You may also like
Watco C38080-BN-2H Trip Lever Bath Waste Trim Kit, Brushed Nickel, 2-Hole Configuration
Model: WAO-C38080-BN-2H
Watco C38080-BN-2H Trip Lever Bath Waste Trim Kit, Brushed NickelThe Watco C38080-BN-2H is a trip lever bath waste trim kit finished in Brushed Nickel and configured for 2-hole (2H) installation...
Watco
$54.86
Watco 38101 Trip Lever Adapter Bushing
The Watco 38101 Trip Lever Adapter Bushing is a rough-in service part used behind the tub or shower overflow plate to mate a trip lever waste-and-overflow linkage to its drain body or overflow tube. As an adapter bushing, its job is straightforward but essential for a plumber working a bath waste job: it takes up the fit difference between a trip lever assembly and the overflow opening or linkage rod it is being installed into, so the finished trip lever mechanism seats correctly, moves freely, and operates the drain stopper as intended. This is a component-level supply item, not a decorative fixture, and it is meant to be selected by a contractor or plumber who is assembling or servicing a Watco trip lever bath waste system rather than by a homeowner shopping for a finish.
Key Features
- Trip Lever Adapter Bushing: Designed specifically to interface with Watco trip lever waste and overflow assemblies during rough-in or service work.
- Fit-Up Component: Bridges the mechanical connection between the trip lever linkage and the overflow tube or drain body opening so the lever operates smoothly.
- Behind-the-Wall Service Part: Intended for installation as part of a complete bath waste and overflow assembly, not a stand-alone decorative part.
- Brand-Matched Compatibility: Manufactured by Watco for use with Watco trip lever drain and overflow systems, supporting consistent fit and function within the Watco product line.
- Replacement/Service Use: Suited for plumbers replacing or servicing an existing Watco trip lever mechanism where the original adapter bushing has worn, cracked, or gone missing.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Tub and Shower Trip Lever Waste and Overflow Assemblies
- Rough-In Bath Waste Installation
- Service and Repair of Existing Trip Lever Drain Mechanisms
- Residential and Light Commercial Bath Plumbing
Why Watco?
Watco is a recognized manufacturer of bath waste and overflow trip lever systems used throughout the plumbing trade, and the 38101 adapter bushing is built to work within that same Watco trip lever platform. Stocking the correct brand-matched adapter bushing helps a plumber complete a trip lever assembly or repair without mixing incompatible parts, keeping the finished linkage operating the way it was designed to.
Manufacturer Resources
Product Specs
- list_batch:
- WAO-20260924
- Product Type:
- Trip Lever Adapter Bushing
- Department:
- Plumbing
- Product Subgroup:
- Fittings and Valves
- Product Group:
- Rough-In and Supports
Watco 38101 – Frequently Asked Questions
1) What does the Watco 38101 trip lever adapter bushing actually do in a bath waste and overflow assembly?
The 38101 is a behind-the-wall fit-up part. It sits at the overflow and takes up the fit difference between a trip lever waste-and-overflow linkage and the drain body or overflow tube it is going into, so the lever seats square, moves freely, and throws the stopper properly. It is a component-level supply item, not a trim or finish piece, so nothing about it shows once the overflow plate is on.
2) Will the Watco 38101 bushing work with a non-Watco trip lever drain?
The 38101 is manufactured by Watco for Watco trip lever drain and overflow systems. If you are servicing another brand's waste and overflow, source the bushing for that platform instead; mixing adapter parts across brands is how a linkage ends up binding or sitting out of square.
3) My tub's trip lever got sloppy and the old plastic bushing is cracked. Is this the replacement part?
That is exactly the service case for the 38101. It is sold for plumbers replacing or servicing an existing Watco trip lever mechanism where the original adapter bushing has worn, cracked, or gone missing. Pull the overflow plate, compare the old bushing to the Watco trip lever assembly you have, and replace it rather than shimming the linkage.
4) Is the Watco 38101 a complete bath waste kit or just one piece?
Just the one piece. The 38101 is a single adapter bushing, ordered under model and part number 38101, intended for installation as part of a complete bath waste and overflow assembly. You still need the trip lever assembly, overflow tube, drain body, shoe and trim separately if you are building a rough-in from scratch.
5) Do I need the 38101 adapter bushing on a new rough-in, or only on repairs?
Either. Typical applications for the 38101 include rough-in bath waste installation as well as service and repair of existing trip lever drain mechanisms. On a new install it goes in while the wall is open, behind the overflow plate, as part of assembling the trip lever waste and overflow.
6) Can the Watco 38101 be used on a commercial job, or is it residential only?
Both, within limits. The 38101 is listed for residential and light commercial bath plumbing, which covers hotel and multi-family tub installs as well as single-family work. For heavy commercial or institutional bathing fixtures, confirm the full Watco trip lever assembly you are specifying is right for the duty before you worry about the bushing.
7) Does the Watco 38101 come in different finishes to match my overflow plate?
No finish choice applies here. The 38101 is offered as a single model and it installs behind the overflow plate where it is never seen, so the finish decision belongs to the trip lever faceplate, not the bushing.
How fast can I get the Watco 38101 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Watco 38101 come with a warranty?
Absolutely. The Watco 38101 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Watco 38101?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Watco 38101 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.