the R4FSA work on a 277V commercial circuit?
Yes. Voltage is 120-240-277, so the same trim and light engine run on residential 120V, 240V, or a 277V commercial branch circuit. It is a hardwired fixture, not a plug-in, so it needs to be wired to the FQ housing and driver.
6) What dimmers work with the WAC FQ R4FSA LED trim?
It accepts 0-10V, ELV, and TRIAC dimming. On a commercial job that usually means 0-10V tied to the building control system; on residential remodels an ELV or TRIAC wall dimmer is the simpler route. Standard incandescent-only dimmers are not on the list, so match the dimmer to one of those three protocols.
7) What color temperatures and finishes does the R4FSA square trim come in?
Color temperature choices are 2700K, 3000K, 3500K, 4000K, and a 3000-1800K warm-dim option that drops toward candlelight as you dim. Finishes are Black, Dark Bronze, Haze, and White, plus a Haze/White two-tone on certain builds. If you are standardizing a building, pick one CCT and one finish and carry it across every opening.
8) Is the R4FSA good enough color quality for retail and hospitality spec work?
Rated 90 CRI, which is the usual floor for retail merchandising, gallery, and hospitality spec work where skin tones and fabric color have to read correctly. Average rated life is 50,000 hours, and the module is field-replaceable on its spring mounts if a unit fails in a ceiling you do not want to tear apart.
9) Does the WAC R4FSA meet California Title 24 for a new build?
It is listed as Title 24 and Title 20 compliant and Energy Star certified, which is what a California permit set is looking for on recessed fixtures. It also carries ETL and cETL marks, so it clears inspection on both US and Canadian jobs.
10) Square trim or round trim for a recessed job like this?
The R4FSA is a 4 inch square aperture, which is the choice when the ceiling detail is modern and you want the aperture to read as an architectural cut rather than a downlight hole. Round trims blend into older or transitional ceilings with less visual weight. Once you commit to square, every opening on that ceiling run should be square, since mixing the two in one field is the most common thing that gets flagged on walkthrough.
11) Will a painted white trim hold up in a high-humidity bathroom ceiling?
The trim body is two-piece die-cast aluminum rather than steel or plastic, so it is dimensionally stable and will not rust out in a damp bathroom ceiling. White, Black, Dark Bronze, and Haze finishes are all on the same aluminum casting.
How fast can I get the WAC Lighting R4FSAL-927-BK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting R4FSAL-927-BK come with a warranty?
Absolutely. The WAC Lighting R4FSAL-927-BK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting R4FSAL-927-BK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting R4FSAL-927-BK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.