WAC Lighting T24-OD-IC Joiner ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.00
$6.95
WAC Lighting T24-OD-IC Joiner Cable InvisiLED Outdoor Pro+ / RGBWW / 12V Landscape

WAC Lighting T24-OD-IC Joiner Cable InvisiLED Outdoor Pro+ / RGBWW / 12V Landscape

(No reviews yet) Write a Review

Model: T24-OD-IC6-WT
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.00
$6.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Modern Forms PD-72322 Illusion LED Pendant

Perfect in design and function. Oval shaped, etched opal glass provides beautiful and consistent illumination from integral LEDs concealed within.
  • Featuring decorative metal worked frame with aluminum construction and blown etched opal glass shade.
  • Slope ceiling adaptable. Hang straight swivel with 1x6 and 3x12in extension rods included (additional sold separately).
  • Universal Input Voltage Driver (120V-240V-277V) inside fixture, can fit on a pancake junction box. Adjustable CCT in the canopy.
  • Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer.
  • High Powered Replaceable LED Module CRI: 90, Rated Hours: 50,000, Color Temp: 2700K/3000K/3500K
  • Standards: ETL & cETL UL 1598 listed for Damp Locations. CEC Title 24 Compliant.

Manufacturer Resources

Product Specs

Segment:
Lighting

WAC Lighting T24-OD-IC6-WT – Frequently Asked Questions

1) What lengths does the WAC Lighting T24-OD-IC joiner cable come in?
The T24-OD-IC joiner cable is offered in four lengths: 6 inch (T24-OD-IC6-WT), 12 inch (T24-OD-IC12-WT), 72 inch (T24-OD-IC72-WT), and 120 inch (T24-OD-IC120-WT). Short runs cover a gap between two adjacent tape sections around a corner or across a mounting break; the 72 and 120 inch cables carry the run from one lighted area to the next, such as tread to tread or between separated fascia sections, without adding tape you would have to hide.
2) Will the T24-OD-IC joiner cable work with WAC InvisiLED Outdoor Pro+ RGBWW tape light?
That is exactly what it is built for. The T24-OD-IC is the joiner cable for the WAC Lighting InvisiLED Outdoor Pro+ RGBWW 12V landscape system, so it mates with that outdoor RGBWW tape and its 12 volt low voltage supply. It is an accessory cable, not a light source and not a driver, so you still order the tape, the outdoor 12V power supply, and any mounting channel separately.
3) Do I need a multi-conductor cable to keep RGBWW color control across a gap in the run?
Yes, and that is the point of using the matching joiner rather than a generic two wire jumper. RGBWW tape carries separate red, green, blue and warm white channels plus the common, so every one of those conductors has to continue past the gap or the second section loses color control. The T24-OD-IC is the WAC joiner made for the InvisiLED Outdoor Pro+ RGBWW 12V system, so it carries the run through intact.
4) Can I use one of these joiner cables to jump InvisiLED tape around an outside corner on a landscape wall?
That is a standard use for it. Rather than bending tape around the corner, you end the run, use a T24-OD-IC joiner to bridge the corner, and restart the tape on the next face. The 6 inch is usually enough for a tight corner or a joint between two channel sections; step up to 12 inch where the cable has to route behind a return or a post.
5) Which length joiner cable should I order for stair or step lighting on a deck?
For riser to riser jumps on a typical deck stair, the 6 inch or 12 inch joiner covers the gap between adjacent treads. Where the run has to skip a landing, cross a stringer, or reach a separate section of fascia, the 72 inch and 120 inch cables carry it without splicing in extra tape. Measure the actual cable path including the drop behind the framing, not the straight line between fixtures, since the cable has to be routed rather than stretched.
6) What color is the WAC T24-OD-IC joiner cable, and will it show on a light colored soffit?
White is the only finish the joiner cable is built in, across all four lengths. On a white or light soffit, fascia, or stair riser it disappears reasonably well when run tight to the surface; on dark stone or bronze trim, plan to route it inside the channel, behind the fascia, or under the tread nosing rather than expecting the cable itself to blend.
How fast can I get the WAC Lighting T24-OD-IC6-WT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting T24-OD-IC6-WT come with a warranty?
Absolutely. The WAC Lighting T24-OD-IC6-WT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting T24-OD-IC6-WT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting T24-OD-IC6-WT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!