Weslock 2820 Parkside Single C...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$174.50
$91.62
Weslock Weslock 2820 Parkside Single Cylinder Handleset with Salem Knob WES-2820-S

Weslock 2820 Parkside Single Cylinder Handleset with Salem Knob

(No reviews yet) Write a Review

Model: 02820-NSNFR2D
From the Premiere Essentials Collection
$174.50
$91.62
Selected Finish is
Selected Free Keying Option is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$174.50
$91.62
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WESLOCK PARKSIDE SINGLE CYLINDER HANDLESET OVERVIEW

Premiere Essentials Hillcrest entry handle with a single cylinder deadbolt that comes with adjustable spring latch & adjustable dead bolt latch, round faceplate & round strike, round foot cap screw, and assembly screws with wood screws. Interior Round Single Cylinder Deadbolt rosette with Passage rosette with spindle attached to mounting plate, and a non-handed Hudson knob. Easy to follow instructions.

 

Standard features

  • Exceeds ANSI Grade 2 Lock Standards
  • Weslock 5-pin cylinder Keyway
  • Standard 5-1/2" center to center door prep, and adjustable 2-3/8" to 2-3/4" latches
  • Fits 1-3/8" to 2-1/4" door thickness & with a adjustable foot screw
  • Dual square spindle design
  • Limited Warranty

Manufacturer Resources

Product Specs

Product Group:
Mechanical Locks
Series:
Premiere Essentials
Warranty:
Limited 25 Year Mechanical and Limited 5 Year Finish
Collection:
Premiere Essentials
Cross Bore:
2-1/8"
Keyed:
Yes
Product Subgroup:
Bored Locksets
Product Type:
Handlesets
Subcategory:
Residential Handlesets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Cylinder and Keyways:
5 Pin Cylinder, Weslock Keyway
Lock Function:
Entry
IMAP Policy:
Yes
Backset (Distance):
2-3/8 or 2-3/4
Product Function:
Single Cylinder
Door Thickness Range:
1-3/8" to 2"
Product Design:
Round Rose
Product Dimension:
16.98" x 2-7/8" with 2-1/2" Projection Handleset Exterior and 2-5/8" Diameter Rose with 2-5/8" Projection Interior
Door Strike:
Round Corner Strike
Product Category:
Mechanical Locks
Product Substrate:
Zinc Alloy
Department:
Door Hardware

