Wiremold 2400 Series Steel Rac...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$540.00
Wiremold 2400 Series Steel Raceway Base & Cover 60.06" x 1.88" x 0.88" Ivory Cable Management System, 100 Pack

Wiremold 2400 Series Steel Raceway Base & Cover 60.06" x 1.88" x 0.88" Ivory Cable Management System, 100 Pack

(No reviews yet) Write a Review

Model: V2400BC
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$540.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Wiremold 2400 Series Steel Raceway Base & Cover

Professional Cable Management Solution

The Wiremold 2400 Series Steel Raceway Base & Cover delivers reliable cable management and wire protection for professional installations. This durable steel construction raceway system provides secure routing for electrical wiring while maintaining a clean, professional appearance with its ivory finish.

Professional Features & Benefits

  • Steel Construction: Provides superior durability and protection for electrical wiring in demanding environments
  • 60.06" Length: Offers extended coverage for long runs, reducing the need for multiple joints and connections
  • 1.88" Height Profile: Accommodates multiple cables while maintaining a low-profile installation
  • 0.88" Depth: Provides adequate wire capacity while minimizing wall projection
  • Ivory Finish: Blends seamlessly with most interior environments and maintains professional appearance
  • Base & Cover Design: Allows easy access for wire installation and future modifications

Technical Specifications

  • Product Color: Ivory
  • Product Depth: 0.88 in
  • Product Height: 1.88 in
  • Product Material: Steel
  • Product Volume: 99.36
  • Product Weight: 0.73 lb
  • Product Width: 60.06 in
  • Department: Electrical

Installation & Operation

  1. Mount the base securely to the wall surface using appropriate fasteners for the substrate type.
  2. Plan wire routing and ensure adequate bend radius for all cables being installed.
  3. Install wiring through the raceway base, maintaining proper separation between power and data cables.
  4. Snap the cover into place over the base, ensuring secure engagement along the entire length.
  5. Verify all connections are secure and the cover is properly seated before energizing circuits.
  6. Complete installation with appropriate end caps and fittings as required by local codes.

Professional Applications

  • Commercial Office Buildings
  • Retail Establishments
  • Educational Facilities
  • Healthcare Facilities
  • Light Industrial Applications
  • Residential Multi-Unit Properties
  • Professional Service Centers

Why Choose Wiremold Quality?

Wiremold raceway systems provide proven reliability and professional performance for cable management applications. The steel construction ensures long-term durability while the ivory finish maintains aesthetic appeal in professional environments. This raceway system delivers the quality and dependability expected from professional electrical installations.

Manufacturer Resources

Product Specs

Product Color:
Ivory
Product Depth:
0.88 in
Product Height:
1.88 in
Product Material:
Steel
Product Volume:
99.36
Product Weight:
0.73 lb
Product Width:
60.06 in
Department:
Electrical
Product Group:
Cable Management
Product Type:
Raceways

Wiremold V2400BC – Frequently Asked Questions

1) Does the Wiremold 2400 raceway come with the cover, or do I order base and cover separately?
Base and cover ship together as one assembly. The cover snaps over the base after the wire is in, so you can reopen a run later to add or pull a circuit without tearing the base off the wall.
2) Do I need fittings and end caps with Wiremold 2400 raceway, or is that all I need to order?
The base and cover alone will not finish a run. You still need end caps, couplings, elbows and any device or box fittings for the 2400 channel, plus fasteners suited to the wall substrate you are anchoring into: masonry anchors on block, toggles on hollow drywall, screws into studs. Budget those separately when you price out a job.
3) How far does Wiremold 2400 raceway stick out from the wall?
Projection off the wall is 0.88 in, with the run measuring 1.88 in across the face. That keeps it under an inch off the surface, so it clears most baseboard trim, door casings and furniture backs, and it will not read as a bulky surface run in a finished office or lobby.
4) What size wire can I run in Wiremold 2400 series steel raceway?
The 2400 series base and cover gives you an interior channel behind a 1.88 in by 0.88 in outside profile in steel, so it is a small-capacity surface raceway meant for branch circuit runs and low voltage drops, not for bundled feeders. Plan the fill and the bend radius for the cables you are pulling, and keep power and data separated inside the channel if you are running both.
5) What color does Wiremold 2400 raceway come in?
Ivory is the only finish offered on the V2400BC. If you are matching existing runs in a building, ivory is the common legacy office color, so it typically blends with older installed raceway and devices rather than the white used on newer work.
6) Can I use Wiremold 2400 steel raceway in a hospital or school instead of cutting into the walls?
Surface raceway is the usual answer in occupied healthcare and education buildings precisely because you are not opening walls, and the 2400 series is called out for healthcare facilities, educational facilities, commercial offices, retail and multi-unit residential. Steel construction holds up in corridors where a plastic channel gets damaged. Local code still governs the wiring method, so confirm the run against your AHJ before you commit a large pack.
7) Should I use a single channel raceway like the 2400 or a divided one for running power and data together?
The 2400 is a single channel base and cover. You can run power and data in it if you maintain separation inside the channel, but there is no integral divider holding that separation for you. If your job requires a physical barrier between line voltage and communications, a two compartment raceway is the better choice; for a straight branch circuit extension or a run of low voltage on its own, the single channel is simpler and cheaper to install.
How fast can I get the Wiremold V2400BC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Wiremold V2400BC come with a warranty?
Absolutely. The Wiremold V2400BC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Wiremold V2400BC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Wiremold V2400BC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!