You may also like
Washers 1/2 X 1-3/8 Fender SS (Jar 100)
Special Features
- Features: A Larger Diameter for Greater Bearing Surface
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Inside Diameter:
- 2-Jan IN
- Outside Diameter:
- 1/3/2008 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Fender Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 4.57 in
- Product Material:
- Stainless Steel
- Product Weight:
- 3.1 lbs
- Product Width:
- 3 in
Metallics JW120SS – Frequently Asked Questions
1) Will the Metallics JW120SS fender washer fit a 1/2 inch bolt?
Yes. The JW120SS is a 1/2 inch by 1-3/8 inch fender washer, so the hole takes a 1/2 inch bolt or threaded rod and the 1-3/8 inch outside diameter spreads the load well past the head or nut.
2) Why use a fender washer instead of a standard flat washer on 1/2 inch rod?
A fender washer has a much larger outside diameter relative to its hole, which is the whole point of the JW120SS: at 1-3/8 inches across on a 1/2 inch hole it gives a greater bearing surface. That matters when you are anchoring into drywall, sheet metal, plywood, or any soft or oversized-hole substrate where a standard flat washer would pull through. For bolted steel-to-steel connections a standard flat washer is usually the right call.
3) Are these washers stainless steel, and can they be used outdoors or in damp areas?
The JW120SS is stainless steel, so it holds up in wet and washdown locations and in exterior work far better than a plain or zinc-plated washer. Pair it with stainless fasteners to avoid mixing dissimilar metals at the joint.
4) How many Metallics JW120SS washers come in a jar?
They ship 100 to a jar. The jar is the pack unit, which is how most electrical and mechanical contractors buy these for truck stock, and the filled jar weighs 3.1 lbs.
5) What trades use a 1/2 inch stainless fender washer like this?
Metallics lists the JW120SS for the electrical, plumbing, heating and air conditioning industries. Typical uses are strut and threaded rod hangers, equipment mounting, panel and enclosure fastening, and anywhere an oversized or slotted hole needs covering on a 1/2 inch bolt.
How fast can I get the Metallics JW120SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JW120SS come with a warranty?
Absolutely. The Metallics JW120SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JW120SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JW120SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.