Weslock 02820-NSNFR2D – Frequently Asked Questions

1) Will the Weslock 2820 Parkside handleset fit my existing door prep?
The 2820 Parkside uses the standard 5-1/2 inch center-to-center prep between the deadbolt bore and the knob bore, with a 2-1/8 inch cross bore. If your door was previously drilled for a standard residential handleset, it drops straight in. The latches adjust between 2-3/8 and 2-3/4 inch backset, so you do not need to know which backset your door was bored for before ordering.
2) Does the Weslock 2820 handleset need to be ordered left or right handed?
No handing to specify. The Salem knob trim is non-handed and the dual square spindle design lets it serve either swing, so one part number covers a left or right hand door. Order by finish and keying only.
3) What comes in the box with the Weslock Parkside handleset, and do I need to buy a deadbolt separately?
The deadbolt is part of the handleset. You get the exterior handle with a single cylinder deadbolt, an adjustable spring latch and an adjustable deadbolt latch, round faceplate and round corner strike, the round foot cap screw, and assembly and wood screws. Interior side is a deadbolt thumbturn rosette plus a passage rosette with the spindle already on the mounting plate and the knob. Nothing else to order to hang it on a prepped door.
4) Can I get several Weslock 2820 handlesets keyed alike for one building?
Yes. Keying is chosen at order time as either keyed different or keyed alike, and there is a key code field if you need them cut to a code you already carry. The cylinder is a Weslock 5-pin in the Weslock keyway, so keying alike works across Weslock cylinders, not across a Kwikset or Schlage keyway you may have elsewhere on the property.
5) Can I replace a Schlage or Kwikset handleset with the Weslock 2820 Parkside?
Mechanically the 2820 Parkside is a standard-prep entry handleset on 5-1/2 inch centers with a 2-1/8 inch cross bore and 2-3/8 or 2-3/4 inch adjustable backset, so it goes onto the same bored prep most residential handlesets use. What does not carry over is the key: the Parkside is a Weslock 5-pin keyway, so it will not take your existing Schlage or Kwikset SmartKey keys. If keeping one key across the property matters more than the trim, stay in the family you already have, such as the Schlage F60 Addison with Accent lever or a Kwikset 687 SmartKey handleset.
6) Is the Weslock 2820 Parkside a Grade 2 handleset, and what else is Grade 2?
The Weslock 2820 Parkside is stated to exceed ANSI Grade 2 lock standards. Among comparable handlesets, the Master Lock HDLB Series single cylinder deadbolt handleset is Grade 2 entrance function, and the Schlage Residential F60 Addison is Grade 2 for 1-3/8 inch to 1-3/4 inch doors. The Kwikset 687AMD Amador and 687BW Belleview single cylinder handlesets are Grade 3, both listed for 1-3/4 inch doors and supplied as exterior only. That matters on a spec sheet that calls for Grade 2 minimum on entry doors.
7) What is the closest equivalent to the Weslock 2820 Parkside handleset from another brand?
The Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is the nearest match in function. Both are keyed single cylinder entrance handlesets for residential doors, and the Schlage F60 Addison is a Grade 2 lock from the F Series. The Weslock 2820 Parkside carries a Weslock keyway with a 5 pin cylinder, so the Schlage runs a different key system - if you are keying to existing Schlage cylinders on the property, the F60 is the one that keys in. The Weslock 2820 fits doors 1-3/8 inch to 2 inch thick, while the F60 Addison covers 1-3/8 inch to 1-3/4 inch.
8) I need a single cylinder handleset for a 1-3/4 inch thick entry door. Will the Weslock 2820 work or should I use something else?
The Weslock 2820 Parkside covers doors from 1-3/8 inch to 2 inch thick, so a 1-3/4 inch door is inside its range. If you want a lock rated at that thickness specifically, the Kwikset 687AMD Amador single cylinder handleset is listed for 1-3/4 inch doors and is a Grade 3 entrance lock, and the Schlage F60 Addison covers 1-3/8 inch to 1-3/4 inch at Grade 2. The Amador comes in a SmartKey version and an SC1 keyway SmartKey version, so pick by which key system the rest of the building uses.
9) What is the difference between the Weslock 2820 Parkside and the Emtek 3002 Memphis handleset?
They are not interchangeable. The Weslock 2820 Parkside is a keyed single cylinder entry handleset with a working deadbolt cylinder. The Emtek 3002 Memphis is a dummy function mortise entrance handleset - it is trim only, with no operating lock, used on a fixed or inactive leaf. The same holds for the Emtek 3004 Hamilton, 3005 Melrose and 3006 Manhattan, all dummy function. If you need the door to lock, the Emtek 3000 series dummies are the wrong choice no matter how close the styling looks.
10) We want keyless entry on the front door instead of a keyed handleset. What replaces the Weslock 2820 Parkside?
The Weslock 2820 Parkside is a keyed single cylinder handleset with a 5 pin Weslock cylinder. For a keypad instead, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset covers doors 1-3/4 inch to 2-1/4 inch, and the BYRD226CBARX adds Wi-Fi and Bluetooth over the same thickness range. The BYRD256 CBARX is key free with a passage handleset and trim connected by August. Kwikset also offers the 815SCEHFL San Clemente handleset with Halifax lever and a contemporary SmartCode keypad electronic deadbolt, SmartKey, RCAL latch and RCS strike, for 1-3/4 inch doors.
11) What should I use instead of the Weslock 2820 if the door needs a key on both sides?
The Weslock 2820 Parkside is single cylinder - keyed outside, thumbturn inside. For a double keyed opening, such as a door with glass beside the lock, the Baldwin Estates 6542 Tremont double cylinder entry mortise trim is the double cylinder counterpart to the Baldwin 6542 Tremont single cylinder version, both listed for 1-3/4 inch doors. Note these Baldwin 6542 items are mortise trim, so the door needs a mortise pocket rather than the bored prep the Weslock 2820 uses with its 2-1/8 inch cross bore.
12) Is the Weslock 2820 Parkside handleset strong enough for a rental or commercial entry?
