Minerallac 1-1/2" Wire Formed ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$51.43
$1.93
Minerallac 1-1/2" Wire Formed Bridle Ring with 1/4"-20 Thread and Zinc Plated Finish

Minerallac 1-1/2" Wire Formed Bridle Ring with 1/4"-20 Thread and Zinc Plated Finish

(No reviews yet) Write a Review

Model: 646R

In Stock (leaves warehouse same day if ordered before 3pm ET)

$51.43
$1.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Minerallac 1-1/2" Wire Formed Bridle Ring with 1/4"-20 Thread and Zinc Plated Finish

Professional Low-Voltage Cable Support Solution

The Minerallac wire formed bridle ring delivers reliable support for low-voltage datacom cable installations with its 1-1/2" diameter design and 1/4"-20 threaded mounting system. Constructed from steel with zinc plated finish for corrosion resistance, this bridle ring provides secure cable management in professional telecommunications and data center applications.

Professional Features & Benefits

  • 1-1/2" Ring Diameter: Provides optimal cable clearance and support for low-voltage datacom applications without cable stress or damage.
  • Wire Formed Steel Construction: Delivers superior strength and durability for reliable long-term cable support in demanding installations.
  • Zinc Plated Finish: Offers enhanced corrosion resistance and extended service life in various environmental conditions.
  • 1/4"-20 Thread: Ensures secure mounting compatibility with standard hardware for versatile installation options.
  • 50 Load Rating: Provides adequate support capacity for multiple cable runs while maintaining structural integrity.
  • 0.162" Thickness: Optimized material thickness balances strength with efficient material usage for cost-effective installations.
  • USA Manufacturing: Ensures consistent quality standards and reliable supply chain for professional projects.

Technical Specifications

  • Construction: Wire Formed
  • Country Of Origin: United States
  • Load: 50
  • Product Finish: Zinc Plated
  • Product Material: Steel
  • Product Size: (Ring Diameter) 1-1/2
  • Product Type: Bridle Ring
  • Thickness: 0.162
  • Thread Impression: 1/4"�20

Professional Applications

  • Data Center Cable Management
  • Telecommunications Infrastructure
  • Commercial Network Installations
  • Professional Office Buildings
  • Industrial Communication Systems
  • Low-Voltage Cable Support Systems
  • Structured Cabling Projects

Why Choose Minerallac Quality?

Minerallac bridle rings combine USA manufacturing quality with proven steel construction and zinc plated corrosion protection. The wire formed design and precise 1/4"-20 threading ensure reliable performance and easy installation for professional cable support applications requiring dependable long-term service.

Manufacturer Resources

Product Specs

Construction:
Wire Formed
Country Of Origin:
United States
Load:
50
Product Finish:
Zinc Plated
Product Material:
Steel
Product Size:
(Ring Diameter) 1-1/2
Product Type:
Bridle Ring
Thickness:
0.162
Thread Impression:
1/4"–20
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
J-Hooks & Bridle Rings

Minerallac 646R – Frequently Asked Questions

1) What thread does the Minerallac 646R bridle ring use for mounting?
The 646R bridle ring has a 1/4"-20 male thread, so it threads into any 1/4-20 tapped hole, insert, or anchor. Common mounting routes are a 1/4-20 threaded rod coupling, a tapped beam clamp, or a 1/4-20 drop-in anchor in concrete deck. The anchor or clamp is a separate purchase, so order the mounting hardware along with the rings.
2) How much cable will a 1-1/2 inch bridle ring hold?
The ring opening is 1-1/2 inches in diameter, which is the clear space you have for cable. For Cat5e/Cat6 in the roughly 0.21 to 0.25 inch range, that is a modest bundle, and good practice is to leave the bundle loose in the ring rather than packing it full so the cable is not compressed. For larger bundles, step up to a bigger ring diameter or move to a J-hook with a wider saddle.
3) Is a zinc plated steel bridle ring OK for outdoor or damp locations?
Zinc plated steel is a corrosion-resistant finish meant for dry interior commercial use, which is where the 646R belongs: office buildings, telecom rooms, data centers, and industrial interiors. For exterior runs, wash-down areas, or coastal exposure, zinc plating will eventually sacrifice and rust, so specify a stainless or hot-dip galvanized support instead.
4) Should I use a bridle ring or a J-hook for a low-voltage cable run?
A bridle ring like the 646R is a closed loop, so cable gets threaded or fed through it. That makes it good for small, fixed bundles and for spots where you want the cable captured on all sides, and it mounts off a single 1/4-20 point. A J-hook is open on top, so you drop cable in from above, which is faster on long runs and easier to add to later. For a few pairs of Cat6 down a corridor or into a telecom room, the ring is the simpler and lower-profile support.
5) Can I run electrical power conductors through a bridle ring like this one?
No. The Minerallac 646R is a low-voltage cable support for datacom and communications cabling, not a raceway or a listed support for branch-circuit wiring. Power conductors have to be in conduit, cable tray, or another support method accepted for that wiring method. Keep the ring for structured cabling, coax, fiber, and similar low-voltage runs.
6) Is the Minerallac bridle ring made in the USA for a Buy American project spec?
The 646R bridle ring is manufactured in the United States, so it supports domestic-content requirements on federal, institutional, and school work where supports and fasteners have to be US made.
7) I need to standardize cable supports across a building. What exactly do I order to repeat this ring?
The part to call out is Minerallac 646R: a wire formed steel bridle ring, 1-1/2 inch ring diameter, 1/4"-20 thread, zinc plated. Spec that number and every ring in the building matches on diameter, thread, and finish, which also means one anchor type and one driver on the cart.
How fast can I get the Minerallac 646R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac 646R come with a warranty?
Absolutely. The Minerallac 646R is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac 646R?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Minerallac 646R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!