You may also like
Washers 6 Flat SS (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Country Of Origin:
- China
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 2.15 in
- Product Material:
- Stainless Steel
- Product Weight:
- 0.1 lbs
- Product Width:
- 3 in
Metallics JSSW81 – Frequently Asked Questions
1) How many #6 flat washers come in a jar of Metallics JSSW81?
100 washers per jar. The jar pack type keeps them contained on a van shelf or in a parts bin rather than loose in a bag, which is the usual reason electricians buy this format for service trucks.
2) Are the JSSW81 washers stainless steel or plated steel?
Stainless steel throughout, not zinc-plated carbon steel. That matters for exterior enclosures, damp locations, and wash-down areas where a plated washer would rust and streak. Country of origin is China.
3) Can I use Metallics #6 stainless flat washers with stainless screws to avoid galvanic corrosion?
Yes. Because the JSSW81 washer is stainless steel, pairing it with stainless screws keeps the whole fastener stack the same family, which is what you want in a wet or coastal install. Mixing a plated steel washer under a stainless screw is where people get corrosion at the joint.
4) What do #6 flat washers actually do in a panel or device install?
A flat washer spreads the clamping load of the screw head over a wider area, so it keeps a #6 screw from pulling through sheet metal, thin plastic, or a slotted mounting hole. It also gives a cleaner bearing surface when the screw is torqued down on painted enclosure steel. It does not provide any locking action, so use a lock washer or thread locker where vibration is a concern.
5) Is the Metallics #6 flat washer a dimensionally standard washer?
The JSSW81 is built to ANSI dimensional standards, so the inside and outside diameters follow the usual #6 flat washer pattern and it interchanges with other ANSI-dimensioned #6 flats already in your hardware kit.
6) What is the part number to order Metallics #6 stainless flat washers?
Order Metallics JSSW81 for the #6 flat stainless washer in the 100-count jar. That single model number covers it, there are no finish or size options to specify.
7) What is the shipping size and weight of the Metallics JSSW81 jar?
The jar is listed at 3 x 3 x 2.15 inches and 0.1 lbs, small enough for a bin on a service truck or a drawer in a shop fastener cabinet.
How fast can I get the Metallics JSSW81 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSSW81 come with a warranty?
Absolutely. The Metallics JSSW81 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSSW81?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSSW81 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.