Wiremold 5410 Entrance End Fit...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$121.43
Wiremold 5410 Entrance End Fitting - Ivory Plastic Raceway Component 5.468" x 1.781" x 1.875"

Wiremold 5410 Entrance End Fitting - Ivory Plastic Raceway Component 5.468" x 1.781" x 1.875"

(No reviews yet) Write a Review

Model: WM-5410
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$121.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Wiremold 5410 Entrance End Fitting

Professional Raceway System Component for Clean Cable Management

The Wiremold 5410 Entrance End Fitting provides a professional solution for raceway system termination and cable entry points. This ivory plastic component delivers reliable performance in commercial and residential applications, featuring durable construction with precise dimensions for secure installation and long-lasting service.

Professional Features & Benefits

  • Ivory Color Finish: Provides a clean, professional appearance that blends seamlessly with standard office and residential environments.
  • Plastic Construction: Offers lightweight durability and resistance to impact while maintaining electrical insulation properties.
  • Compact Dimensions: 5.468" length x 1.781" width x 1.875" depth design ensures versatile installation in tight spaces.
  • Lightweight Design: 0.114 lb weight facilitates easy handling and installation without structural stress.
  • Precision Engineering: Exact dimensional specifications ensure proper fit with compatible raceway systems.
  • Professional Grade: Designed for reliable performance in electrical distribution and cable management applications.

Technical Specifications

  • Product Color: Ivory
  • Product Depth: 1.875 in
  • Product Length: 5.468 in
  • Product Material: Plastic
  • Product Weight: 0.114 lb
  • Product Width: 1.781 in
  • Department: Electrical

Installation & Operation

  1. Mount the fitting in the designated location with appropriate clearance and access for cable routing.
  2. Connect to compatible raceway sections following manufacturer guidelines and electrical code requirements.
  3. Route cables through the entrance fitting according to capacity specifications and proper bend radius.
  4. Secure all connections and verify proper alignment with adjacent raceway components.
  5. Test cable routing and ensure smooth operation without binding or interference.
  6. Complete final inspection and verify compliance with applicable electrical installation standards.

Professional Applications

  • Commercial Office Buildings
  • Retail and Healthcare Facilities
  • Educational Institutions
  • Residential Electrical Systems
  • Industrial Control Rooms
  • Data Center Cable Management
  • Telecommunications Infrastructure

Why Choose Wiremold Quality?

Wiremold entrance end fittings deliver proven reliability through precision manufacturing and durable plastic construction. The ivory finish and compact design provide professional aesthetics while maintaining the structural integrity needed for long-term electrical system performance.

Manufacturer Resources

Product Specs

Product Color:
Ivory
Product Depth:
1.875 in
Product Length:
5.468 in
Product Material:
Plastic
Product Weight:
0.114 lb
Product Width:
1.781 in
Department:
Electrical
Product Group:
Wiring Devices
Product Type:
Raceway Fitting
Product Subgroup:
Raceway & Cord Covers
Country of Origin:
United States

Wiremold WM-5410 – Frequently Asked Questions

1) What does the Wiremold 5410 entrance end fitting actually do in a surface raceway run?
The 5410 is the termination piece at the end of a surface raceway run, giving cable a finished entry or exit point instead of an open raceway end. It's a plastic fitting in ivory, so it reads as a trim component rather than a structural one, and it's installed at the point where conductors leave the raceway.
2) How much clearance do I need to plan for the Wiremold 5410 end fitting at the end of a run?
Allow for a footprint of 5.468 x 1.781 x 1.875 inches. That's the whole fitting, so if you're terminating into a corner, behind a desk return, or against a door casing, you need roughly five and a half inches of clear raceway line beyond the last coupling before the wall or obstruction.
3) Is the Wiremold 5410 fitting metal or plastic, and does that matter for grounding?
It's plastic, not metal. That means the fitting itself is non-conductive and carries no part of the equipment grounding path, so on a run where grounding continuity is being carried by the raceway you need a metal system instead. On a nonmetallic raceway run, the ground is in the conductors anyway and a plastic end fitting is the correct part.
4) Will the ivory 5410 end fitting match my existing raceway if the rest of the run is white?
No. The 5410 is supplied in ivory only, and ivory against white reads as an obvious mismatch under office lighting. If your installed raceway is white, order the matching white version of the fitting rather than trying to blend ivory into it.
5) Does the Wiremold 5410 come with mounting screws or anchors?
The 5410 is the fitting itself, and nothing is listed as packed with it. Plan on supplying your own fasteners suited to the substrate you're mounting to, whether that's drywall anchors, masonry anchors, or sheet metal screws.
6) What part number do I order for the Wiremold ivory entrance end fitting?
Order Wiremold 5410. That is the manufacturer part number, and it covers the ivory plastic entrance end fitting. Quote it as-is to a distributor and there's no suffix to add for color, since ivory is the only version.
7) Can I use the 5410 entrance end fitting in a healthcare or school corridor installation?
It's used in commercial office, retail, healthcare, educational, industrial control room, data center, and telecom applications. Bear in mind it's a plastic surface component, so in a high-abuse corridor at chair-rail height a metal raceway system will hold up better to cart and wheelchair impact.
8) Is the 5410 fitting light enough to hang off a raceway run without extra support?
At 0.114 lb it adds essentially no load. The raceway itself and your normal mounting spacing carry it; you don't need a dedicated strap or bracket for the fitting.
How fast can I get the Wiremold WM-5410 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Wiremold WM-5410 come with a warranty?
Absolutely. The Wiremold WM-5410 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Wiremold WM-5410?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Wiremold WM-5410 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!