You may also like
Washers 1/4 x 1-1/4 Fender St-zn (Box 2300)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Fender Washers
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 9 in
- Product Height:
- 6.13 in
- Product Material:
- Steel Zinc
- Product Weight:
- 46.54 lbs
- Product Width:
- 9 in
Metallics W116B – Frequently Asked Questions
1) What size bolt does the Metallics W116B fender washer fit?
The W116B is a 1/4 inch fender washer, so it goes over a 1/4-20 bolt or threaded rod, with a 1-1/4 inch outside diameter. That wide OD is the point: it spreads load across sheet metal, drywall, panel, or an oversized hole where a standard 1/4 inch flat washer would pull straight through.
2) Should I use a fender washer or a standard flat washer for mounting electrical boxes to thin panel?
Use the fender. A standard 1/4 inch flat washer has an OD only slightly larger than the bolt head, so on thin sheet, drywall, or a slotted or oversized hole it concentrates load and lets the fastener dish or pull through. The W116B's 1-1/4 inch OD spreads that load over five times the bolt diameter. On solid steel strut or structural plate with a clean hole, a standard flat washer is the normal choice and seats more compactly under the nut.
3) Are Metallics W116B fender washers plated for corrosion resistance?
They are zinc plated steel. That handles normal interior electrical and MRO work, damp-rated indoor areas, and protected exterior locations. For direct weather exposure, coastal sites, or anywhere washed down with chemicals, step up to stainless instead.
4) How many fender washers come in a box of Metallics W116B?
They ship 2,300 per box, as a bulk box rather than a small retail pack. That quantity suits a crew doing repetitive strut, panel, or sheet metal mounting across a job or a stockroom bin, not a one-off repair.
5) How much does a box of 2,300 Metallics W116B fender washers weigh and how big is the carton?
The box weighs 46.54 lbs and measures 9 x 9 x 6.13 inches. Worth knowing if you are planning shelf space in a stockroom or hand-carrying it up a ladder deck, since that is a dense carton for its footprint.
6) What is the Metallics part number for a 1/4 x 1-1/4 zinc fender washer?
Metallics W116B. Order by that MPN to get the 1/4 inch bore, 1-1/4 inch outside diameter zinc plated steel fender washer in the 2,300 piece box.
How fast can I get the Metallics W116B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics W116B come with a warranty?
Absolutely. The Metallics W116B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics W116B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics W116B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.