You may also like
Weslock MANSION Single Cylinder Handleset
If security, safety, and style are important to you, then Weslock is your choice for quality hardware for your home. Not only are Weslock door handle and deadbolt products strong and long lasting, but they also offer a beautiful aesthetic for your home. With designs that enhance the look and feel of your home and details, such as concealed installation screws, that merge function and form, Weslock offers a product unmatched by the competition.
Standard features
- Exceeds ANSI A 156.2 Grade II Lock standards
- Solid Molten Brass
- 1” Throw bolt with two hardened steel rollers prevent sawing
- Removable knob/lever prevents scratching during installation
- Fits doors prepared with 2-1/8” top (1-5/8“ optional) and 2-1/8” bottom cross holes and 1” edge hole
- 5-1/2” minimum center to center cross hole spacing
- Optional door thickness up to 2-1/4”
- Adjusts to door thickness from 1-3/4” - 2”
- Limited Lifetime Mechanical Warranty
- Limited 10 Year Finish Warranty
Manufacturer Resources
Product Specs
- Product Group:
- Mechanical Locks
- Series:
- Molten Bronze Series
- Warranty:
- Limited Lifetime Mechanical and Limited 10 Year Finish
- Collection:
- Molten Bronze
- Cross Bore:
- 2-1/8"
- Keyed Function:
- Single Cylinder
- Product Subgroup:
- Bored Locksets
- Product Type:
- Handlesets
- Subcategory:
- Residential Handlesets
- Keyed:
- Yes
- Commercial/Residential:
- Residential
- Lock Function:
- Entry
- IMAP Policy:
- Yes
- Product Function:
- Entry
- Door Thickness Range:
- 1-3/8" to 2"
- Product Style:
- Mansion
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Weslock 06651-NINSL2D – Frequently Asked Questions
1) Will the Weslock 6651 Mansion handleset fit a 2-1/4 inch thick door?
Only if you order it that way. The 6651 Mansion handleset ships standard for 1-3/4 to 2 inch doors, and there is a separate door thickness selection for 2 to 2-1/4 inch openings that you pick when you order. Pick the wrong one and the spindle and screws won't reach on a heavy custom door. On thinner doors the lockset covers down to 1-3/8 inches.
2) What door prep does the Weslock 6651 handleset need, and will it drop into an existing bored door?
It goes into a standard bored prep: 2-1/8 inch cross bores top and bottom with a 1 inch edge bore, and the top hole can be 1-5/8 inch instead if that is what your door already has. The center-to-center spacing between the two cross holes has to be at least 5-1/2 inches. Most pre-bored entry doors for a handleset-plus-deadbolt already carry that 5-1/2 inch spacing, so a swap out of an older handleset usually needs no new boring. Measure the existing hole spacing before you order if the door was drilled on site.
3) Is the Weslock 6651 Mansion keyed on both sides or just outside?
Single cylinder, keyed one side. Key outside, thumbturn inside on the deadbolt. That is the configuration most residential codes want on a door with glass nearby only if the glass is far enough from the turn, but it is also the one that lets people out fast in a fire. If you specifically need a key on both faces, look at a double cylinder entry trim such as the Baldwin Estates 6542 Tremont double cylinder.
4) Can I get several Weslock 6651 handlesets keyed alike for a house with multiple entry doors?
Yes. Keying is a free selection at order time, either keyed different or keyed alike. If you're doing a front, side, and garage-to-house door and want one key for all three, order all of them keyed alike in the same order so they come from the factory on a common key. Keyed different is the default for single-door buys.
5) I want to move a rental unit to keypad entry instead of a keyed handleset. What replaces the Weslock 6651?
The Weslock 6651 Mansion uses a single cylinder keyed deadbolt above the handle. To keep the handleset look and drop the key, the Yale Real Living BYRD256 CBARX Assure key free touchscreen deadbolt with Ridgefield passage handleset and trim runs on Wi-Fi, and the BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset runs without a network connection. The Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever pairs a contemporary SmartCode keypad electronic deadbolt with an RCAL latch and RCS strike on 1-3/4 inch doors. The Yale units fit 1-3/4 inch to 2-1/4 inch doors, which is a different range than the Weslock 6651.
