You may also like
Washers #6 Finishing St-Ni (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Fits Bolt Size:
- 8-Jan IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Finishing Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Finish:
- Nickel Plated
- Product Length:
- 3 in
- Product Height:
- 2.15 in
- Product Material:
- Steel
- Product Weight:
- 0.11 lbs
- Product Width:
- 3 in
Metallics JCW10 – Frequently Asked Questions
1) What screw size do the Metallics JCW10 finishing washers fit?
They are sized for #6 screws. If you are fastening with #8 or #10 oval-head screws, a #6 finishing washer will not let the head seat correctly, so step up to the matching size for that screw.
2) What is a finishing washer for, and when would I use one instead of a flat washer?
A finishing washer is the cupped, countersunk washer that sits under an oval-head or flat-head screw so the screw head nests flush into the washer instead of standing proud of the surface. The Metallics JCW10 is a #6 finishing washer in nickel plated steel, so it gives a clean exposed-fastener look on cover plates, trim, device plates and panel work. A plain flat washer just spreads load under a round or hex head; it will not seat a tapered screw head or dress the hole.
3) Will nickel plated steel finishing washers hold up outdoors or in a damp location?
The JCW10 is plain steel with a nickel plating, which is a decorative and mildly corrosion resistant finish meant for dry interior work such as device plates and interior trim. For wet, exterior or washdown locations, specify a stainless steel finishing washer instead; plated carbon steel will eventually rust through at the plating once it is scratched by the screwdriver.
4) How many washers come in a jar of Metallics JCW10?
Each jar holds 100 washers, packaged in a jar rather than a bag or box, which is what keeps them from scattering in a van drawer or on a service cart. Total shipping weight for the jar is 0.11 lbs.
5) Are these electrical-trade washers only, or can plumbing and HVAC crews use them too?
Metallics lists the JCW10 for the electrical, plumbing, heating and air conditioning trades, so the same jar works for panel covers, equipment trim and duct or appliance panel screws. It is a general finishing washer, not an electrical-only part.
6) What is the Metallics part number to order these #6 finishing washers by?
Order by manufacturer part number JCW10 from Metallics. That number covers the #6 nickel plated steel finishing washer supplied 100 to a jar, and it is the single configuration offered, so there are no finish or pack options to specify.
How fast can I get the Metallics JCW10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JCW10 come with a warranty?
Absolutely. The Metallics JCW10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JCW10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JCW10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.