Accentra 5800 Series Cast Iron...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$630.63
$184.88
Yale Commercial Yale 5800 Series Cast Iron Door Closers YAL-5800

Accentra 5800 Series Cast Iron Surface Mounted Door Closer with Adjustable Spring Power

(No reviews yet) Write a Review

Model: YAL-5801 689
$630.63
$184.88
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$630.63
$184.88
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Accentra 5800 Series Cast Iron Surface Mounted Door Closer with Adjustable Spring Power

Professional Grade Cast Iron Door Closer for Commercial Applications

The Accentra 5800 Series Cast Iron Door Closer delivers professional-grade performance with rugged cast iron construction and ANSI/BHMA Grade 1 certification. Featuring adjustable spring sizes 1-6, rack and pinion operation, and tri-packed mounting options for regular, parallel, or top jamb installation, this non-handed closer provides versatile solutions for both retrofit and new construction applications where strength and durability are essential.

Professional Features & Benefits

  • AANSI/BHMA Grade 1 Certified
  • Adjustable spring sizes 1-6
  • Non-handed
  • Cast iron
  • Tri-packed: regular, parallel or top jamb mounting
  • Full plastic cover
  • Spring power adjustment
  • Hold open and heavy-duty arm configurations
  • Sleeve nuts included with all models

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
  4. Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
  5. Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
  6. Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Accentra Quality?

Accentra 5800 Series door closers deliver professional-grade reliability with cast iron construction and ANSI/BHMA Grade 1 certification for demanding commercial applications. The rack and pinion operation with adjustable spring sizes 1-6 ensures consistent performance and precise closing force control. Engineered for both retrofit and new construction where dependable door control performance is essential.

Product Specs

Product Group:
Door Controls
Product Subgroup:
Door Closers - Surface Mounted
Product Type:
Surface Mounted Door Closers
Commercial/Residential:
Commercial
Subcategory:
Door Closers - Surface Mounted
Product Category:
Door Controls
Department:
Door Hardware

