Klein Tools P12 #0 Phillips Po...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$60.53
$7.71
Klein Tools P12 #0 Phillips Pocket Clip Screwdriver

Klein Tools P12 #0 Phillips Pocket Clip Screwdriver

(No reviews yet) Write a Review

Model: P12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$60.53
$7.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
#0 Phillips Pocket Clip Screwdriver

  • Warnings

    • Do NOT use to pry or chisel.
    • Always wear approved eye protection.
    • NOT insulated. Will NOT protect against electrical shock.

  • Features

    • Meets or exceeds applicable ASME / ANSI specifications
    • Nickel-chrome, precision-forged and polished blades with black tips
    • Round-shank, Phillips-tip screwdriver with convenient pocket clip
    • Internal flanges provide solid, twist-resistant shaft anchor
    • Made in USA
    • Chrome-plated shaft helps prevent corrosion
    • Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably


P12 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Handle Color:
Yellow
Handle Material:
Plastic
Insulated:
No
Item Depth:
5.0000 in
Item Height:
1.0000 in
Item Weight:
0.0500 lbs
Item Width:
1.0000 in
Magnetic:
No
Overall Length:
5" (12.7 cm)
Shank Length:
2.5" (6.4 cm)
Shank Type:
Round
Tip Size:
#0
Tip Type:
Phillips
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Material:
Steel
Product Weight:
0.8 oz (23 g)
Product Type:
Screwdriver
Product Depth:
5 in
Product Height:
1 in
Country Of Origin:
United States
Product Width:
1 in

Klein Tools P12 – Frequently Asked Questions

1) Is the Klein Tools P12 screwdriver safe to use on live electrical circuits?
No. The P12 is not insulated and will not protect against electrical shock. Keep it off energized work and use a properly rated insulated driver for anything live. It is a general-purpose precision Phillips driver, not a VDE-style tool.
2) What screw size does a #0 Phillips driver like the Klein P12 actually fit?
The P12 carries a #0 Phillips tip, the smallest of the common Phillips sizes. That is the size for thermostat terminals, device plate and small panel screws, electronics, and control board hardware. If you are driving standard outlet and switch screws you want a #1 or #2 instead, since a #0 will cam out and chew the recess.
3) How long is the Klein P12 pocket clip screwdriver, and will it reach into a deep box?
Overall length is 5 inches with a 2-1/2 inch round shank, so the usable reach past the handle is only about two and a half inches. That is fine for terminal screws at the face of a device or a panel door, but it will not reach the back of a deep enclosure. For that you need a long-shank driver.
4) Is the tip on the Klein P12 magnetic for holding small screws?
No, the P12 tip is not magnetized. With #0 screws that means you are holding the fastener by hand to start it. If you need the screw to stay on the tip, pick a magnetized precision driver or magnetize the tip yourself.
5) Will the Klein P12 clip into a shirt pocket or tool pouch without being bulky?
It is built for that. The P12 weighs 0.8 oz (23 g) and runs 5 inches long with a pocket clip on the handle, so it rides in a shirt pocket like a pen. Techs who carry one driver for thermostats and low-voltage terminals usually clip this one.
6) What is the Klein P12 blade and handle made of, and will it hold up in a service bag?
The blade is nickel-chrome, precision forged and polished with a black tip, on a chrome-plated shaft that resists corrosion. The handle is Klein's amber Comfordome plastic with internal flanges that anchor the shaft against twisting. It is steel-bodied and meets or exceeds applicable ASME/ANSI specifications. One caution: it is not a pry bar or chisel, and side-loading a #0 shank will snap it.
7) Is the Klein P12 screwdriver made in the USA?
Yes, the P12 is made in the USA. That matters for institutional and government buyers working to domestic sourcing preferences on MRO tool purchases.
8) What is the Klein part number to reorder this pocket clip screwdriver?
Order it as Klein Tools P12. That is the single model for the #0 Phillips round-shank pocket clip driver, so there is no handing, length, or finish option to specify.
How fast can I get the Klein Tools P12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools P12 come with a warranty?
Absolutely. The Klein Tools P12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools P12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools P12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!