You may also like
Washers M10 Split Lock SS (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 2.15 in
- Product Material:
- Stainless Steel
- Product Weight:
- 0.57 lbs
- Product Width:
- 3 in
Metallics JMLW10SS – Frequently Asked Questions
1) What size bolt does the Metallics JMLW10SS split lock washer fit?
It is an M10 split lock washer, so it pairs with M10 metric bolts, screws and nuts. It will not fit imperial 3/8 inch or 7/16 inch hardware correctly, so if your fasteners are inch-series rather than metric you need a different washer.
2) Are the Metallics M10 split lock washers stainless steel or plated steel?
Stainless steel throughout, not a plated carbon steel washer. That matters where you are mounting outdoors, in damp vaults, wash-down areas or coastal sites, and it also keeps you from mixing a plated washer with stainless bolts, which is the usual cause of galling and premature corrosion at the joint.
3) How many M10 split lock washers come in a jar of Metallics JMLW10SS?
100 washers per jar, supplied in a screw-top jar rather than a loose bag. The jar is the handy count for a service van or a shop bin, since you can pour out a handful and reseal the rest.
4) What does a split lock washer actually do, and do I still need a flat washer with it?
A split lock washer sits between the nut or bolt head and the surface, and the sprung split ends bite into both when torqued, resisting loosening from vibration. It does not spread load. On soft material, sheet metal, or an oversized hole you still want a flat washer underneath, with the split lock washer stacked on top against the nut.
5) Will M10 stainless split lock washers work for strut, conduit and panel mounting?
Yes, this is a general-purpose electrical fastener washer, and M10 is the common size on metric strut hardware, panel and enclosure mounting bolts, and equipment anchor bolts. Pair it with M10 stainless bolts and nuts so the whole joint is the same metal.
How fast can I get the Metallics JMLW10SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMLW10SS come with a warranty?
Absolutely. The Metallics JMLW10SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMLW10SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMLW10SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.