Accentra YAL-5801 689 – Frequently Asked Questions

1) Will the Accentra 5800 door closer work on a parallel arm installation, or do I need a different model?
One box covers all three mountings. The 5800 Series cast iron closer ships tri-packed for regular arm, parallel arm, or top jamb mounting, and it's non-handed, so the same unit goes on a left or right hand door. That's the closer you want when you're standardizing a building and don't want to stock separate left/right or push/pull side part numbers.
2) What spring size do I need for a heavy exterior door, and can it be adjusted after install?
Spring power on the 5800 Series is field adjustable across sizes 1 through 6, so one closer covers everything from a light interior door up to a wide heavy exterior opening. You set the closing force on site with the spring power adjustment rather than ordering a fixed size. That's the range that matters on an entrance where wind load fights the closer, and it's why the same unit can be spec'd across a mixed building.
3) What's the difference between the hold open and non hold open versions of the Accentra 5800?
Hold open is an ordering choice, yes or no, on every arm configuration of the 5800. Hold open keeps the door parked at a set opening angle, which is what you want on a receiving door or a classroom door that gets propped anyway. Non hold open closes and latches every cycle, and it's the one to order on any door that has to stay closed for smoke or security. If the door is fire rated, order non hold open.
4) Does the Accentra 5800 come with a delayed action option for accessibility?
Delayed action is available. The 5800 is offered as regular, parallel or top jamb mount to a 3 inch reveal both with and without delayed action, in hold open and non hold open. Delayed action holds the door near full open for several seconds before the sweep begins, which is what you specify on a door someone in a wheelchair, on crutches, or pushing a cart has to get through.
5) How much frame reveal can the Accentra 5800 closer handle on a top jamb mount?
The standard arm packages on the 5800 mount regular, parallel, or top jamb to a 3 inch reveal. Measure from the face of the door to the face of the stop before you order. If your reveal runs deeper than 3 inches, a standard arm package won't reach and you need a different arm or a drop plate arrangement.
6) Do I still need a separate door stop if I install an Accentra 5800?
Not if you order the right arm. The 5800 is available with a Holder/Stopper Arm, and with a Holder/Stopper Arm with Spring, either one in hold open or non hold open. Those arms stop the door at the arm itself, so you skip the wall or floor stop, which matters where the door swings into a corridor with no wall behind it or into a drywall partition that won't take a stop. The plain tri-mount arm packages do not stop the door, so those openings still need a separate stop.
7) What is the closest Grade 1 cast iron equivalent to the Accentra 5800 door closer?
The Sargent 281 Powerglide is the nearest match in construction and rating: cast iron body, heavy duty, Grade 1, same as the Accentra 5800's cast iron Grade 1 build with adjustable spring sizes 1-6. If you want cast iron in a lighter power range, the LCN 1261 is also cast iron but rated light to medium duty with adjustable spring sizes 1-5, so it covers a narrower band of door weights than the 5800's 1-6 range.
8) I need a tri-mount Grade 1 closer with size 1-6 spring but a lighter aluminum body instead of cast iron. What are the options?
The Norton Rixson 8501A is a Grade 1 tri-mount surface closer with an adjustable size 1-6 spring, rated medium duty, and it matches the Accentra 5800's regular, parallel, or top jamb mounting flexibility without the cast iron body. The Sargent 1331 is a Grade 1 medium duty closer with a universal aluminum body, and the LCN 1450 is a medium duty cast aluminum closer with spring sizes 1-6. All three give you the same adjustable power band in a lighter housing than the 5800.
9) The frame reveal is deeper than 3 inches or the arm will not clear. What closer should I use instead of the Accentra 5800?
The Accentra 5800 arm options are built for regular, parallel, or top jamb mounting to a 3 inch reveal, so a deep reveal or an obstructed head calls for a different arm geometry. The Corbin Russwin DC5230 is a Grade 1 surface closer supplied with a slide track arm as standard for pull side mounting, and the Dorma 8916-JT is a Grade 1 heavy duty jamb track closer for frame face mounting on the pull side with an adjustable size 1-6 spring. Both use track hardware rather than a projecting arm.
10) I need a hold open closer. Which comparable models come configured that way instead of the Accentra 5800?
