You may also like
Washers 5/8 Split Lock SS (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Country Of Origin:
- MUL
- Division:
- Electrical H1
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Fits Bolt Size:
- 8-May IN
- Inside Diameter:
- 8-May IN
- Pack Type:
- Jar
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Split Lock
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 3.6 in
- Product Material:
- Stainless Steel
- Product Weight:
- 3.32 lbs
- Product Width:
- 3 in
Metallics JSLW92 – Frequently Asked Questions
1) Are these 5/8 lock washers stainless steel, and will they hold up outdoors?
Stainless steel. That's the reason to pick the JSLW92 over a plain or zinc plated split lock on wet locations, exterior strut runs, rooftop mechanical mounts, or anywhere washdown and salt would rust a plated washer out. Keep the whole joint stainless where you can, bolt, nut and washer, so you aren't mixing metals at the connection.
2) Should I use a split lock washer or a flat washer under a 5/8 nut?
They do two different jobs. A split lock washer like the JSLW92 is a helical ring that spring loads the joint and resists the nut backing off under vibration, which is why it's specified on motor mounts, strut and equipment anchoring. A flat washer only spreads the load over a wider bearing area and does nothing about loosening. On soft or oversized material, contractors often run both: flat washer against the surface, split lock between it and the nut.
3) Are Metallics 5/8 stainless split lock washers meant for electrical work only?
No. The JSLW92 is catalogued for the electrical, plumbing, heating and air conditioning trades, so the same jar covers conduit and strut hardware, pipe hanger rod, and HVAC equipment mounting. It's a general purpose 5/8 fastening washer, not an electrical-specific part.
4) What are the jar dimensions on the Metallics JSLW92 washers for shelf or van storage?
The jar measures 3 x 3 x 3.6 inches and weighs 3.32 lbs, so it fits a standard small parts bin or drawer without repackaging. Useful if you're standardizing a stockroom on jarred fastener counts.
How fast can I get the Metallics JSLW92 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSLW92 come with a warranty?
Absolutely. The Metallics JSLW92 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSLW92?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSLW92 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.