It is a residential-duty handleset. The Parkside exceeds ANSI Grade 2 lock standards, which suits single family, condo, and light multi-family entries. For a commercial opening with real traffic, a mortise entry trim like the Baldwin Estates 6542 Tremont is the different animal to look at.
13) How much room does the Weslock Parkside handleset take up on the door face?
The exterior plate runs 16.98 inches by 2-7/8 inches with a 2-1/2 inch projection, and the interior is a 2-5/8 inch diameter round rose with a 2-5/8 inch projection. Measure your stile and any sidelight or storm door clearance against that 2-7/8 inch width and 2-1/2 inch projection before you commit, since a narrow-stile or full-glass door often will not carry a plate that long.
14) Single cylinder or double cylinder handleset for a door with glass next to it?
The 2820 Parkside is single cylinder: key outside, thumbturn inside. That is the normal choice and it is what egress codes generally want, but on a door with glass within reach of the turn some jurisdictions or insurers push for a double cylinder, keyed both sides. If you need that, the Baldwin Estates 6542 Tremont double cylinder entry mortise trim is the double cylinder option to price out instead.
15) Is there a keypad or smart version of this Weslock entry handleset?
The 2820 Parkside is mechanical only, key and thumbturn, no electronics. For a keypad or app-controlled entry with a handleset, look at the Kwikset 815 San Clemente handleset with the SmartCode keypad deadbolt and Halifax lever, or the Yale Assure Ridgefield touchscreen deadbolt handlesets, which come standalone or with Wi-Fi and Bluetooth.
16) Will the round strike on the Weslock Parkside match my frame prep?
It ships with a round corner strike and a round faceplate on the latch, which matches a frame and door edge that were routed with a radius corner, the common prep on a factory-machined residential door. If your existing strike and latch face are square corner plates, the round parts will leave the mortise pocket showing at the corners unless you square off the cut.
17) Is there a handleset that matches the Weslock 2820 door thickness range exactly?
The Deltana 810871 Montego handleset lists the same 1-3/8 inch to 2 inch door thickness range as the Weslock 2820 Parkside, so it drops into the same door prep depth without a thickness check. Both are handlesets for residential entry doors. The Weslock 2820 comes with a 5 pin Weslock keyway cylinder and an adjustable 2-3/8 inch or 2-3/4 inch backset.
18) Weslock 2820 Parkside with knob versus a handleset with a lever - what are the options?
The Weslock 2820 Parkside pairs the exterior handle with a Salem knob on the interior. If the opening needs a lever instead, the Schlage Residential F60 Addison uses an Accent lever and is Grade 2 for 1-3/8 inch to 1-3/4 inch doors, and the Schlage JE285 Barcelona style handleset uses a Seville lever over the same thickness range at Grade 2. Baldwin offers the Wesley handleset with either an Alcott knob or a Carnaby knob, both entrance function, if you want to stay with a knob.
19) I only need the exterior handle, not the interior trim. Is the Weslock 2820 sold that way?
The Weslock 2820 Parkside is a complete set - exterior handleset with a single cylinder deadbolt plus the interior deadbolt rosette, passage rosette and Salem knob. If you need exterior only, because the interior trim on the door is staying, the Kwikset 687AMD Amador single cylinder handleset and the Kwikset 687BW Belleview single cylinder handleset are both supplied exterior only, Grade 3, for 1-3/4 inch doors. The Amador is offered with SmartKey and in an SC1 keyway SmartKey version.
20) What is a solid brass alternative to the zinc alloy Weslock 2820 handleset?
The Weslock 2820 Parkside is built in zinc alloy. If the specification calls for solid brass, Deltana offers the 803871B Hanover handleset, the 815871 St. Ann handleset and the 825871 Kingston handleset, all entry function and all solid brass. All three are keyed entry handlesets like the Weslock 2820, so they suit the same front door application with a different material and styling.
21) Can I use the Schlage JI18/19 interconnected lock in place of the Weslock 2820 handleset?
They solve different problems. The Schlage Residential JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever in satin stainless steel, Grade 2, for 1-3/8 inch to 1-3/4 inch doors - the lever itself is passage function and the security comes from the deadbolt, with both retracting together. The Weslock 2820 Parkside is a handleset with a thumb operated exterior grip and a single cylinder deadbolt, entry function, fitting doors 1-3/8 inch to 2 inch. The door prep differs, so this is not a plate over plate swap.
22) Which single cylinder handleset comes in satin nickel besides the Weslock 2820?
The Weslock 2820 Parkside is offered in oil rubbed bronze and satin nickel. If you need another satin nickel single cylinder handleset to match, the Pamex FS7P31 Lexington single cylinder handleset is a satin nickel finish entry handleset covering 1-3/8 inch to 1-3/4 inch door thickness. That is useful when you are finishing out a building in one finish and need a second style on a different opening.
23) What is the Weslock Parkside handleset made of?
Zinc alloy. That is typical for a residential entry handleset at this level and it takes plated finishes well. Buyers who specifically want solid brass on an exterior door should look at the Deltana Hanover 803871B or Kingston 825871 entry handlesets instead.
24) Does the bottom of the Weslock 2820 handle have to line up with an existing hole?
No. The Parkside handle foot uses an adjustable foot screw with a round foot cap, so the lower end of the grip is fastened without a fixed second bore to hit. That is what lets one handleset cover a 1-3/8 to 2 inch thickness range.
How fast can I get the Weslock 02820-NSNFR2D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Weslock 02820-NSNFR2D come with a warranty?
Absolutely. The Weslock 02820-NSNFR2D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Weslock 02820-NSNFR2D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Weslock 02820-NSNFR2D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!