The Accentra 5800 is offered with hold open and heavy duty arm configurations, and hold open is selectable across its finishes. If you are sourcing hold open from another brand, the Orca Hardware BHDC1958HO/PA is supplied with a tri-packed hold open arm and a parallel bracket for 1-3/4 inch doors, and the Stanley Security A45-501HL is a long hold open arm standard for top jamb mounting. Note that the Orca BHDC1958RA/PA and BHDC1958DA/PA in the same series are tri-packed non-hold open arms, so the suffix is what determines the function.
11) I need delayed action. Which other door closers offer it besides the Accentra 5800?
The Accentra 5800 is available in a delayed action configuration on the regular, parallel, or top jamb mount to 3 inch reveal arm. From other manufacturers, the Orca Hardware BHDC1958DA/PA and BHDC2011DA/PA are both delayed action closers with a regular arm and parallel bracket for 1-3/4 inch doors, supplied as tri-packed non-hold open arms. Delayed action is what you want on accessible openings and healthcare corridors where a slower initial swing gives people time to pass through.
12) My spec sheet calls for an ADA barrier free closer. Which comparables are stated as barrier free or ADA next to the Accentra 5800?
The Cal-Royal 500S is a Grade 1 barrier free door closer with adjustable back-check, and the Cal-Royal N900PBF is a Grade 1 barrier free hydraulic surface closer. On the Calibre side, the CA9901 is a Grade 1 tri-pack arm ADA closer covering sizes 2-5 and the CA4001 is a Grade 1 ADA hydraulic closer with adjustable spring tension. The Imperial USA TC4300 is a Grade 1 heavy duty ADA closer with size 1-6 adjustment, which matches the Accentra 5800's spring range.
13) Can I use a Grade 2 closer like the Cal-Royal 400 where an Accentra 5800 is specified?
Not if the opening is spec'd Grade 1. The Cal-Royal 400 Series is a Grade 2 commercial hydraulic closer, one certification level below the Accentra 5800's ANSI/BHMA Grade 1. The Falcon SC91A is likewise Grade 3. If your drawing or facility standard calls for Grade 1, stay with peers that carry it, such as the Cal-Royal 700S dual valve sized closer with adjustable tube arm or the Corbin Russwin DC3200 Grade 1 regular arm surface closer for 1-3/4 inch doors.
14) What should I put on an aluminum storefront door instead of the Accentra 5800?
The Norton Rixson 1600 Series aluminum storefront closer with tri-style mounting is the one built for that opening, rated heavy duty and Grade 1. A narrow aluminum stile has far less mounting surface than the hollow metal or wood door the Accentra 5800 cast iron body typically goes on, so verify stile width before you order. The Falcon SC61A cast aluminum closer is another Grade 1 option in a light to medium duty rating.
15) Cast iron or aluminum door closer, which should I buy for a high traffic entrance?
Cast iron bodies take abuse better on doors that cycle constantly, and the 5800 Series is cast iron with a full plastic cover. If you want a cast aluminum body instead, the Falcon SC81A is a medium duty Grade 1 cast aluminum surface closer and the Falcon SC71A is the heavy duty cast aluminum unit. In the same cast iron family, the LCN 1261 is a cast iron surface closer with spring sizes 1-5, a narrower adjustment range than the 5800's 1-6.
16) What finishes does the Accentra 5800 closer come in, and will it match the other closers in my building?
Three finishes: 689 aluminum painted, 690 dark bronze painted, and BSP black suede powder coat. 689 and 690 are the standard BHMA finish numbers most commercial closers are supplied in, so a building already running 689 aluminum or 690 bronze closers will match. All three finishes are offered across every arm and hold open combination, so you aren't forced into a finish by the arm you need.
17) Can I use the Accentra 5800 to replace an existing surface closer without redrilling the door?
Sleeve nuts come with all 5800 models, which is what lets the closer pick up existing through-bolted holes on a door that already carried a closer. Combined with the tri-pack arm and non-handed body, the 5800 is set up for retrofit as well as new construction. Pull the old unit first and template the hole pattern against the new one, because no closer matches every prior brand's prep.
18) What else could I buy instead of the Accentra 5800 if I need a heavier duty closer?
For a step up in duty, the BEST EHD9000 Series is an extra heavy duty Grade 1 surface closer with adjustable spring sizes 1-6, and the Sargent 281 Powerglide is a heavy duty Grade 1 cast iron surface closer. The Sargent 1431 Powerglide is another heavy duty Grade 1 option with adjustable spring power. All three sit in the same Grade 1 tier as the 5800; the difference is the manufacturer's duty rating, which matters on entrance doors cycling all day rather than interior offices.
19) I need a Grade 1 tri-mount closer with a cover. What are my options besides the Accentra 5800?
The 5800 comes with a full plastic cover. Close equivalents: the Dexter DCH1000 Series is a Grade 1 tri mount surface closer with a full cover, and the Norton Rixson 8501A is a Grade 1 tri-mount closer with adjustable size 1-6 spring. If you specifically want it without a cover, the Arrow DCN325 is a Grade 1 tri-pack surface closer, less cover, with adjustable spring size 1-6.
