You may also like
Washers 1/4 X 1-1/2 Fender St-zn (Box 1000)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 7.25 in
- Product Height:
- 6 in
- Product Material:
- Steel Zinc
- Product Weight:
- 29.58 lbs
- Product Width:
- 6.25 in
Metallics W114M – Frequently Asked Questions
1) What size bolt does the Metallics W114M fender washer fit?
The W114M is a 1/4 inch fender washer, so it goes over 1/4-20 bolts, 1/4 inch lags, or 1/4 inch threaded rod. The 1-1/2 inch outside diameter gives you a large bearing surface around that 1/4 inch hole, which is the point of a fender washer: spreading load over soft or oversized material instead of letting the bolt head pull through.
2) Are Metallics W114M washers zinc plated, and can they be used outdoors?
They are zinc plated steel. Zinc plating handles indoor, damp, and sheltered exterior conditions, but it is not the same as hot dip galvanizing or stainless. For direct weather exposure, coastal air, or anything in standing water, step up to a hot dip galvanized or 304 stainless fender washer.
3) Can I use a fender washer instead of a flat washer under a 1/4 inch bolt in strut or unistrut work?
Use the fender washer when the material under the head is soft, thin, slotted, or oversized. A standard 1/4 inch SAE flat washer has a much smaller outside diameter and is fine on solid steel with a matching hole. The W114M's 1-1/2 inch outside diameter is what you want against sheet metal, slotted channel, plywood backing, or a hole that has been drilled out. It is a load-spreading washer, not a hardened washer, so do not use it as a structural bearing washer under high-torque assemblies.
4) How many washers come in a box of Metallics W114M, and how much does the box weigh?
It ships as a box of 1,000 pieces, and the box runs 29.58 lbs. That is a contractor-quantity pack for strut hanging, panel mounting, or repeat trim-out work, not a handful for a single repair.
5) What are the carton dimensions on the Metallics W114M box of 1000?
The pack measures 7.25 x 6.25 x 6 inches and weighs 29.58 lbs, so it stores on a van shelf or in a job box without repacking.
How fast can I get the Metallics W114M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics W114M come with a warranty?
Absolutely. The Metallics W114M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics W114M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics W114M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.