Wiremold 25DTC-412WH 25DTC Ser...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$376.61
Wiremold 25DTC-412WH 25DTC Series Blank Steel Tele-Power Pole, White

Wiremold 25DTC-412WH 25DTC Series Blank Steel Tele-Power Pole, White

(No reviews yet) Write a Review

Model: 25DTC-412WH

In Stock (leaves warehouse same day if ordered before 3pm ET)

$376.61
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Wiremold 25DTC-412WH 25DTC Series Blank Steel Power Pole

The Wiremold 25DTC-412WH is a blank steel Tele-Power® pole from the 25DTC Series, engineered to bring power and telecommunications wiring from an accessible ceiling to open work areas where wall outlets are impractical. This pole measures 12-ft in length with a 2-1/4-Inch x 5/16-Inch cross-section and is finished in White to blend into most commercial ceiling and office environments. Supplied blank, this steel pole has no pre-cut device openings, giving electrical contractors and facility installers the flexibility to field-configure the pole to match the specific device plates, receptacles, or communications jacks required for the installation. As part of the established 25DTC Tele-Power pole family, it is designed to work with compatible Wiremold raceway and pole accessories for a coordinated power and data delivery system in open-plan offices, retail floors, and other spaces without perimeter wall access.

Key Features

  • Pole Length: 12-ft overall length for reaching from ceiling-height power and data sources down to workstation level.
  • Cross-Section Dimensions: 2-1/4-Inch x 5/16-Inch steel profile sized to house power and communications wiring within a single low-profile pole.
  • Durable Construction: Steel pole body provides a rigid, long-lasting raceway for vertical wire distribution in commercial interiors.
  • Blank Configuration: Supplied without pre-cut device openings, allowing installers to customize outlet and jack placement on site.
  • Finish: White finish for a clean, unobtrusive appearance in office and retail ceiling-to-floor installations.
  • Tele-Power® Series Design: Part of the 25DTC Series of Tele-Power poles, built to route both electrical power and telephone/data wiring in a single vertical raceway.

Technical Specifications

  • Series: 25DTC Tele-Power® Pole
  • Length: 12-ft
  • Cross-Section: 2-1/4-Inch x 5/16-Inch
  • Material: Steel
  • Color/Finish: White
  • Configuration: Blank, no pre-cut device openings

Typical Applications

  • Open-Plan Office Power and Data Distribution
  • Retail Floor Fixture and Register Wiring
  • Workstation and Cubicle Power Poles
  • Commercial Interior Renovation Projects
  • Ceiling-Fed Power and Telecommunications Runs

Why Wiremold?

Wiremold's 25DTC Series Tele-Power poles combine durable steel construction with a flexible, blank design that lets electrical contractors tailor each installation to the exact device requirements of the space. This 12-ft, White-finished pole delivers a clean, code-conscious solution for routing power and communications wiring from ceiling to workstation, backed by Wiremold's reputation for reliable commercial wiring management systems.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
WIRE-20260924
Product Type:
Power Pole
Series:
25DTC
Configuration:
Blank (No Pre-Cut Openings)
Department:
Electrical
Product Subgroup:
Raceway & Cord Covers
Product Material:
Steel
Product Color:
White
Product Group:
Wiring Devices
Country Of Origin:
United States
Product Width:
2.312 in
Product Weight:
23 lb
Product Height:
149.86 in

Wiremold 25DTC-412WH – Frequently Asked Questions

1) Does the Wiremold 25DTC-412WH power pole come with outlet openings already cut?
No. The 25DTC-412WH ships blank, with no pre-cut device openings. You cut and configure the device locations on site to match the receptacles, device plates, or data jacks the job calls for. If you want a pole that arrives with factory openings and devices, you need a different configuration in the Tele-Power pole family, not this one.
2) How long is the Wiremold 25DTC Tele-Power pole, and will it reach from a high ceiling?
It is a 12-foot pole, so it is sized for ceilings well above standard 8- or 9-foot office height. The pole runs from an accessible ceiling down to workstation level, so for a typical suspended ceiling the extra length gives you room to trim or terminate at the height you want rather than coming up short.
3) Can I run power and data cabling in the same Wiremold Tele-Power pole?
Yes. The 25DTC Series is built as a dual-service pole: it routes electrical power and telephone/data wiring in a single vertical raceway from a ceiling feed. Separation of the two services within the pole is handled by the Tele-Power design, which is why the 25DTC family is specified for open-plan offices where you need a receptacle and a jack at the same drop.
4) Do I need other Wiremold parts to finish a 25DTC pole installation?
Yes, plan on them. Supplied blank, the pole has no devices, plates, or jacks in it, so you add the receptacles and communications jacks the layout calls for. The 25DTC pole is designed to work with compatible Wiremold raceway and pole accessories so the ceiling feed and the pole make one coordinated system. Order the device plates and fittings alongside the pole rather than after it.
5) What is the cross-section of the 25DTC-412WH pole?
The steel profile measures 2-1/4 inches by 5/16 inches. That low-profile section carries both power conductors and telephone/data cable in the one vertical raceway, which is what lets you feed a workstation without running anything to a perimeter wall.
6) Is this pole steel or aluminum, and what finish does it come in?
Steel body, white finish. Steel gives a rigid pole for a ceiling-to-floor run in a commercial interior, and the white matches most office and retail ceiling grids and painted drywall. If your interior standard is aluminum or a brushed look, this is not the one to order.
7) What does a property manager or contractor use a Tele-Power pole for instead of adding a wall outlet?
A power pole is the answer when there is no usable wall to run conduit to, which is the normal case in open-plan offices, cubicle clusters, and retail sales floors. You tap power and communications at an accessible ceiling and bring them straight down to the work area. On renovation work it avoids opening up finished walls or coring a floor for a box.
How fast can I get the Wiremold 25DTC-412WH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Wiremold 25DTC-412WH come with a warranty?
Absolutely. The Wiremold 25DTC-412WH is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Wiremold 25DTC-412WH?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Wiremold 25DTC-412WH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!