20) What do I have to specify when ordering an Accentra 5800 closer?
Three choices settle the order. Finish (689 aluminum painted, 690 dark bronze painted, or BSP black suede powder coat), hold open or non hold open, and the arm package: standard tri-mount to a 3 inch reveal, that same tri-mount with delayed action, a Holder/Stopper Arm, or a Holder/Stopper Arm with spring. Spring power isn't an ordering decision, it's adjusted on site across sizes 1-6.
21) What is a lighter duty alternative to the Accentra 5800 for interior office doors that see low traffic?
The BEST SL6000 Series is a Grade 1 surface mounted closer with adjustable spring sizes rated light duty, and the Norton Rixson 160 Series is a Grade 1 light commercial surface closer with an adjustable spring. The Falcon SC91A is light duty as well but carries a Grade 3 rating rather than Grade 1, so if your facility spec calls for Grade 1 the SL6000 or 160 Series are the ones to stay with. All of these step down from the 5800's cast iron heavy commercial build.
22) What is the difference between the Accentra 5800 and the Arrow DCN325?
Both cover adjustable spring sizes 1-6 and both ship tri-packed for regular or parallel arm mounting. The difference is the cover and the duty class: the Accentra 5800 is cast iron with a full plastic cover included, while the Arrow DCN325 is supplied less cover and is rated light duty. The Arrow DCN314 in the same line is also less cover and light duty but adjusts only across spring sizes 1-4, so it covers a narrower door weight range than either the DCN325 or the 5800.
23) Is the Arrow DCN500DP drop plate a substitute for an Accentra 5800 closer?
No. The Arrow DCN500DP is a parallel drop plate for the DCN500, a mounting accessory rather than a closer, so it will not replace an Accentra 5800. The same caution applies to the Stanley Security 327 and 341 wardrobe pivots and the Stanley 57-0100 steel machine screws for architectural hinges, which turn up alongside closers but are pivots and fasteners. If you are replacing a 5800 you need a surface mounted closer such as the Sargent 281 or the BEST HD8000.
24) Which Grade 1 tri-mount closers can I standardize on across a facility alongside the Accentra 5800?
The Accentra 5800 is tri-packed for regular, parallel, or top jamb mounting, so one part number covers three mounting conditions. Peers built the same way include the Dexter DCH1000 Series, a Grade 1 surface closer with tri mount and a full cover, the Dexter DCM1000 and DCL2000 Series Grade 1 tri mount closers, the Norton Rixson 1601P Grade 1 tri-mount with 180 degree swing, and the Dormakaba 8616 with a flat non-hold open arm supplied tri-pack. Standardizing on tri-mount hardware means the same stock part fits push side and pull side openings across the building.
25) The Accentra 5800 offers a holder/stopper arm. Which other closers give me a stop function built into the arm?
The Accentra 5800 comes in holder/stopper arm and holder/stopper arm with spring configurations, which combine the closer and the door stop in one assembly so you do not need a separate floor or wall stop. Among the peers, the Corbin Russwin DC6200 and DC8200 Series are Grade 1 surface closers with double lever regular arms for pull side mounting on 1-3/4 inch doors, and the Design Hardware 116, 316, and 416 Series are tri-packed non-hold open arm closers in medium to heavy duty. Confirm the arm assembly you order carries the stop feature, since arm style is what determines it.
26) I need backcheck control to protect the wall behind the door. Which closers state it besides the Accentra 5800?
The BEST HD7000 Series is a Grade 1 medium duty surface closer with adjustable spring power and backcheck control, and the Cal-Royal 500S is a Grade 1 barrier free closer with adjustable back-check. The Norton Rixson 1600BC Series aluminum storefront closer is heavy duty and Grade 1. Backcheck slows the door near the end of its opening swing, which matters on windy exterior entrances and anywhere the door would otherwise hit a wall.
27) Is the Accentra 5800 door closer suitable for a house, or is it a commercial product?
It's a commercial product. The 5800 Series is classified commercial, cast iron, ANSI/BHMA Grade 1, and it's specified into office buildings, schools, healthcare, retail, warehouses, multi-tenant residential, and government facilities. On a light residential interior door it's more closer than the door needs and the spring sizes 1-6 range is aimed at commercial openings.
How fast can I get the Accentra YAL-5801 689 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Accentra YAL-5801 689 come with a warranty?
Absolutely. The Accentra YAL-5801 689 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Accentra YAL-5801 689?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Accentra YAL-5801 689 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!