You may also like
Washers 1/4 Ext Tooth Lock St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Country Of Origin:
- MUL
- Division:
- Electrical H1
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Pack Type:
- Jar
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- External Tooth Lock Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 2.15 in
- Product Material:
- Steel
- Product Weight:
- 0.13 lbs
- Product Width:
- 3 in
Metallics JLWX6 – Frequently Asked Questions
1) What size bolt or screw does the Metallics JLWX6 external tooth lock washer fit?
The JLWX6 is a 1/4 inch external tooth lock washer, so it goes over a 1/4 inch bolt, screw or stud. Anything larger will not pass through the inner opening, and on a smaller #10 or #8 screw the washer will sit loose and the teeth will not bite evenly under the head.
2) What is the difference between an external tooth lock washer and an internal tooth or split lock washer?
An external tooth washer, which is what the JLWX6 is, has its teeth around the outer edge, so it bites over a wider circle and resists loosening under vibration better than an internal tooth style. Internal tooth washers hide the teeth under the fastener head, which looks cleaner and is used where the head is large enough to cover them. A split lock washer relies on a single spring gap rather than teeth. For grounding and bonding work, where you want the teeth to cut through paint or zinc plating to make metal to metal contact, the external tooth style is the one usually specified.
3) Are these Metallics 1/4 inch lock washers suitable for outdoor or damp locations?
They are steel with a zinc plating, which handles normal indoor panel work, conduit strut and mechanical rooms. Zinc plated steel gives light corrosion protection only, so for wet, coastal or chemically aggressive locations a stainless washer is the better call.
4) How many washers come in a jar of Metallics JLWX6?
Each jar holds 100 of the 1/4 inch external tooth lock washers. The jar packaging is what makes it practical on a service truck or a shop bench, you pour out what you need and the lid keeps the rest from scattering through a bin.
5) When I order the Metallics JLWX6 washer, is there any option I need to specify?
No. JLWX6 is a single part number covering the 1/4 inch external tooth lock washer in zinc plated steel, sold by the jar of 100. There is no finish, size or pack choice to make.
6) How much does a jar of 100 Metallics JLWX6 washers weigh and how big is the container?
The packed jar weighs 0.13 lbs and measures 3 x 3 x 2.15 inches, small enough to drop into a tool bag or a van drawer without taking a shelf slot.
How fast can I get the Metallics JLWX6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JLWX6 come with a warranty?
Absolutely. The Metallics JLWX6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JLWX6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JLWX6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.