6) What is the closest equivalent to the Weslock 6651 Mansion handleset from another brand?
The Weslock 6651 Mansion is a single cylinder entry handleset with an Impresa knob on the interior, and the nearest peer is the Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever, part SCR-F60-KEYED-ADD-ACC, a Grade 2 entrance handleset in the F Series. The functional difference is the interior trim shape: the Weslock 6651 carries a knob, the F60 Addison carries a lever. The Master Lock HDLBA0615/4D single cylinder deadbolt handleset in the HDLB Series is also a Grade 2 entrance handleset if the Weslock styling is not required.
7) Which entry handleset should I use on a 2-1/4 inch thick door?
The Weslock 6651 Mansion adjusts to a 1-3/8 inch to 2 inch door thickness range, with an option that carries it to 2-1/4 inches. If a door is thicker than the standard range, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset covers 1-3/4 inch to 2-1/4 inch doors, as does the BYRD226CBARX Wi-Fi and Bluetooth version. Those Yale units replace the key cylinder with a touchscreen keypad rather than a keyed single cylinder, so the entry method changes along with the thickness coverage.
8) Is the Baldwin Estates 6542 Tremont a drop-in replacement for a Weslock 6651 handleset?
No. The Baldwin Estates 6542 Tremont is entry mortise trim, offered as single cylinder under BAL-6542ENTR and double cylinder under BAL-6542DBLC, both entrance function for 1-3/4 inch doors. Mortise trim mounts to a mortise lock body pocketed into the door edge, while the Weslock 6651 Mansion is a bored set that fits 2-1/8 inch cross holes with a 1 inch edge hole. Swapping between them means changing the door prep, not just the hardware.
9) How does the Weslock 6651 grade compare with the Kwikset 687 Amador and Belleview handlesets?
The Weslock 6651 Mansion exceeds ANSI A156.2 Grade 2 lock standards. The Kwikset 687AMD Amador single cylinder handlesets, offered as KWI-687AMD-S with SmartKey and KWI-687AMD-SMC with an SC1 keyway SmartKey, are Grade 3 entrance handlesets, as is the 687BW Belleview KWI-687BW-S. All three Kwikset sets are exterior trim only and fit 1-3/4 inch doors, so an interior knob or lever is ordered separately, where the Weslock 6651 includes the Impresa knob inside.
10) Which single cylinder handleset fits a 1-3/8 inch door?
The Weslock 6651 Mansion covers a 1-3/8 inch to 2 inch door thickness range, so it reaches 1-3/8 inch doors. Peers that also reach that thickness are the Pamex FS7P31 Lexington single cylinder handleset in satin nickel, an entry function set for 1-3/8 inch to 1-3/4 inch doors, and the Schlage Residential F60 Addison with Accent lever, a Grade 2 F Series entrance handleset over the same 1-3/8 inch to 1-3/4 inch range. Several other handlesets, including the Kwikset 687AMD Amador and 687BW Belleview, are listed only for 1-3/4 inch doors.
11) Can I use a double cylinder entry trim where a Weslock 6651 was specified?
The Weslock 6651 Mansion is single cylinder, meaning a key outside and a thumbturn inside. A double cylinder alternative is the Baldwin Estates 6542 Tremont double cylinder entry mortise trim, part BAL-6542DBLC, an entrance function unit for 1-3/4 inch doors; its single cylinder counterpart is BAL-6542ENTR. Double cylinder requires a key on both sides, which changes the egress behavior of the opening and is restricted by code in many occupancies, and both Baldwin units are mortise trim rather than bored.
12) Is the Weslock Mansion handleset rated for commercial use or just houses?
Residential. It's built to exceed ANSI A156.2 Grade 2 lock standards, which is solid for a home front door or a single-family rental, but it is catalogued and built as residential hardware. For an apartment building corridor or a commercial entrance where the door sees hundreds of cycles a day, you want a Grade 1 commercial cylindrical or mortise lock instead.
