You may also like
Washers M14 Split Lock Hi-Col St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Ansi:
- ANSI
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Washer Type:
- Lock Washer
- Department:
- Electrical
- Product Subgroup:
- Washers
- Product Length:
- 3 in
- Product Height:
- 2.15 in
- Product Material:
- Steel Zinc
- Product Weight:
- 0.83 lbs
- Product Width:
- 3 in
Metallics JMLWHC014 – Frequently Asked Questions
1) What bolt size do Metallics JMLWHC014 split lock washers fit?
They're M14 split lock washers, so they go under a nut or bolt head on M14 metric threaded fasteners. If your hardware is inch-series (1/2-13 or 9/16), this isn't the right washer; you'd want an inch-sized split lock washer instead.
2) Should I use a split lock washer or a flat washer under my nut?
Different jobs. The JMLWHC014 is a split (helical spring) lock washer, meant to resist a nut backing off under vibration by biting into the nut face and the mating surface. A flat washer spreads load over soft or oversized-hole material and does nothing against loosening. On vibration-prone assemblies, equipment mounts, or panel hardware, many installers use both: flat washer against the material, split lock washer under the nut.
3) Is the high-collar version of this M14 lock washer different from a regular split lock washer?
Yes. High-collar means a thicker, narrower-OD split washer. The smaller outside diameter lets it sit inside a counterbored hole or under a socket head cap screw where a standard-width lock washer would overhang, and the extra section height carries more spring load. If your bearing surface is wide open, a standard split lock washer works; if the bolt head sits in a recess or against a narrow boss, the high-collar is what fits.
4) Are these M14 lock washers zinc plated for indoor electrical work?
Material is steel with zinc plating, which is the normal finish for interior strut, panel, and enclosure fastening. Zinc gives light corrosion resistance but is not a marine or heavy outdoor coating, so for exposed wet locations look at stainless or hot-dip galvanized hardware.
5) How many washers come in a jar of Metallics JMLWHC014?
100 pieces, packed in a jar rather than a loose bag. The jar runs about 3 x 3 x 2.15 inches and the whole pack weighs 0.83 lbs, so it drops into a van bin or a parts drawer without repacking.
How fast can I get the Metallics JMLWHC014 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMLWHC014 come with a warranty?
Absolutely. The Metallics JMLWHC014 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMLWHC014?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMLWHC014 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.