Wooster Pro/Doo-Z FTP Fabric Roller Cover

Wooster Pro/Doo-Z FTP Fabric Roller Cover

The Wooster Pro/Doo-Z FTP Fabric Roller Cover is a Wooster-exclusive fabric cover identified by its signature golden double pinstripe, available across the Pro/Doo-Z FTP line in 9" and 18" lengths with a choice of 3/16", 3/8" or 3/4" nap so painters can match the cover to the surface texture and the job at hand. The fabric is formulated for today's paints, including flat, eggshell, satin, semigloss and gloss finishes, as well as enamels, primers, urethanes and epoxies, so one line of covers handles most interior and exterior repaint work without switching fabrics mid-job. Shorter nap options in this family are engineered for a smooth, tight finish with great paint capacity on smoother surfaces, while the heavier nap options are built for surfaces that need more paint lay-down.

Key Features

• Lengths: Available in 9" and 18" roller cover lengths to fit standard and wide roller frames.
• Nap Options: Choose from 3/16", 3/8" or 3/4" nap depending on surface texture and desired finish.
• Fabric: Wooster-exclusive fabric with a golden double pinstripe for a smooth finish and great capacity.
• HydroFlow Technology: Provides controlled release of paint to improve paint flow during application.
• Shed-Resistant & High Density: Formulated for today's paints, including flat, eggshell, satin, semigloss and gloss finishes, as well as enamels, primers, urethanes and epoxies.
• Finish Quality: Designed to deliver a smooth, even finish with reduced fiber shedding into the coating.
• Nap Selection Guidance: The 3/16" nap suits smoother surfaces and a tight, fine finish; 3/8" and 3/4" nap suit surfaces needing heavier paint lay-down.

Technical Specifications

• Lengths Available: 9", 18"
• Nap Options Available: 3/16", 3/8", 3/4"

Typical Applications

• Rolling flat, eggshell, satin, semigloss and gloss wall and ceiling paints where a smooth, tight finish is required.
• Applying enamels, primers, urethanes and epoxies that benefit from a shed-resistant, high-density fabric.
• Projects where controlled paint release and consistent flow are needed to avoid streaking or flashing.
• General interior and exterior repaints on smoother substrate textures suited to a 3/16" nap.
• Heavier-textured or rougher surfaces where a 3/8" or 3/4" nap is better suited for proper paint lay-down.
• Standard 9" roller frames for typical wall and ceiling work, or 18" frames for larger surfaces.

Why Wooster?

Wooster's Pro/Doo-Z FTP line pairs an exclusive, shed-resistant fabric with HydroFlow technology to give painters a cover that holds and releases paint evenly across flats, eggshells, satins, semiglosses, glosses, enamels, primers, urethanes and epoxies. The golden double pinstripe marks this as genuine Wooster-exclusive fabric, and the Pro/Doo-Z FTP line spans 9" and 18" lengths in 3/16", 3/8" and 3/4" nap, so the right cover for every surface and every job comes from the same trusted fabric.