13) Handleset with a knob versus a lever on an entry door, which should I pick?
The 6651 Mansion pairs the exterior grip handle with an Impresa knob inside. A knob is the traditional look and it resists being pushed open by a passing coat or a dog's paw. A lever is easier for anyone with limited grip strength and is what you want on an accessible entry. If the interior needs a lever, the Schlage F60 Addison handleset comes with an Accent lever, and the Schlage JE285 Barcelona pairs a Seville lever with a non-keyed entry function.
14) Do I have to specify handing when I order the Weslock 6651 Mansion handleset?
No. The 6651 is a bored handleset with a 2-1/8 inch cross bore and a 1 inch edge bore, and that prep is symmetrical, so the same unit works left or right hand. What you do have to specify is door thickness and whether you want it keyed alike to your other locks. Both are required selections on the order.
15) What is a simpler alternative to a keyed handleset for a door that does not need a lock?
The Weslock 6651 Mansion is keyed with a single cylinder deadbolt. For an opening that takes the same handleset appearance without a key, the Schlage Residential JE285 Barcelona style handleset with Seville lever, part SCR-JE285-NONKEYED-BAR-SEV, is a non-keyed entry function handleset in the Grade 2 J Series covering 1-3/8 inch to 1-3/4 inch doors. Emtek also offers dummy mortise entrance handlesets that operate nothing at all, including the 3002 Memphis, 3004 Hamilton, 3005 Melrose, and 3006 Manhattan, for inactive leaves of a pair.
16) What handleset gives the same knob interior trim as the Weslock 6651 Mansion in another brand?
The Weslock 6651 Mansion pairs its exterior handle with an Impresa knob inside. Baldwin builds the Wesley handleset with knob trim in two knob styles: the 180WYHXATK with the Alcott knob and the 180WYHXCYK with the Carnaby knob, both entrance function. Those are the closest knob-trim handlesets when a lever interior is not wanted, since most peer entry handlesets pair with levers.
17) What solid brass entry handlesets compare with the Weslock 6651 Mansion?
The Weslock 6651 Mansion is built on a brass substrate in the Molten Bronze collection. Deltana offers four solid brass handlesets in entry function that sit in the same material class: the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston, each solid brass entry handlesets, plus the 810871 Montego, which covers a 1-3/8 inch to 2 inch door thickness range matching the Weslock 6651 standard range. The difference between them is the escutcheon and grip styling of each series.
18) What should I use instead of a handleset when the door needs a lever and a deadbolt that retract together?
The Weslock 6651 Mansion is an entry handleset with a separately operated single cylinder deadbolt above a knob-trimmed handle. Where the opening calls for interconnected operation instead, the Schlage Residential JI18/19 interconnected passage lock with keyed deadbolt and Torino lever in satin stainless steel is a Grade 2 JI Series unit in passage function for 1-3/8 inch to 1-3/4 inch doors. It gives a lever and a keyed deadbolt on one chassis rather than the handle-and-thumbpiece form of the Weslock 6651.
19) What is the Weslock 6651 handleset actually made of, and will it hold up outdoors?
Solid molten brass, part of Weslock's Molten Bronze line. Cast brass has real mass behind the escutcheon and the grip rather than a thin stamped shell, which is why it takes weather on an exposed entry better than plated pot metal. Two finishes: Oil Rubbed Bronze and Satin Nickel. Oil rubbed bronze is a living finish and will change tone at the touch points over time.
20) Will the interior knob get scratched during install on the Weslock Mansion?
The interior knob comes off. Weslock builds the knob and lever removable specifically so it isn't in the way while you're setting screws, and the installation screws sit concealed once it's together, so there's no exposed fastener head on the face of the trim. Useful if you're hanging a set of doors and the painters are still working around you.
How fast can I get the Weslock 06651-NINSL2D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Weslock 06651-NINSL2D come with a warranty?
Absolutely. The Weslock 06651-NINSL2D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Weslock 06651-NINSL2D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Weslock 06651-NINSL2D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.