Wiremold 880M1 OmniBox Series ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$79.08
Wiremold 880M1 OmniBox Series Single Gang Shallow Steel Floor Box

Wiremold 880M1 OmniBox Series Single Gang Shallow Steel Floor Box

(No reviews yet) Write a Review

Model: 880M1

In Stock (leaves warehouse same day if ordered before 3pm ET)

$79.08
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Wiremold 880M1 OmniBox Series Single Gang Shallow Steel Floor Box

The Wiremold 880M1 is a single gang shallow stamped steel floor box from the OmniBox® Series, engineered to provide a low-profile, in-floor mounting solution for power and communications devices. Measuring 4-13/16" x 3-23/32" x 2-15/32" with a 37-cubic-inch capacity, this compact floor box is designed for installations where floor depth is limited but reliable device housing is still required. Built from durable stamped steel, the 880M1 delivers a rugged, code-conscious enclosure for single-gang devices installed at floor level in commercial and institutional spaces.

Key Features

  • Shallow Profile Design: Overall dimensions of 4-13/16" x 3-23/32" x 2-15/32" allow installation in floor assemblies with limited depth, making the 880M1 suitable for retrofit and shallow-slab applications.
  • 37-Cubic-Inch Capacity: Provides adequate interior volume for a single-gang device while maintaining a compact overall footprint.
  • Durable Construction: Stamped steel housing offers a rugged, long-lasting enclosure built to withstand the demands of floor-level installation and foot traffic in commercial environments.
  • Single Gang Configuration: Sized to accommodate one standard gang device, simplifying device selection and wiring layout for power or communications drops.
  • OmniBox® Series Design: Part of Wiremold's OmniBox® floor box line, engineered for consistent fit and function across compatible covers and accessories within the series.

Technical Specifications

  • Series: OmniBox®
  • Configuration: Single Gang
  • Material: Stamped Steel
  • Dimensions: 4-13/16" x 3-23/32" x 2-15/32"
  • Capacity: 37 Cubic Inches
  • Profile: Shallow

Typical Applications

  • Commercial Office Floor Outlets
  • Retrofit Installations with Limited Floor Depth
  • Single-Gang Power or Communications Device Housing
  • Open-Plan and Modular Workspace Wiring
  • Institutional and Educational Facility Floor Installations

Why Wiremold?

Wiremold's OmniBox® Series is built on stamped steel construction and precise dimensional engineering to deliver dependable floor box solutions for demanding commercial environments. The 880M1's shallow profile and single-gang capacity reflect Wiremold's focus on practical, space-conscious designs that fit real-world floor conditions. Choosing the 880M1 means specifying a floor box built for durability and consistent fit within the trusted OmniBox® product family.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
WIRE-20260924
Product Type:
Floor Box
Configuration:
Single Gang
Series:
OmniBox
Department:
Electrical
Product Subgroup:
Electrical
Product Material:
Stamped Steel

Wiremold 880M1 – Frequently Asked Questions

1) How deep a floor does the Wiremold 880M1 floor box need?
The 880M1 is a shallow box measuring 4-13/16 x 3-23/32 x 2-15/32 inches overall, so the depth you have to accommodate is the 2-15/32 inch dimension. That is what makes it usable in thin slabs, topping pours, and retrofits where a standard-depth floor box will not clear the underside of the deck. Measure your available floor depth plus any conduit run below before committing.
2) How many devices fit in the Wiremold 880M1 OmniBox floor box?
One. The 880M1 is a single gang box with 37 cubic inches of interior volume, sized for a single standard gang device, power or communications. If you need two devices at the same location you need a multi-gang floor box instead, not this one.
3) Does the Wiremold 880M1 come with a cover and receptacle?
No. The 880M1 is the steel box only. Covers, carpet or tile flanges, plates, and the device itself are ordered separately from the OmniBox line, which is built for consistent fit across compatible covers and accessories in the series. Plan on a cover assembly and a device on the same order.
4) Is 37 cubic inches enough volume for the conductors I need to land in a floor box?
The 880M1 gives you 37 cubic inches of box volume for one gang. Box fill is counted per conductor, device, and clamp under the NEC, so with 37 cubic inches you have generous room for a single receptacle or a data jack and the conductors feeding it. Do the fill calculation for your actual conductor count and size rather than assuming.
5) Is a steel floor box the right choice, or should I use a nonmetallic one?
The 880M1 is stamped steel, which is the usual pick for above-grade slab and wood-frame floors where the box takes foot traffic and you want a rugged metal enclosure that bonds with the raceway system. Nonmetallic floor boxes are generally chosen for on-grade or below-grade pours where moisture and corrosion are the bigger concern. For a dry interior commercial floor, steel is the conventional specification.
6) Can the Wiremold 880M1 be used in an existing floor, or is it only for new pours?
Both are in scope. The shallow 2-15/32 inch depth is specifically called out for retrofit work and shallow-slab applications, which is where a standard-depth box usually will not fit. It is equally at home in new commercial office floor outlets, open-plan and modular workspace wiring, and institutional or educational floors.
7) Will the Wiremold 880M1 hold a data jack as well as a receptacle?
Yes. The box is sized for one standard gang device and is used for either power or communications drops, so a single-gang data insert or a receptacle both work. Since it is one gang, you are choosing one or the other at that location, not both.
8) What is the exact part number to order the Wiremold single gang shallow steel floor box?
Order Wiremold 880M1. That is the manufacturer part number for the single gang shallow stamped steel OmniBox floor box, and it is the number to quote for a distributor or a submittal package.
How fast can I get the Wiremold 880M1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Wiremold 880M1 come with a warranty?
Absolutely. The Wiremold 880M1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Wiremold 880M1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Wiremold 880M1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!